Top Low power

80x100 Monocular-Telescope Low Night Vision Monoculars High Definition for Adults High Powered with Smartphone Adapter Monocular Telescope Hunting Wildlife Bird Watching Travel Camping Hiking

  • 80x100 Monocular-Telescope Low Night Vision Monoculars High Definition for Adults High Powered with Smartphone Adapter Monocular Telescope Hunting Wildlife Bird Watching Travel Camping Hiking.
Check Stock

1000W Solar Wind Hybrid Kit 12V Battery Charger: 5pcs 120W Monocrystalline Solar Panel,400W Wind Turbine Generator,Hybrid MPPT Charge Controller & 1000W Inverter & Brackets

  • Fear of low power in rainy and cloudy weather ? This 1000w Solar Wind Hybrid Complementary System charge 12v battery, Solving the pure solar panel system low efficiency problem in low temperature and strong wind.help you to generate power for remote areas in all seasons and save energy..
  • 120w monocrystalline solar panel, Compared with other 3 grid solar panels on the market, our 5 grid panels is greatly improved in power, the secret of fast charging, sufficient power generation and long Service life..
  • 400W wind turbine generator, higher efficiency.Starting wind speed can be as low as 2.5m/s, more powerful.Easy to assemble,Low noise,Hermetically sealed to ensure dust and rain can not intrude into the interior of wind turbine..
  • Wind&Solar Hybrid MPPT Controller:with Dump Load,Color Screen Display, the MPPT control algorithm used for fan charging ensures MPPT charging at low wind speed.Fan three-stage charging mode.
  • 12V/24V automatically recognizes,protection functions such as overcharge, over discharge and overload.
  • Lead-acid battery, ternary lithium battery, lithium iron phosphate, custom four battery types charging mode to choosing.
  • Perfect for all off-grid installations on Roof,RV,motorhome, house,home,garage,garden,cabin,shed,boats greenhouse,ect.also c....
Check Stock

Arduino MKR WAN 1310 [ABX00029]

  • The perfect IoT node and building block for adding to Lo-Ra connectivity to low power wide area IoT devices.
  • Very long battery life - the latest low power architecture means the power consumption is able to go as low as 104uA for extended battery life. It is also possible to use the USB port to supply power (5V) to the board, so you can run the board with or without batteries.
  • Local storage - On board 2MByte Flash to facilitate data logging and Over-The-Air (OTA) functions.
  • Enhanced Security - credentials and certificates are stored in the boards crypto chip, an embedded secure element.
  • Powerful - The MKR WAN1310 is based on the Atmel SAMD21 microcontroller and a Murata CMWX1ZZABZ Lo-Ra module.
Check Stock

Hifonics BG-2500.1D Brutus Gamma Monoblock Super D Class 2500 Watt Car Audio Sound System Subwoofer Speaker Amp Amplifier

  • 1-ohm stable monoblock operation for maximum power.
  • High/speaker level and low level/RCA input.
  • Variable 12dB high and low pass crossovers.
  • 12dB bass boost increases low octave harmonics.
  • 1800 phase shift improves low octave dynamics.
  • 4-gage power wire and 8-gage speaker wire outputs.
  • Military grade PCB w/ PWM MOSFET power supply.
  • Direct short, thermal, and overload circuit protection.
Check Stock

BOSS Audio Systems AR1500M Car Amplifier - 1500 Watts Max Power, 2 4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db..
Check Stock

BLAUPUNKT AMP4000D 4000W Max 1-CH Monoblock Class D Stereo Car Audio Amplifier

  • Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms, 8000 Watts Max x 1 @2-Ohms Bridged.
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
  • Strapping Capable - You are able to strap two AC4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a numb....
Check Stock

Planet Audio AC2500.1M Monoblock Car Amplifier - 2500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 2500 Watts at 2 Ohms into one channel. Maximum Power output of 1250 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the AC2500.1M to your factory radio or aftermarket radio that does not have low-level (RCA) inputs..
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AC2500.1M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will primarily keep high notes out of your subwoofer(s).
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

NC ZOKOP B25UXP45-A90 / Red 23L / 0.9cuft Retro Microwave with Display/Silver Handle

  • 1. Five power levels: HIGH (100% power output)-M. High (80% power output)-Med (60% power output)-M. Low (40% power output)-LOW (20% power output) . This microwave oven is specially designed to meet your various cooking needs.
  • 2. 360° rotation and uniform heating: 360° heating and glass turntable rotation during operation make food cooking more uniform, thereby improving cooking efficiency. Therefore, you will enjoy fresh and delicious food in a short time. At the same time, the detachable design is convenient for cleaning after each operation.
  • 3. Customizable automatic cooking mode: The retro microwave oven defaults to 8 cooking menus, which are suitable for popular foods such as popcorn, pizza, and potatoes. After selecting the menu, enter the menu weight selection and press the "start" button to start cooking. Automatic cooking program menu operation brings convenience and efficiency to your life.
  • 4. Indoor lights and child locks: indoor lights that can be viewed without opening the door. The safety lock prevents children from operating unattended. Use the child safety lock option to lock the control panel to prevent accidental use or contact by children 5. Retro decoration: stylish chrome door handles, control panels and decorations add fun an....
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ...et the gain over a gain range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi....
Check Stock

Coast® G26 330 Lumen Bulls-Eye™ Spot Beam LED Flashlight Batteries Included

  • Bulls-Eye Spot Beam Optic: Consists Of An Extremely Bright, Centered ‘Hot Spot’ And A Very Consistent Transition Halo To Increase The Effective....
  • Quick-Cycle Switch: Control Your Light Power With The Push Of A Button. Cycle Between High Power And Low Power Options.
  • Specs: Light Output 330 Lumens (High), 80 Lumens (Low). Beam Distance: 130 Meters (High), 60 Meters (Low). Runtime: 4.25 Hours (High), 13 Hours (Low).....
  • Ip54 Rated Design For Water Resistance And Durable Body For 1-Meter Drop Protection.
Check Stock

Boss Audio Systems R1100M 1100W Monoblock Class A/B Car High Power Amplifier with Bass Remote Control and AKS8 Amplifier Installation Wiring Kit

  • AMPLIFIER: 1100-WATT POWER: Peak power of 1100 watts, RMS power of 825 watts.
  • HI/LOW LEVEL INPUTS: Subwoofer level control and high and low level inputs.
  • SWITCH UP THE BASS: Switchable Bass Boost and Variable Low Pass Crossover.
  • AMP SPECIFICATIONS: Includes bass remote control.
  • Dimensions (L x W x H): 9.125 x 10.4375 x 2.25 inches.
  • WIRING KIT: 20 foot 8 gauge red power cable.
  • 20 foot high performance RCA interconnect.
Check Stock

Schiit Magni 3+B Headphone Amplifier and Preamp

  • With a full 2400mW into 32 ohms, Magni 3+B has tremendous power reserves, low distortion, an exceptionally low noise floor, and switchable gain..
  • From IEMs to hard-to-drive planar designs, Magni 3+B has the power, performance, low noise, and versatility to meet the needs of your headphones..
  • Includes preamp outputs that you can connect to your desktop powered monitors for a complete system, or to a speaker power amp and use it as a preamp..
  • With its built-in time-delayed start-up and instant shut-down, there’ll be no glitches or pops through either headphones or speakers..
  • The ultimate expression of an affordable, all-discrete, current-feedback, headphone amp. Product is supplied with a 110–120V US power supply suitable for use in the United States, Canada, and Mexico. This power supply will not work in 220 – 240V countries. Magni 3+B is designed and built in Texas, USA..
Check Stock