Top Lug Nut Adapter Washer

Trailer Hub Spindle Nut Washer Kit

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

Torque Multiplier Lug Nut Wrench - Cheater Wrench

  • Loosens and removes lug nuts from a truck, trailer, RV, bus, tractor or other heavy duty vehicle.
  • Largest and most heavy duty torque multiplier lug nut wrench available with 1:65 gear ratio and full lifetime tool warranty.
  • Includes four one inch drive deep impact sockets (41mm, 38mm, 33mm, SQ 21mm).
  • Includes one inch male to one inch female adapter for socket extension.
  • Retaining ball on output shaft keeps sockets secure.
Check Stock

Barafat 10inch Steel Weed Eater Trimmer Head, Upgraded Wire Rotary Brush Weed Blade Cutter with Universal Adapter Kit Compatible with Stihl Husqvarna Ryobi Gardening Lawnmower Moss Grass Rust Removal

  • ...he market, our wired trimmer blade upgrades the length to 10 inch. When working, the contact area of twisted wires is larger, which can shorten the working time by 50%~80%! Improve work efficiency and reduce the risk of overloading the trimmer, which can greatly extend the life of the trimmer..
  • 【Two Pack Different Adapter Kits】 Blade adapter attachment maintenance washer First kit contains 1 x Thrust Washer/ 1 x Rider Plate/ 2 x different size Collar Nut/ 1 x Screwdriver/ 2pc x L-Wrench/ 1pc x T-Wrench/ 2pc x washer. The Second Kit: 1 x Thrust plate guard washer / 1 x Thrust washer/ 1 x Rider plate/ 1 x Lock nut/2 x washer. Two sets of accessories are one set for blade mower and one set for linear/Stihl mower..
  • 【Suit for Most Weed Trimmers】 10 inch weed brush steel wire wheel brush disc 25.4mm x 200mm trimmer head. This blade fits most gas and electric straight shaft trimmers with a 10-inch by 1-inch arbor. Compatible with Husqvarna, Stihl, Oregon, Ryobi and Hitachi..
  • 【Wide Application】 Perfect replacement for string trimmers, gardening Lawnmowers, and moss grass rust removal. It is applicable to various scenes such as gardens, courtyards, parking lots, lawns and sidewalks, especially grass in corners or brick joints. It can remove serious c....
Check Stock

NeJesZoe 8 Inch Steel Wire Brush Cutter Trimmer Head Sets Weeds Blade Cutter Replacement for String Trimmers Gardening Lawnmower Moss Grass Rust Removal 1 Brush&2 Pack Different Adapter Kits

  • ...ts are about 0.315inch and 0.3inch. Thrust Washer(10 teeth) and Thrust plate guard washer (6 teeth). Check your models before buy, make sure the brush fit your model. This weed trimmer brush head is made of high quality manganese steel. Cutting more evenly, weeding more thoroughly and quickly..
  • 【Two Pack Different Adapter Kits】Our weeding brush are delivered one 8"brush with two sets of installation adapter kits. Blade Adapter Attachment Kit: 1 x Thrust Washer(10 teeth)/ 1 x Rider Plate/ 1 x Collar Nut(0.315inch inside diameter)/ 1 x Screwdriver. Blade Adapter Kit: 1 x Thrust plate guard washer (6 teeth)/ 1 x Thrust washer/ 1 x Rider plate/ 1 x Lock nut(0.3inch inside diameter)..
  • 【Quick and Stable Weeding】The weed brush with twist knot wire and internal holding plate to ensure stability and safety. it is a practical spare part of the trimmer. Very suitable for cutting thick grass, tall grass, nettles, thorns, bushes, saplings, etc. Especially grass in corner or brick gap, remove heavy corrosion, rust, paint, spatter and scale removal while also clean weld edges..
  • 【Wide Range of Suitable Applications】This trimmer brush head has a 1-inch(25.4mm) hole in the center, which is suitable for most straight shaft gas trimmer with 1 inch(25.4mm) gear ....
Check Stock

NEIKO 02457A Lug Nut Key Set | 16 Pcs Locking Lug Nut Master Key Set, Thin Wall Spline Lug Nut Socket, Wheel Lock Removal Tool Kit for Aftermarket and Factory Wheels Tire Key | SAE & Metric Lug Socket

  • UNIVERSAL LUG NUT SET: This universal master wheel locking key set comes with 16 different keys to fit a wide variety of stock and after-market wheel lock nuts. Specifically designed to easily remove locking lug nut sets..
  • SECURITY LUG NUT: Heavy duty extra long lug keys with thin wall made of heat treated Chrome Molly Steel and a black oxide finish to ensure longevity, durability, and prevent nicks and scratches while removing your wheels and tires..
  • THIN LUG NUT SET: Thin and extra-long lug nut keys allows perfect fitment while protecting your tuner wheels. This locking wheel nut master key set comes with standard (SAE) and metric (MM) pieces that can be used on spline, star, hex, and fluted hex fasteners..
  • Double Hex Drive: Wheel lock key set with double hex head drive design fits most lug nut wrenches as well as 13/16" and 7/8" (19, 22mm) for a quick and convenient switching between sockets for all mechanics. Laser etched for quick and easy readability..
  • INCLUDES: 8 Spline Sizes (12 spline 13/16, 12 spline 11/16, 7 spline ¾, 7 spline 5/8, 7 spline 11/16, 6 spline 41/64, 6 spline 45/64, 5 spline 5/8) | 4 Star Lug (10-point ½, 8 point 5/8, 8 point 7/16, 9 point ½) | 4 High Tech Hex Lug (15mm, 9/16, 12mm, Fluted 12mm).
Check Stock

Southwest Wheel R30484X 84 Spindle & 5-5\ Bolt Circle Trailer Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

M12 x 1.5 Close End 20-Piece Aluminum Alloy Wheel Lug Nuts + Deep Drive Extension (Pink)

  • ▶️ Aircraft Grade Aluminum Construction.
  • Weighs Approximately 25 Grams Each Lug Nut.
  • ▶️ Comes as a Set of 20 Lug Nuts & 1 Deep Drive Extension Adapter.
Check Stock

Twist Socket Set 5 Piece Includes 1/2” Inch Lug Nut Remover 17mm 19mm 21mm 22mm Sockets

  • The Shankly lug nut separator tool extracts locking lug nuts by using a sharp biting twist socket design.
  • Lug nut remover kit includes 17mm, 19mm, 21mm, 22mm sockets.
  • Lug nut extractor kit is compatible with both impact and socket tools.
  • Bolt extractor socket set includes molded case and breaker bar to remove damaged lug nut from socket.
  • Shankly auto tools is invested in your satisfaction. If you find yourself unsatisfied, for what ever reason, we will refund or replace tools for up to....
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

7 Point Spline Drive Tuner Socket Key Tool for Seven-Spline Wheel Lock Lug Nuts - 20mm Inner Diameter - Compatible with 19mm (3/4) and 21mm (13/16) Hex Socket - Pack of 2

  • 2pc 7 Spline Lug Nut Socket Key Replacement. Compatible with 7-sided Spline Type Tuner Locking Lug Nuts. Typically 14x1.5, 14x2, 9/16x18, 1/2"x20 Threads. Works with Multiple Hex Socket Sizes: 19mm, 3/4", 21mm, 13/16"..
  • [Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more force than the torque needed to secure the nuts on your vehicle..
  • [Verify Nut Diameter] There are different diameter spline lug nuts on the market. Ensure that the diameter of your 7-Spline lug nut is smaller than 20mm..
  • [Verify Spline Count] Please double check your lug nut before purchasing. This only works for lug nuts with 7 splines/grooves, as there are multiple spline types on the market..
  • [Verify Nut Length] This will not work for lug nuts longer/taller than 2.25"..
Check Stock

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub

  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
  • Spindle includes spindle nut, spindle washer, and cotter pin..
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check Stock

M12x1.5 Lug Nuts with Mag Seat, 13/16' 21mm Hex 1.46x1.18 in. Blackened Wheel Lug Nuts Compatible with Toyota Lexus Scion Isuzu, Set of 24

  • 12x1.5 Lug Nuts --- 24pcs 12mm wheel lug nuts featuring 12x1.5 thread pitch, 21mm (13/16") hex size, OEM mag seat with washer, 1.5" overall length and 1.18" overall width, will fits most Toyota Lexus Scion Isuzu factory wheels.
  • Toyota Lug Nuts --- M12x1.5 OEM Mag Seat Style Lug Nuts w/ Washer fits Most 5 or 6 Lugs Toyota Factory Wheels (Exc. Land Cruiser, Tundra and Sequoia Models), Compatible with Toyota Camry, RAV4, Highlander, Corolla, Tacoma, 4Runner, Prius, Sienna & More - WARNING: UNFIT Land-Cruiser, Tundra and Sequoia.
  • Lexus Lug Nuts --- 12mm x 1.5 OEM Mag Seat Style Lug Nuts w/ Washer fits Most 5 or 6 Lugs Lexus Factory Wheels (Except LS460, 460h, 600H, LX470, LX570 Models), Such as: Lexus RX, NX, ES, GX, IS, GS, LX, RC, LS, LC, CT, LFA - WARNING: UNFIT LS460, 460h, 600H, LX470, LX570 Models.
  • Scion & Isuzu Lug Nuts --- 12mm x 1.5 OEM Mag Seat Style Lug Nuts w/ Washer fits Most 5 or 6 Lugs Scion and Isuzu Factory Wheels, Such as: Scion TC, XB, FRS and Isuzu Rodeo, Trooper, NPR, D-max.
  • Black Lug Nuts ----- Manufactured with cold forged and heat treated steel for dependable strength and durability, paint will not fall off easily.
Check Stock