Top Machine Tool Sleeve

Arbor Mandrel Adaptor Motor Shaft Coupler Sleeve for Angle Grinder,Drill Converted into Cutting Machine Accessories

  • Angle grinder converted into cutting machine arbor mandrel adaptor accessories.
  • It is suitable for cutting disc, saw blade, polishing tool which inner diameter.
  • This sleeve, installed on the grinding mill can be sanding disc polishing grinding, can also be installed 16MM or 20MM aperture of the slice,....
  • Size: please check the detail illustration.
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

VEVOR 50FT x 1/2 Inch Electric Drain Auger 250W fit 2' to 4' Pipes Portable Sewer Snake Drill, with 2 Sets of Cutters and Foot Switch, Red

  • ...s, which can easily go through multiple crooked pipes to clear away the blockages. Moreover, you are allowed to change the cable movement’s direction to stretch it out or shrink it back just by turning the control handle..
  • Professional Tool for Drain Cleaning: Ideal for 1″-4″/25-100 mm pipe. This drain cleaner machine enjoys a good reputation for its robust performance. It is capable of carrying out heavy work and can clean long sections of sewers. Widely used in sinks, toilets, and floor drains. Once you own this machine, you can clean the pipes by yourself, rather than paying several hundred bucks to call in a plumber..
  • Air-Activated Foot Control: Motor Power: 250W.
  • Motor Speed: 1750 RPM. Equipped with an air-activated foot switch, this sewer machine helps you control the cable with fewer efforts, making the cleaning process cleaner and more effective. Unlike cleaning pipes with powder, our sewer snake does not harm the surroundings. Thus, it tends to be a perfect choice for long-term use..
  • Four Shapes of Cutters: Prepare to be dazzled by 4 different shapes of cutters: Arrow Cutter, Spade Cutter, C-Cutter, Boring Bulb Cutter. The quick-change design makes the cutters easily connected or disconnected. Multiple attachments contribute a lot to clea....
Check Stock

Womens Halter Tankini Tops Womens Dresses Casual Summer,Womens Tank Dress Spaghetti Strap Sleeveless Summer Beach Slip Sundress(E-Sky Blue,X-Large)

  • ...shoulder prom dress prom dress off the shoulder long loft off the shoulder dress purple lace off the shoulder dress shirred detail printed off the shoulder dress lavender off the shoulder dress wine off the shoulder maternity dress white v neck off the shoulder dress.
  • dot falbala fold slim fit pencil dress women 3/4 sleeve striped wear to work business cocktail pencil dress plus size bishop sleeve plunging v neck belted dress womens bell sleeve cocktail party pencil dress gathered short sleeve crew neck shift dress short sleeve casual work midi dress sleeveless dress plunging v neck bishop sleeve belted dress elegant.
  • swing dress dress shoe laces men casual black dress under dress for women under dress shorts women colorblock dress plus size red dress sleep dress casual dress dress summer dress with pockets dress baby girl christening dress womens dress shorts kids dress short summer dress gypsy dress black halter dress rose dress checkered dress non iron cap sleeve dress black and white striped dress white.
  • ღ【Search】 with designs with built in bra for boys with shelf bra for fish helium for s tees tees by tees for men teeshirts mens golf tees diaper bag topsy tail hair tool topsy tail hair tool for kids topsy tail hair tool maker ponytail holder ....
Check Stock

Strike Indicator.com Combo Pack Deluxe

  • ...r wool yarn. Use Neon Lemon - in rough water - Pearly (Stealthy) White - looks like an air bubble, Bright Fluorescent Green - in low light conditions, Radioactive Orange when sighting is a challenge. Once you've trimmed your indicator - add a dab of fly floatant to the wool and it will float all day..
  • 200 PRECISION MACHINE CUT SLEEVES - In the highest quality Custom Vial for The New Zealand Strike Indicator System. These sleeves are precision cut to 4mm - and fit our regular size Indicator Tool with the Red handle. The Pre-Cut Sleeves and Vial comes with 200 Sleeves and a perfectly sized hole on the cap so you can easily load up your Strike Indicator Tool. When re-sleeving your indicator tool - take a bit of fly floatant and apply it to the tool. The sleeves will slide easily..
  • GUIDE TIPS - It's a pleasure to cast a light and natural wool indicator - it casts like a dry fly! Guides are making multicolor indicators to improve sighting and detection of the slightest take. Once you have selected the best color(s) for your indicator - go ahead and trim it to the perfect length. At the end of your day - be sure to save the sleeve and wool indicator for your next trip..
  • SCROLL DOWN - For More Comprehensive Product Information - Scroll down to the Product Des....
Check Stock

YANGCAN Lower Control Arm Prying Tool For Any 7/8' Diameter Pry Bar

  • ...Prying Tool is made of special steel, which can withstand huge pressure without deformation, eyelet end fits any 7/8" pry bar. The surface is coated with anti-oxidant coating to extend the service life。.
  • The characteristics of our tools: For this set of suspended special bushing tools, we added a protective rubber sleeve, because the cutting surface of any steel tool will not be very smooth. Adding a rubber sleeve can prevent you from scratching the vehicle during use and at the same time preventing you from cutting your body during the process of exerting force. You can use it with confidence..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Crimping Tool, Wire Rope Crimping Tool, Up To 2.2mm Swager Crimper Fishing Wire Crimping Tool with 100 PCS Aluminum Double Barrel Ferrule Crimping Loop Sleeves Kit with Cutting Function for Cable

  • 【Premium Quality】- The wire crimping tool was made of heavy-duty stainless steel, which is corrosion and rust resistance. 4 positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm, It can easily crimp copper/aluminum sleeve and more from 50-450 lb test line..
  • 【Special-Purpose】- Cable crimper tool With non-slip grips and self-locking. The safety lock is an easy way to keep your crimper closed when you don't use it. And the mechanism design makes it more relaxing to provide optimum pressure..
  • 【Wide Application】- Crimping tool kit comes with 2 hardened steel side cutters, which can help you cut the wire without frays and the strong spring opens the cutters instead by your hands. Coordinate with aluminum double-barrel ferrule crimping loop sleeve can be widely used for wire rope..
  • 【Package Included】- High precision wire rope crimping tool with a 100Pcs Aluminum double-barrel ferrule crimping loop sleeve kit..
  • 【Pay Attention to】- ❶ The crimping tool can only be crimped to aluminum sleeves of 3/32" and below. ❷ The cutting section can only cut wire ropes 1/16" and below..
Check Stock

MAOPINER Universal Electric Drill Press Stand Tool Drill Stand Bench Clamp Drill Press Stand for Hand Drill Workstation Repair Tool Clamp

  • Application: Use this drill press stand for electric drills with collar diameter 38-43mm (1.7"or 1.5"), with a black plastic ring for a better fix..
  • Material of this Electric Drill Press Stand: Aluminum alloy base + solid column bar.
  • Drill Depth: up to 60mm(2.4"), single hole mount..
  • This universal bench clamp support tool is designed for use with power drills with collar diameter of 38mm or 43mm, can drill depth up to 60mm, comes with 2 holes for mounting.
  • Designed with slots on the iron base for installing machine vise, make it more convenient to operate, ergonomic rubber handle of the workbench repaur tool clamp is anti-slip and easy to grab.
  • The package includes 1 x Base, 1 x Column bar, 1 x Rocker, 1 x Lower limit Fixed sleeve, 2 x Adjustable plastic fixed sleeves, 1 x Hex wrench 5mm.
Check Stock

Mophorn 100Ft x 3/8Inch Drain Cleaner Machine fit 1 Inch (25mm) to 4 Inch(100mm) Pipes 370W Drain Cleaning Machine Portable Electric Drain Auger with Cutters Drain Auger Cleaner Plumbing Tool

  • ...s, which can easily go through multiple crooked pipes to clear away the blockages. Moreover, you are allowed to change the cable movement’s direction to stretch it out or shrink it back just by turning the control handle..
  • Professional Tool for Drain Cleaning: Ideal for 1″-4″/25-100 mm pipe. This drain cleaner machine enjoys a good reputation for its robust performance. It is capable of carrying out heavy work and can clean long sections of sewers. Widely used in sinks, toilets, and floor drains. Once you own this machine, you can clean the pipes by yourself, rather than paying several hundred bucks to call in a plumber..
  • Air-Activated Foot Control: Motor Power: 370W.
  • Motor Speed: 1700 RPM. Equipped with an air-activated foot switch, this sewer machine helps you control the cable with fewer efforts, making the cleaning process cleaner and more effective. Unlike cleaning pipes with powder, our sewer snake does not harm the surroundings. Thus, it tends to be a perfect choice for long-term use..
  • Four Shapes of Cutters: Prepare to be dazzled by 4 different shapes of cutters: Arrow Cutter, Spade Cutter, C-Cutter, Boring Bulb Cutter. The quick-change design makes the cutters easily connected or disconnected. Multiple attachments contribute a lot to clea....
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

  • Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
  • Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
  • Fit for the newest Cummins seal and sleeve perfectly.
  • Remove and install front crankshaft seal easily and without damage.
  • Made of high quality steel and black finish.
Check Stock