Top Ls Manifold Clamps

POSENG LS LS1 LS2 LS6 Intake Manifold with 102mm Throttle Body Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • 1.APPLICATION: For Cathedral Port LS1/LS2/LS6 Heads (for LS 4 bolt intake with cable drive only, not for drive by wire).For Specific Model Compatibility, please check the model list in the description.
  • 2.COMPATIBLE WITH: 1997-2004 Chevrolet Corvette.
  • 1998-2002 Pontiac Firebird Formula, Trans AM.
  • 3.NOTE: This intake manifold works well with 102mm Throttle Body, it can also work with 92mm throttle body (May be loose)..
  • 4.ROBUST PERFORMANCE: Made of 3MM thickness T6061 Sheet Aluminum, stay stable as always..
  • 5.PACKAGE INCLUDES: Intake manifold without rear map sensor port, 92mm throttle body, throttle position sensor (tps), gaskets, hardware, fuel rails, fuel crossover line.Injector not included..
Check Stock

Turbo Kit T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0 99+

  • Chevy Silverado / GMC Sierra LS Single T4 6466 Turbo Kit.
  • Hi Flow T4 cast passenger and oversized cast driver side manifold.
  • T4 T70 Trim Turbocharger Cast Passenger T4 Manifold Cast Driver High Flow Manifold Stainless Steel Crossover Stainless Steel 3" Downpipe w/ turndown....
Check Stock

LS3 MAP Sensor Compatible for 2010-2013 Chevy Camaro SS Convertible 2008-2013 Corvette C6 6.2L V8 VIN: W 55573248 213-4681

  • LS3 MAP Manifold Absolute Pressure Sensor LS (1 Bar).
  • Replaces Part Number: 55573248, 213-4681, 0261230282, 0261230146, 12591290.
  • Located on the inatke port near the throttle body..
  • Compatible with LS3 Camaro SS 2010-2013, LS3 Corvette 2008-2013.
Check Stock

A-Team Performance - Fabricated Intake Manifold w/Drive By Wire 102mm EFI Throttle Body - Compatible with LS LSX LS1 LS2 LS6 Black

  • 102mm Black Intake Manifold with EFI Drive by Wire 0° Opening Throttle Body Complete with Gaskets, Hardware, Black Fuel Rails, & Fuel Crossover Line.
  • Compatible with Chevrolet Small Block V8 GEN. III/IV (LS-Based) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2).
  • Compatible With Cathedral Port LS LSX LS1 LS2 LS6 heads.
  • Hardware - 3mm (1/8") thick T6061 Sheet Aluminum construction.
  • Durability - The intake will not bend or flex With Boost Or Vacuum.
Check Stock

Motion Raceworks Vacuum Boost Reference Billet Aluminum Distribution Block

  • This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted LS engine..
  • The design allows the block to be mounted universally or off the upper two most holes on LS1 cylinder heads front or rear as well as on a firewall, or anywhere else. This manifold is CNC machined from 6061 aluminum and features 8 separate 1/8 NPT ports and 2 1/4" NPT ports (on each end) giving you many different options for line routing and enough spaces for all of your boost reference signals.
  • This works great for plumbing to your boost reference fuel pressure regulator, manifold pressure wastegates, blow off valve, map sensor, boost controller sensor and many other items. Comes with two stainless button head bolts with the correct length and thread to mount block to cylinder heads..
  • Comes complete with 4 1/8" port plugs and 1 1/4" port plug standard..
Check Stock

Kyostar 92mm Black Throttle Body GM Gen III Ls1 Ls2 Ls3 Ls6 Ls7 Sx Ls 4 CNC Bolt Cable

  • Fit Engine: LS Style 4 bolt Intake Manifold (eg LS2, LS3, LS7, LSX) with cable drive only.
  • Vehicle Tested. Perfect Drop-In Fit. Note:If you have any question about our product,please contact us right away..
Check Stock

Vortech 4GX218-150L V-3 Si-Trim EFI Truck LS-Engine Swap Supercharger Kit

  • For use with 1999-2013 GM Truck Front Engine Accessory Drive (Not....
  • Tuner Kit (Fuel & Tuning Components Not....
Check Stock

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ...)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver

  • Silver Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black

  • Black Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Check Stock

LKONWEE Throttle Body Adapter Compatible with LS3 4 Bolt Intake to LS1 3 Bolt TB DBW LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551567

  • This throttle body adapter will allow you to install a 3-bolt DBW LS throttle body onto a 4-bolt LS intake. For example, an LS2 or LS3 intake manifold..
  • Adapter has 75mm through hole, tapered to 102mm for the throttle body.
  • Package includes: Adapter plate, bolts, and gasket.
Check Stock