Top M35080 Eeprom

KeeYees SOP8 SOIC8 Test Clip and CH341A USB Programmer Flash for Most of 24 25 Series EEPROM BIOS Chip with PDF Tutorial

  • The SOP8 clip enables in-circuit programming of EEPROM without disassembling the chip, making flashing the BIOS simpler and more efficient..
  • The main purpose of the CH341A Programmer is to back up, erase, program, calibrate and other actions on various software..
  • The CH341A programmer supports most of the 24/25 series EEPROM SOP8 chips on the market, but not all of them. Please be sure to check whether your chip model is within the compatible range in the product description before purchasing..
  • The SOP8 clip support both wide body and narrow body SOP8 chip with 1.27MM Pitch..
  • We provide detailed PDF tutorials, CH341A software, and drivers, which will be sent to you by email after the order. If you do not receive it, please send us a message..
Check Stock

EZP2019 High Speed USB SPI Programmer with 4 Tested Base Support for Block 24 EEPROM, for 25 Flash 93 EEPROM, etc.

  • 【Portable Programmer】The appearance is small size, easy to carry, and the caliper is normal. Automatic offline copy, support for PC software and firmware updates for programming devices. Utra useful programmer, full support for Block 24 EEPROM, for 25 flash 93 EEPROM, etc.
  • 【High Speed Programmer】USB 2.0 interface, speed up to 12 MBPS. The reading and writing speed is extremely fast, the speed for Lee EN25T80 is less than 3 seconds long and writes EN25T80 in only 9 seconds.
  • 【Automatic Identification】 It is the fastest for BIOS chip programmer on the market.The chip is automatically identified and detected, and the chip supply voltage is automatically selected.
  • 【Wide Application】The high speed USB SPI programmer is suitable for flashing color TVs, DVDs, computer motherboards, hard disk storage chips in the home appliance repair industry.
  • 【After-Sales Guarantee】If you have any quesion about the programmer, please contact us. Our professional and reliable customer service will do our best and provide you with satisfactory solutions within 24 hours.
Check Stock

DTECH FTDI USB to TTL Serial 5V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 10 8 7 Linux MAC OS 6ft Black

  • 6 ft FT232 USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header 5V TTL to USB converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 11 10 8 7 Linux 6ft Black

  • 6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip Windows 11 10 8 7 Linux MAC OS 6ft Black

  • 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM.
  • 3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

DTECH USB to TTL Serial 3.3V Adapter Cable TX RX Signal 4 Pin 0.1 inch Pitch Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista (6ft, Black)

  • 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
  • A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND.
  • PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE.
  • ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

Adafruit Ultimate GPS Logger Shield - Includes GPS Module

  • Easy-to-sew or solder pads for embedding in your wearable project.
  • Low cost enough, you can use one for every weekend project.
  • Ultra low power, draws only 9 mA while running.
  • ATtiny85 on-board, 8K of flash, 512 byte of SRAM, 512 bytes of EEPROM.
Check Stock

Teensy LC USB Development Board Without Pins

  • 32 bit ARM Cortex-M0+ 48 MHz CPU 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM.
  • 13 High Resolution Analog Inputs 27 Digital I/O Pins (NOT 5V Tolerant).
  • 10 PWM outputs 7 Timers for intervals/delays, separate from PWM.
  • 3 UARTs (serial ports) SPI, I2C, & I2S I2S (for high quality audio interface).
  • 4 Lightweight DMA channels Touch Sensor Inputs.
Check Stock

Emergency Wall Telephone Pre-programmed to Auto Dial 911 - RED

  • Auto dials any pre-programmed telephone number (911 as default).
  • Works on any analog phone line (PSTN, VOIP) that is FSK or DTMF compatible.
  • Retains programming even if disconnected from phoneline (EEPROM technology)..
  • Telephone line powered (no external power required)..
  • Easy to install and re-program (Comes with wallplate and do-it-yourself programming instructions).
Check Stock

Robox 3D Printer Dual Extruder High Definition

  • Headlock System: Allows quick change of print head.
  • Quick Fill Dual Nozzle Technology: Detailed perimeter nozzle (0.3mm).
  • Smart Reel System: Automatic material recognition.
  • wide range of materials and colors available.
  • Smart Extruder System: Supports single or dual extruders.
  • Fully automatic material loading/unloading.
  • Automaker Software: East to use interface.
Check Stock

DIYmall 6M GPS Module with EEPROM for MWC/AeroQuad with Antenna for Arduino Flight Control Aircraft

  • When you test the GPS module, pls kindly note that you need test it in outdoor wide plain place, not indoor..
  • The 6M GPS module with ceramic destined antenna, super signal,can be quickly positioned..
  • The 6M GPS module uses serial comms to the host. It is setup to use 9600baud by default..
  • LED signal indicator,With data backup battery..
  • EEPROM power down to save the configuration parameters data..
Check Stock