Top Lq10d42 Lm64k101

Elgin industries Hydraulic NON AFM Roller Lifters & Trays compatible with 1997-2016 Chevy 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 LS7 LIFTERS & TRAYS KIT

  • Fits 1997-2016 Chevy 5.3 5.7 6.0 LS1 LS2 LS3 LS7 LS6 LQ4 LQ9 LY5 LY6 LM7.
  • Buy From Engine Parts Centers and You will receive Elgin Industries Products!!.
Check Stock

Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

GT35 Turbo AN4 Oil Feed Restrictor Fitting Inlet T25 T28 GT25 GT28 T3 M12 x1.0

  • This Oil Diverter Barbell is Compatible with all GM LS-Series Engines including LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77..
  • Using this Aluminum Oil Passage Barbell Plug Replace Old or Worn Out to Prevent Oil Seepage in Your Oil Passage..
  • The upgraded product CNC machining has fewer tolerances and smaller gaps, which prevents dust from entering the oil and keeps the oil clean..
  • The diverter was designed with a little taper, which will make oil flow smoothly. 1/4-20 Thread end made it convenient for loading or unloading. Viton O-ring has better corrosion and aging resistance, lasts a long time..
  • Professional installation is recommended. According to our customer experience, you can use a small rubber mallet to tap to install go in, different models may have size differences, if you think the size is too large, you can lightly sand the edge of this barbell to fit, or lubricate the contact parts for better Install. It's easy to do, and you'll save a lot..
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Elgin Industries EP108BR Expansion Plug Kit

  • Comes with 4ea Cylinder Head Dowel Pins, 1ea Oil Galley Barbell, 1ea Threaded Coolant Passage Plug, 3ea Threaded Oil Galley Plugs, and 1ea Press in Freeze Plug. Contains all Required Plugs for Completing an Engine Rebuild..
  • Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve..
Check Stock

LKONWEE Billet Aluminum Oil Diverter Barbell Oil Restrictor Galley Plug Fits GM Gen III & IV LS Engines LS1 LS2 LS3 LS6 LS7 LS9 LQ4 LQ9 4.8L 5.3L 6.0L 6.2L

  • Compatible with all GM LS Series Engines inclued LS1 LS2 LS3 LS6 LS7 LS9 LQ4 LQ9 4.8L 5.3L 6.0L 6.2L LM7 LR4 L59 LM4 L33 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG L98 L9H L20 L94 LZ1 L99 L96 LC8 L77.
  • Compatible with GM Gen III & IV Engines..
  • Directly to replace the factory plastic barbell，machining have less tolerance, makes the gap smaller,makes the gap smaller, so that it can prevent dust from entering oil and keep it clean..
  • It was designed with a little taper, which will makes oil flow smoothly,can effectively prevent the loss of engine oil, increasing the use of flow..
  • Made of quality billet aluminum material. 1/4-20 threaded hole aids in easy removal..
  • When using the barbell, please wipe the using part cleanly and Lube the Oring. Then insert the barbell and screw it in with firm pressure..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • ...ing. For durablity and long service time. Kits comes with necessary block, bolts and washers for solid repair..
  • The Exhaust Manifold Bolt Repair Kit Compatible with L20, L31, L33, L59, L76, L77, L83, L86, L8T,L92, L94, L96, L98, L99, L9H, LC9, LFA, LH6, LH8, LM4, LM7, LMG, LQ4, LQ9, LR4,LS1, LS2, LS3, LS4, LS6, LS7, LS9, LSA, LSX376, LSX454, LSX454R, LT1, LT2, LT4,LT5, LY2, LY5, LY6, LZ1.(Fits for GM Vehicles, Silverado, Sierra, Yukon, Denali, Escalade, Hummer ).
  • If any issues from our products arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because do the best we can do that and you deserve the best..
Check Stock

Akozon 16pcs C5 Filter Fuel Injection Line Fitting Adapter Kit OE: GF822 10299146 19239926 Fit for LS1 LS2 LS6 LS3 LQ4

  • 【Application】The Fuel Line Kit fits for LS1, LS2, LS6, LS3, LQ4, LQ9, LM7, L99, L76, LSX..
  • 【OE Number】Replacing OE numbers for reference: GF822, 10299146, 19239926. Built to meet standard specification, strictly follow factory quality control..
  • 【Practical Accessories】The Fuel Line Kit includes 1pcs C5 fuel filter, 1pcs high pressure fuel injection hose, 1pcs LS fuel rail adapter 5/16, 2pcs LS fuel rail adapter 3/8, 1pcs LS filter connector 3/8 (Already Installed in the Filter), 2pcs AN6-1/4NPS, 2pcs AN6-45° straight fittings, 6pcs AN6-0° straight fittings..
  • 【High Quality】New and quality Fuel Line Kit, manufactured with the highest quality aluminum + rubber material, high strength for maximum durability, high reliability..
  • 【Simple Installation】Simple and convenient to install, no complicated tools required. If you understand your vehicle perfectly, you can choose to install it yourself..
Check Stock

PQY LS Heater Core Bypass Hose Coolant Crossover + 2pcs Clamp for LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551699

  • Made of high quality sicilone,come with 2pcs stainless steel clamps..
  • Oil, Coolant and Fuel-Resistant Finish,easy to clean.Good for deleting the heater on your LS swapped vehicle..
  • HOSE ENDS: One end is 5/8 and the other is 3/4..
  • For LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77.
  • PQY CUSTOMER SERVICE:If you have any problem ,please contact us and we will respond you in 24 hours except weekends and holidays..
Check Stock

True Induction 10-Piece Tri-ply Stainless Steel Induction Cookware Set

  • Stainless Steel Induction Ready Premium Cookware.
  • Xternal positioned rivets on stainless steel handles for for food safety and lifetime performance..
  • Perma-bond tri-ply stainless steel construction Comes with lifetime warranty.
  • 6.74 Liquid Quart (LQ) Pot, 7.14 LQ Wok, 4.13 LQ Sauce Pan, 2 LQ Sauce Pan, 2.45 LQ Saute Pan, and a 1.42 LQ Saute Pan all dishwasher safe..
  • Tri-Ply Stainless Steel construction eliminates hot spots and ensures even heat distribution along the bottom and side walls of the cookware.
Check Stock

A-Premium Engine Valve Lifter Replacement for 300 Dodge Challenger Charger Durango Magnum Jeep Commander Grand Cherokee Ram 1500 2500 3500 4500 5500 2005-2018 Front OHV Engine Only 2-PC

  • Brand new lift, high-performance GM hydraulic roller lifters with performance reaching or surpassing HL124/12499225. Professional installation is recommended..
  • Lifters fit LM7 LS1 LS2 LS3 LS4 LS6 LS7 LS9 LSA LSJ LSX LSY LQ4 LQ9 LY5 LY6 4.8L 5.3L 5.7L 6.0L 6.2L Use these lifters along with an LS3 Valley cover to eliminate DOD ( Displacement on Demand) used in newer model engines.
  • Manufactured with high-quality durable materials and precision CNC machining, it can meet the requirements of racing lifters and can withstand continuous high-speed operation. All parts withstand rigorous quality testing before being sold..
  • The valve lifter will effectively fill all the gaps of the valve train, and there is no gap between the roller and the convex shaft, so as to avoid the knocking sound of the hydraulic lifter. To achieve long-term use, maintenance-free performance design..
  • For protecting the product, the package may contain oil, that's normal. We have upgraded the encapsulation to prevent oil leakage as much as possible. Any questions, please contact seller for help..
Check Stock