Top M12 X 1 5 Thread Repair Kit

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires,Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

10Pcs M12 to M8 Thread Reducer Nuts, Stainless Steel Repair Sleeve M8 Female Thread M12 Male Thread Conversion Kit Suitable for for Plumbing Connections Compressed Air Hydraulic Automobile

  • Made of 303 Stainless Steel: The reducer nut is made of durable 303 stainless steel, which is resistant to high temperature, strong and wear-resistant.
  • Wide Range of Uses: Repair nut is an industrial fastening part, mostly used in conjunction with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, a repair nut can be used to effectively repair the threaded hole.
  • Recommendations for Use: If the M8 thread is very slippery, if you want to continue to use the M8 thread after the repair, use this method to expand the M8 thread to M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because this reduces the diameter The material is stainless steel, which will make the M8 thread stronge.
  • Wide Range of Applications: These repair nuts are widely used in aviation, automobiles, electronic communications, computers, molds, mechanical equipment and other manufacturing fields.
  • Thread Size Standard: Internal thread M8 x 1.25.
  • length: about 18 mm/0.7 inches. The thread is clear, and the thread sliding tooth restoration is more accurate.
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

Aramox Tap Tool,2Pcs Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5

  • 100% brand new and high quality spark plug thread insert tap repair tools.
  • With the size of M10 * 1.0 / M12 * 1.25, M14 * 1.5 / M18 * 1.5.
  • A nice tool kit for repair damaged spark plug installing threads.
  • Made of hardened carbon steel, these accessories are of strong strength and long durability.
  • Easy to use and operate. Come and have a try.
Check Stock

ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes

  • [Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
  • 131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
  • [Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
  • Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
  • [Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
  • Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
  • [Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
  • Inserts are heat-treated for long-lasting strength.
  • [Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Check Stock

Thread Checker Lug Nut & Wheel Stud SWTC-LN8 Bundle with a Lumintrail Keychain Light

  • Lug Nut Thread Checker - Each size has a lug nut and wheel stud checker on the same gauge. Thread sizes are permanently stamped onto each gauge..
  • Wire Cable Thread Checker - The individual gauges rotate freely on the wire cable for fast thread verification..
  • Durable Tools - Built to last & manufactured from high grade aluminum..
  • The Lug Nut Thread Checker is an accurate and easy-to-use thread identifier for both lug nuts and wheel studs. Each individual gauge features a male threaded stud on one end to measure lug nut threads and a female threaded hole on the other to measure wheel stud threads..
  • Thread Gauge Size Specifications by Color: M14 x 2.00 - Gold.
  • 1/2-20 - Black. Bundle with a Lumintrail Keychain Light.
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M8x80mm 6pcs

  • Package Content: 4pcs x Car Repair Expansion Bolt.
  • Thread Size: M12 x 32mm/0.47" x 1.3"(D*L).
  • Flat Washer Size: 24 x 2mm/0.94" x 0.08"(D*T).
Check Stock

HIlti 26472 Threaded Stud W10-30-27 P10 Direct Fastening

  • Package Content: 4pcs x Car Repair Expansion Bolt.
  • Flat Washer Size: 24 x 2mm/0.94" x 0.08"(D*T).
Check Stock

OVLORT Upholstery Repair Kit 29-Pack, Leather Craft Tool Kit Leather Hand Sewing Needles Canvas Thread and Needles Tape Measure Large-Eye Stitching Needles for Leather Repair

  • 【29 Pcs REPAIR KIT INCLUDES】9 x Leather stitching needles, 8 x Upholstery thread cord, 7 x Leather sewing needles, 1 x Stitching awl, 1 x Thread unpicker , 1 x Measuring tape, 1 x Sewing thimble, 1 x Yarn scissors. Rich mix to meet your different needs..
  • 【Wide Range of Uses】Our 29 Pcs Upholstery Repair Kit for car seat, sofa, umbrella, carpets, upholstery, coats, tents, mattresses, furs. You can sew different leather, fabric, denim, canvas or tarpaulin..
  • 【Upholstery thread cord】Our Repair Kit include 8 rolls leather threads in different colors to meet your needs in different projects..
  • 【Various Sewing Leather Needles】Our leather tool kit Come in a variety of sizes and shapes needles, includ blunted and sharp needles , triangle pointed needle and curved needle etc. The needles are sturdy and sharp..
  • 【Easy To Use】Whether you're a professional or a beginner, you'll find this Repair Kit convenient and user-friendly. Especially for DIY hand stitching lover..
Check Stock

Spark Plug Repair Kit, 16Pcs Carbon Steel Spark Plug Tap Thread Repair Tools M14 X 1.25 Rethreading Set with Portable Case Suitable for All Kinds of Product that Require High Thread Strength

  • Main Function : The spark plug repair tools can be used to quickly and efficiently repair damaged spark plug threads..
  • Wide Range Application : Our spark plug thread kit is suitable for all kinds of products that require high thread strength..
  • Fully Equipped : This spark plug tap thread is mainly used for clean and rethread spark plug port, which is a complete kit for meeting different needs. 5 x 11mm tap inserts black finish. 5 x 18mm tap inserts black finish. 5 x 18mm tap inserts yellow finish..
  • with a Storage Case : This spark plug tap thread comes with a plastic box is provided for convenient storage and carrying. It can also save room for you and easy to find..
  • Easy Installation : The spark plug thread repair kit is convenient to install, high strength, long service life..
Check Stock

46 Pcs Leather Sewing Kit, Upholstery Repair Set, Leather Craft Tools, Upholstery Carpet Leather Canvas DIY Sewing Accessories, Suitable for Beginners and Professionals Leather Craft

  • Rich Upholstery Repair Kit: You will receive 20 x leather stitching needles, 10 x upholstery thread cord, 6 x leather waxed thread cord,1 x needle bottle, 1 x threader, 2 x thread unpicker (one big and one small), 1 x stitching awl, 1 x center hole awl, 1 x hook head awl, 1 x measuring tape, 1 x sewing thimble, 1 x yarn scissors. The rich combination can meet your different needs..
  • Various Types of Needles: Our leather tool kits come with a variety of needles, including blunt and pointed needles of different lengths, triangular-pointed and curved needles, and more. The needles are sharp and high quality- do not bend or warp when out through very thick fabric. Different thickness, different size, more widely used, perfect for leather repair or other projects..
  • Practical Leather Sewing Thread and Wax Thread: This interior repair kit includes 9 different colors of decorative thread and 6 rolls of different colored wax thread, decorative thread in black, lake blue, natural white, dark brown, camel, light coffee, Gray, light gray and off-white, wax line is natural color, dark brown, dark gray, khaki, black, coffee. A variety of colors are used to match different leather and fabric colors to suit your needs..
  • Wide Application:Our 46-piece leather sewing t....
Check Stock