Top Ls Engine For Turbo

Sealed Power 1404M Camshaft Bearing Set

  • 【Application】for Chevy G/M LS Engine, LS1, LS2,LS3,LS6, LQ9.
  • 【Cam Bearing Installation Tool】This tool is used to remove and install cam bearings. Professsional cam bearing tool for all LS based engines. This tool is a must when installing cam bearings in big block for Chevys..
  • 【Note】This is a must have for the LS engine builder, you can save time and money by installing your own cam bearings..
  • 【Using Our Cam Bearing Installation Tool】You can remove the old cam bearing and install the new cam bearing like a professional. Easy to install, which helps to keep the cam bearing in the correct position.
  • 【Durable】Made of 45# steel ,maximum durability, the total length is 33 inches, and the end is detachable..
Check Stock

JEGS Twist-On Valve Cover Breather | 1 Per Package | Fits 1997-Up GM LS Series, 1996-1997 GM LT4, And 1989 Pontiac Turbo Trans Am

  • FITS 1997-Up GM LS Series, 1996-1997 GM LT4, And 1989 Pontiac Turbo Trans Am.
  • REPLACeS the factory oil fill tube on the passenger side OE valve cover.
  • FUNCTIONS to vent accumulated pressure in the crankcase and to reduce oil temperature.
  • INSTALLATION RESULTS in increased engine oil life and possibly prevents a failed engine seal resulting from excessive crankcase pressure.
Check Stock

Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX

  • Chelhead LS flywheel locking tool Compatible with Chevy LS 1 2 3 LSX, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines).
  • TIG welded using 1/4" cold rolled USA Steel, proven design for strength and reliability.
  • Easy to install - ls engine tools just bolts in place of your starter and locks securely into the flywheel teeth.
  • ls flywheel locking tool are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle.
  • Packing: 1PCS Engine Flywheel Locking Tool Comes with two proper length grade 8.8 bolts.
Check Stock

NMN Precision NON MDS Lifters Set 53021720AA 53021720AB Replacement for 2003-2018 Chrysler 300 Dodge Ram 1500 Charger Challenger Grand Cherokee 5.7L 6.1L 6.4L HEMI Replace# 5038784AD 5038686AA

  • Engine Valve Lifters Fit for 1999-2002 Camaro and Firebird.
  • 1999-2013 Silverado and Sierra (4.8L, 5.3L, 6.0L). Fits for LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines (4.8L, 5.3L, 5.7L, 6.0L, 6.2L).
  • Hydraulic tappet Replaces OEM #: 12595365 12499225 12551162 12569259.
  • Hydraulic tappet, also called valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal combustion engine. It helps get rid of the need for combustion engine to have mechanical clearance in the engine's valve train, to keep the valve from being held open and thus destroyed as the valve train goes through its process of thermal expansion. In effect, valve lifter keeps the valve healthy and protects from an engine's normal thermal expansion process.
  • A guide and anti-rotation device for the valve lifter comprises a vertically-disposed leg which seats in a slot formed on the valve lifter and a pair of cylindrically shaped arms, extending horizontally from opposite edges of the leg, which seat in a circumferential groove also formed on the valve lifter. A hook, connected to an uppe....
Check Stock

Full Engine Mount Adapter Plates Urethane Swap Kit Compatible with GMC Sonoma S15 Chevrolet Blazer S10 LSx LS1 LS2 LS- Conversion Motor Mounts+Frame Mount Adapter Plate

  • Full Engine Mount Adapter Plates Urethane Swap Kit Fit：1982-1990 GMC S15.
  • 1991-2004 GMC Sonoma(Compatible with 1983-2005 Chevrolet Blazer & S10 pickup 2WD 1983-2005 GMC Jimmy, S15 & Sonoma pickup 2WD)..Originally equipped with a 2.8l Chevrolet engine.see more detail in(Product description).
  • 1/4" laser cut steel multi position design for extreme durability..
  • Includes: (x8) flange head engine mount bolts,(x2)motor mount bolts, washers & Hex nuts ,(x2)1/4" laser cut motor mount adapter plates,(x2)2.8L Urethane Frame Mounts .As the picture shown..
  • Material：High quality steel constructions. Built to strict quality control standards. Instruction is not included..
  • Note: S10 LS Swap brackets allow installation of LS1 LS2 LS3 LS6 LSX LQ4 LQ9 4.8L 5.3L 6.0L 6.2L engine..
Check Stock

LS Oil Galley Diverter Restrictor Barbell Engine Block Plug Compatible with all GM Chevy 1997-2014 LS Series Engines LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 4.8L 5.3L 5.7L 6.0L 6.2L Vortec

  • Replace your old worn-out LS Oil Passage Diverter to prevent oil seepage or oil bypassing the oil filter. This is also a part that is overlooked when reassembling an engine which will cause little to no oil pressure resulting in engine failure..
  • Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
  • This installs in the oil galley hole behind the rear engine cover on the rear of the engine on the driver side. Non-O-ring end goes into block 1st. If you are not sure if your rebuilt or fresh rebuild with little or no oil pressure is missing this, you can remove the rear threaded oil galley plug above the oil filter location and see if you can see the shaft of this barbell through the hole. Comes with 1ea oil passage barbell..
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for you....
Check Stock

Improved Racing EGM-106 Low-Profile Oil Cooler Adapter for GM LS Engines, 10AN

  • 100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
  • Slim design provides maximum clearance for aftermarket headers.
  • Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
  • 6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
  • Made in USA. Lifetime manufacturer's warranty.
Check Stock

Brodix Cylinder Heads SH565-11/32P Replacement Valve Guide

  • FITS: 97-17 Chevrolet, GMC, Isuzu 3.5L-7.0L V8, V6 OHV Naturally Aspirated, Supercharged -,L96,L99,L76,L20,L92,LMF,LC9,LMG,LFA,LS9,LH8,LS4,LH6,L59,L33,LM4,LM7.
  • FITMENT NOTES: 8.1mm I.D., 12.7mm O.D., 53.8mm O.A.L., Intake and Exhaust, LS7, 8.1mm I.D., LY2, LR4.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

DNA Motoring GKT-A-2-DP-DNT-GPT-KIT Graphite Aluminum Gasket Plus Donut Studs Bolts Kit,Metallic

  • 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect.
  • Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory....
  • Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014.
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ...446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

Valve Spring Compressor Tool Compatible with LS1 LS2 LS3 LS6 LSX LQ4 LQ9 4.8 5.3 5.7 6.0 6.2 Universal Fit for LS Engine Vehicle (Aluminum Alloy + Stainless Steel) Upgrade

  • New Upgrade Groove+High Nut and Screw, prevent the machine from sliding. Aluminum alloy + Stainless Steel Material, Strong Thickness. NO rust at all..
  • This Valve Spring Compressor tool Universal Fit For LS engine vehicle. Fits for Any vehicle with LS Engine (LS1 LS2 LS3 LS6 LSX LQ4 LQ9 ) 4.8L/ 5.3L/ 5.7L/ 6.0L/ 6.2L..
  • A good tool to remove LS Valve Spring, save your time and power. Add lubricant will work better..
  • Brand new kit, Design as needed, Sturdy and Light, Direct replacement..
  • Package:1 X Valve Spring Compressor Tool with 6 pieces. This is an Upgraded and Improved product. Any more questions, please contact the seller for help. Thanks!.
Check Stock

Billet Black Aluminum Valve Cover Oil Cap w/-10 AN Fitting for LS LSX LS1 LS2 LS3 LS6 LS7

  • Our auction is for LS1/LS6/LS2/LS3/LS7 Billet Black Valve Cover Oil Cap w/ -10 AN Fitting..
  • This valve cover adapter replaces the original oil fill tube on the factory valve cover..
  • It is CNC-machined from billet aluminum for precise fit then anodized black, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the adapter..
  • The top of the adapter is machined to accept a -10 AN hose end to facilitate the installation of a custom crank case evacuation system, PCV system, or for use with a vacuum pump..
  • Designed to fit nearly any LSX engine!It will protects your engine and lets it breathe freely..
Check Stock