Top Low impedance Output

Hosa DIB-443 1/4\ TS to XLR3M Sidekick Passive DI Box

  • Use the Sidekick to “go direct” for a pure, clean, noise-free tone that is perfect for digital signal Processing (DSP) or throw the INST/line switch to line position to allow your amp to drive the line for a natural, overdriven tone.
  • The Sidekick passive DI box by hosa technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console.
  • Any Electronic musical instrument with a mono phone output.
  • Passive Direct Box For Guitar And Bass High-Quality Isolation Transformer To Change High Impedance.
  • Into A Low Impedance Output For Sending Long Distances Via Balanced Microphone Cable Or Stage.
  • Snake Imparts A Slight Gain To The Signal Hi-Z Output For Sending To On-Stage Amp Ground Lift.
Check Stock

Rockville BLUAMP 150 Home Stereo Bluetooth Amplifier Receiver Optical/Phono/RCA

  • ... 2 watts RMS and 300 x 2 watts peak. 8 Ohms: 40 x 2 watts RMS and 160 x 2 watts peak. Plays Bluetooth/USB/SD. RCA aux input. Phono RCA input for turntables. Optical input. (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control..
  • (2) sets of RCA Audio Outputs to connect to a subwoofer or another amplifier. Built in Bluetooth 5.0 with 33 foot range. 2 sets of binding post speaker output terminals. Bass/Treble/Balance/Mic Volume/Mic Echo and Master Volume controls..
  • Built-in Cooling Fan. Built-in Pre-Amplifier with low distortion. Class D circuit with great sound quality. Solid metal construction with brushed aluminum front panel. Multi function volume knob . LCD Display / Touch Buttons. Frequency Response (±3dB): 50 Hz- 20 KHz..
  • AUX Input Impedance: 10k Ohms. AUX Input Sensitivity: 300mV. Phono input impedance: 47K. Phono input sensitivity: 20mV. Output Impedance: 4-8 ohm. Total Harmonic Distortion(THD): ≤0.5%. Signal-to-Noise Ratio(S/N): ≥78dBA. USB: Supports WAV/MP3/WMA. 110-220V.
Check Stock

High Low Level Impedance Adaptor - Car Audio System RCA Line Output Converter Adapter w/ Adjustable Level Control - Works on Vehicle Amplifier, Equalizer, Home Theater Setup - Legacy LN60

  • CONVERTS TO RCA: The Legacy High/Low Level Impedance Adaptor provides an easy solution to a car audio system that doesn't have the proper connections for an equalizer or amplifier. It converts high level speaker output to RCA line level.
  • UNIVERSAL FIT: Hooks up to any domestic and foreign car models. Adds RCA line outputs so you can hook up equipment like a powered amplifier to your vehicle sound system. Also works with home audio equipments like for home theater setup applications.
  • ADJUSTABLE LEVEL CONTROL: The line output converter features adjustable level control providing a high quality with super low distortion end result.
  • EASY INSTALLATION: Features easy and hassle-free installation for convenience. Simply connect the stereo’s speaker wires to the line output converter’s inputs and use the RCA cables to run the signal from the LOC to your amplifier.
  • WORRY-FREE SHOPPING: With the Legacy LN60 High/Low Level Impedance Adapter we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked.
Check Stock

High Low-Level Impedance Adaptor - Car Audio System RCA Line Output Converter Adapter w/ Adjustable Level Control - Works on Vehicle Amplifier, Equalizer, Home Theater Setup - Pyramid NS60

  • CONVERTS TO RCA: The Pyramid High/Low Level Impedance Adaptor provides an easy solution to a car audio system that doesn't have the proper connections for an equalizer or amplifier. It converts high level speaker output to RCA line level.
  • UNIVERSAL FIT: Hooks up to any domestic and foreign car models. Adds RCA line outputs so you can hook up equipment like a powered amplifier to your vehicle sound system. Also works with home audio equipment's like for home theater setup applications.
  • ADJUSTABLE LEVEL CONTROL: The line output converter features adjustable level control providing a high quality with super low distortion end result.
  • EASY INSTALLATION: Features easy and hassle-free installation for convenience. Simply connect the stereo speaker wires to the line output converter inputs and use the RCA cables to run the signal from the LOC to your amplifier.
  • WORRY-FREE SHOPPING: With the Pyramid NS60 High/Low Level Impedance Adapter we are confident of the quality of our product, therefore, we offer a 30 day money back no questions asked.
Check Stock

AudioPipe XV-BXP-SUB 15V Car Audio System Digital Sound Equalizer Epicenter Enhancer Restoration Signal Processor Bass Booster w/ Remote Knob, Black

  • SIGNAL PROCESSOR BASS BOOSTER: XV-BXP-SUB digital bass booster helps you control the amount of bass in your sound system for maximum music enjoyment.
  • DASH-MOUNTED KNOB: Dash-mount bass knob allows you to fine-tune your low notes.
  • POWER REQUIREMENTS: 15-volt RMS max with 13.5-volt peak output max.
  • High headroom pulse width modulated (PWM) power supply.
  • FREQUENCY RESPONSE & IMPEDANCE: 10K-ohm input impedance and 150-ohm output impedance.
  • 0 hertz to 100-kilohertz frequency response.
  • NOISE SPECIFICATIONS: Total harmonic distortion is 0.003 percent.
  • Balanced input noise rejection: less than 60 decibels.
Check Stock

Donner Special-Ⅰ Professional High-Performance Passive DI-Box Unit Hum Eliminator 1/4\ instrument Direct Box to balanced & unbalanced XLR

  • 【Heavy-duty】Professional and multi-purpose direct injection box for stage and studio applications.
  • 【High sound quality】Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers.
  • 【Clean and pure 】Ultra-flat frequency response due to renowned Donner LAB-S1 transformer .The transformer also helps eliminate hum and buzz caused by ground loops by isolating the input from the output..
  • 【Robust circuit design】Converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
  • 【Low noise】Ground Lift switch eliminates typical ground loop problems .Send the thru signal to your amp and the output to the PA system. Transformer isolation eliminates nasty hum and buzz caused by ground loops..
Check Stock

SFB-1500D - Sundown Audio Monoblock 1750w RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Sundown Audio SIA-2500D Monoblock 2500W RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Rockville PPA20 Preamp Professional 1U Rack Mount Pre-Amplifier w/Crossover+EQ, Black

  • Rockville PPA20 Rack Mount Pre-Amplifier. 1U Rack Size. 1/4" microphone input. RCA PHONO / AUX1 / AUX2 / AUX3 / AUX4 / AUX5 inputs. 1/4" headphone output. RCA REC / LINE outputs. XLR master output ( left, right ). Headphone volume & Microphone volume controls. 3 band EQ (Treble / Mid / Bass). Master volume. L / R balance. Input source switch. Mono / Stereo switch. Mute.
  • Low Cut Switch allows you to cut off certain frequencies which comes in handy when using turntables, subs, and other gear. This function will allow you to play your music louder, with lower distortion and make your speakers last longer. Treble / Bass control. Loudness compensation circuit which at low-to-medium volume boosts the bass and treble response. Tape Monitor . Ground lift switch.
  • Unit dimensions: 18.89” x 6.49” x 1.73” inches. Unit weight: 4.43 lbs. Shipping dimensions: 20.47” x 8.46” x 4.33” inches. Shipping weight: 5.73 lbs.
  • Inputs Sensitivity/Impedance. Mic: 1mV / 3 Kohms. Phono: 3mV / 47 Kohms. Tape, Tuner, CD, Aux: 150mV / 22 Kohms. Output/Impedance. Tape Rec: 150mV / 3 Kohms. Pre Output: max. 11V / 1 Kohms. Total Harmonic Distortation. Mic: less than 0.02%. Phono: less than 0.04%. Tape, Tuner, CD, Aux: less than 0.01%. Signal To Noise Ration. Mic: more than 70 ....
Check Stock

Sundown Audio SFB-3000D 3000W RMS Class D Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 20

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock