Top Lug Trailer Hub Assembly

Southwest Wheel R30484X 84 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Round R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using 25580 inner and 15123 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs..
Check Stock

iBroPrat 2 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug

  • 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle..
  • 【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 32pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 2 DUST CAPS & 4 SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the imag....
Check Stock

Detroit Axle - 2WD Only 6-Lug Front Wheel Bearing Hub Assembly for - 2WD Only 2000-2006 Silverado 1500, Sierra 1500, Yukon No Denali or Z71 - Driver Passenger

  • Front Wheel Bearing Hub Assembly 6-lug 2-pc Set For 2WD/RWD Models Only! This Front End Service Kit Contains A Front Left Wheel Hub, Front Right Wheel Hub, And Front Wheel Bearings To Complete A Wheel Bearing Hub Assembly Front Kit. This Wheel Hub Kit Is Also Known As A Front Wheel Assembly, Wheel Hubs Assembly, Front Assembly, Front Hub Bearing Assembly, Left Front Hub Assembly, Wheelbearing And Hub Assembly, Wheel Hub Assemblies, Wheel Hub Front, And A Front Hub Bearing Assembly Pair..
  • Hub Specification: Lugs:6 | Flange Type: 3-Bolt Triangular | ABS Type: Sensor Wire.
  • Replacement Hub And Wheel Bearing Assembly For 2WD Chevrolet Silverado 1500 1999 2000 2001 2002 2003 2004 2005 2006 2007. Chevy Suburban 1500 2000 2001 2002 2003 2004 2005 2006. Chevrolet Tahoe 2000 2001 2002 2003 2004 2005 2006. The Parts In This Kit Are Direct Replacements For Chevy Silverado Wheel Bearing, Silverado Front Wheel Bearing, Silverado Wheel Hub, Tahoe Hub Assembly, Chevy Tahoe Wheel Bearing, Wheel Hub Assembly Silverado, Suburban Wheel Bearing, And A Chevy Tahoe Hub Assembly..
  • Replacement Wheel Hub And Bearing Assembly Front For 2WD Cadillac Escalade Esv Ext 2002 2003 2004 2005 2006. Gmc Savana 2500 2003 2004 2005. Gmc Sierra 1500 1999 2000 2001 2002 2003 2....
Check Stock

iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle

  • 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle..
  • 【WELL PACKING 】The parts are individually packed in bubble bags.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 16pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98'....
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings

  • Round R30484X 84 Spindle & 5-5" Bolt Circle Trailer Hub.
  • 5 studs 5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKSQ-220044) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub..
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs..
Check Stock

Phoenix GQST60-x1, Set of 4 - Stainless Steel Hubcap for 16", 8 Lug nut Trailer Wheels, Wheel Cover, Hub Cap for Trailers

  • Polished Stainless Steel Snap on Hub Cover.
  • Works on single wheel trailers with two wheels per axle.
Check Stock

Chrome 16\ Bolt on Hub Cap Wheel Covers for Dodge Grand Caravan - Set of 4

  • One (Single). Phoenix USA Brand DOT style bolt on wheel cover / simulator.
  • Kit includes part numbers PNST06SWL, PGDSF99MH4, CLPH2, PGD168LNT-x2, PGQST87SPA-x2, PN1850TSX-x2, PN1856TSX-x2.
  • Universal fit for 16" 8 lug trailer wheels with 8 lug nuts.
  • Polished Stainless Steel Snap on Hub Cover.
  • We list single wheel covers as replacements for lost or damaged wheel covers. This wheel cover is a replacement for wheel covers originally purchased in Phoenix NST06 or NST06AS sets..
Check Stock

Detroit Axle - Non-ABS Front Wheel Hub Bearing Assembly Replacement for 2002-2008 Dodge Ram 1500

  • Replacement for 2002-2008 Dodge Ram 1500 (5-Lug Models.
  • Kit Includes: 1x Front Wheel Hub and Bearing Assembly.
  • Hub Specification: Position: Front | ABS Type: Non-ABS | Lug: 5 | Flange: 3-Bolt Triangular.
  • Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
  • 10-Year Warranty. Detroit Axle Is a Leading Global Retailer and Distributor of OE Re-manufactured and New Aftermarket Auto Parts.
Check Stock

OEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs

  • Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
  • Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
  • If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
  • Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
  • A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.
Check Stock