Top Ls Exhaust Manifold Bolts Arp

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

LSX Header Bolts for LS1 LQ4 LQ9 LS9 4.8 5.3 6.0 6.2L Grade 10.9 Silverado Tahoe (Iron)

  • These bolts are made with hardened Grade 10.9 steel, and can withstand a minimum tensile strength of 150,000PSI..
  • Flange Bolts are identified by the built-in washer under the head that acts to distribute the clamping load over a greater area..
  • They are designed to provide the same holding power as if you were to use a washer..
  • These bolts are superior to original or OEM product, and are made to withstand high strength and extreme conditions, generally found in Motorsports!.
  • Fits: LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8 5.3 6.0 6.2L with OEM Exhaust Manifolds & Aftermarket Headers..
Check Stock

DNA Motoring GKT-A-2-DP-DNT-GPT-KIT Graphite Aluminum Gasket Plus Donut Studs Bolts Kit,Metallic

  • 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect.
  • Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory....
  • Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014.
Check Stock

OTC 6982PMC Professional Mechanics Collet Set for Removing Frozen or Correded Studs and Broken Bolts

  • OTC's Professional Mechanics Collet is designed to securely grasp broken studs with as little as 1/4 inch exposed, including corroded or frozen exhaust manifold studs.
  • Compact design lets this versatile tool get into tough to reach spots for extraction -in an around suspension and steering components, tight exhaust manifold clearances and more.
  • Designed to draw tight - within 1/16 inch of head surface to ensure a secure and stable attachment that greatly reduces tipping.
  • Kit includes 4 collets (6mm, 7mm, 8mm, 10mm) sized to fit common applications including exhaust manifold studs, broken head bolts, and other engine and chassis fasteners.
  • Durable blow-molded storage case keeps tools contained and organized so they are ready when you need them.
Check Stock

Remflex 2049 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Reflex's unique flexible graphite material has been proven for more than 30 years.
  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6 /6.0L- LS1, LS2 Vortec, 1-3/4" Round Port, For Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Mophorn Exhaust Header Set 1 5/8 Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion LS Swap Shorty Headers for Chevy LS1 LS2 LS3 LS6 LS7 SUV Camaro Firebird Truck

  • High-quality Stainless Steel: This exhaust header has premium quality, made of high-strength 304 stainless steel with reinforced interlocking braid....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. With mandrel-bent to maintain....
  • Precise Dimension: With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses....
  • Easy to Install & Use: Integrated hardware, gaskets, bolts, and fittings pipes into a powerful turbo exhaust piping system, the pipe kit shows a....
  • Direct Fitment: It is compatible with for the Chevrolet Camaro Fits Chevy LS1 LS2 LS3 LS6 LS7, adding instant horsepower to the engine, improving....
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock