Top Machined Pulleys

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
  • [ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Bapmic Mechatronics Sealing Sleeve and Double D Gasket Compatible with BMW E60 E65 E66 E70 E71 E90 335i

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

X AUTOHAUX Vehicle Crankshaft Pulley Long Water Pump Triple Groove Crank Pulley for Chevy SBC 350 Engine

  • CNC machined from solid billet aluminum, rather than the typical cast units.
  • Helps your engine rev much faster because these pulleys have an extremely low rotating mass while significantly increasing throttle response and freeing up lost HP and TQ.
  • Engineered to outperform and outlast the competition.
Check Stock

Newsfana Aluminum spacers Skates 8-Pack Spacers for 6mm Axles Spacers (Silver)

  • Inline Skate Bearing Spacers Material: Aluminum alloy, galvanized speed ring iron is specially molded into a dragon size.The gaskets are machined from high quality aluminum and meet specific standards. Aluminum Spacers This minimizes resistance to the bearings, and the sturdy aluminum construction eliminates the head and is more durable than other plastics! Skate bearing High quality, guaranteed service life!.
  • Aluminum Spacers This stepped gasket is suitable for conventional: Inline Aluminum Spacer aluminum shaft outer diameter: 7.9 mm inner diameter: 6.3 mm length: 23.5MM Size: 6.3MM X 7.9MM X 23.5MM. The bearing is located in the recessed part of the gasket and is provided with the wheel. Stepped Spacer Seamless integration. ( Package: 8 pack ).
  • Bearing Skate accessories Suitable for all standard size wheels, standard size 8mm bearings and standard size 6mm axles for standard size wheels and bearings. 6mm Axle Aluminum This minimizes resistance to bearings. The robust aluminum construction eliminates head and ratio Other plastics are more durable. Skate Wheel Bearing Installation: Place one bearing in the wheel. Install the gasket into the bearing in the wheel and insert the other bearing into the other side of the wheel..
Check Stock

The Hillman Group 45198 1/2-Inch Stainless Steel External Retaining Ring, 12-Pack

  • Set Includes: 11 Sizes(Metric): 25mm, 28mm, 30mm, 32mm, 34mm, 35mm, 38mm, 40mm, 42mm, 45mm, 47mm.Totally: 88Pcs..
  • Material: Made of Carbon steel, Surface treatment: Blackening. providing good resistance to corrosion and high temperature..
  • Features: The spring metal clip features 3 prongs that give it an E shape which fits in a groove on the metal shaft assembly..
  • Application: These E-Clips are retaining rings that fit into a machined groove of a shaft to secure items..
  • Application: E-Clip Circlip uses for appliance repairs, bearing, gears, pulleys, and various repair projects..
Check Stock

Small Block Chevy Serpentine System for 283 302 305 350 400 Engines- Power Steering and Alternator

  • Black Anodized Billet Aluminum Pulleys and Brackets CNC machined in the USA backed by our industry leading lifetime warranty!.
  • Works on 283 302 305 327 350 400 Engines With Long Water Pump.
  • Requires a Saginaw Power Steering Pump with Keyway Shaft and GM Alternator.
  • Kit Includes water pump pulley, alternator bracket, alternator fan, alternator pulley and cap, crank pulley, and power steering bracket with pulley. Alternator, Water Pump, and Power Steering Pump NOT included.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Check Stock

BEMONOC 2GT Timing Pulley 20 Teeth 6mm Bore fit GT2 Belt Width 6mm and 3D Printer Parts

  • ✔Two Screws Are Provided For Each Timing Pulley and Already Have Been Screwed in the Pulley.
  • ✔Adopt High Quality Aluminum, Excellently Machined, Finished Smoothly.
  • ✔Package Listing Includes: 5pcs × 2GT 20T Bore 6mm Timing Pulley + 1 x Allen Key + 10pcs × Screws..
  • Perfect Choice for Building a Reprap 3D Printer Prusa Mendel CNC or Similar Projects.
Check Stock

uxcell 19.5mm External Circlips C-Clip Retaining Shaft Snap Rings 304 Stainless Steel 50pcs

  • This External Retaining Ring is used to secure parts on shafts into a machined groove. It features durable steel construction for long-lasting use. Install with pliers..
  • External circlip use for appliance repairs, bearing, gears, pulleys, and various repair projects..
  • Stainless Steel is Superior to Regular Steel and Provides Excellent Rust Resistance in Water Applications, Suitable for Indoor and Outdoor Use..
Check Stock

Dual-Purpose Compound Bow Hunting Catapult Bow for Steel Ball Arrow, Draw Weight 30-60lbs Adjustable, Gordon Limbs Made in USA ,Short-Axis Compound Bow,Left/Right Hand Avalible (Bow Set)

  • 【Parament】Draw weight: 30-60lbs adjustable.
  • Draw length: 25”-30” Continuously Adjustable.
  • Initial speed of shooting steel ball: 115meter/second (12mm steel ball).
  • 【Dual-Purpose Compound Bow】It’s the kind of dual-use compound bow, can be used to shoot steel balls and arrows for outdoor hunting, target shooting and bow fishing..
  • 【CNC Machined Aviation Aluminum Alloy Body and USA Made Gordon Limb】This Compound Bow main body is CNC machined aluminum.
  • Bow limbs adopts USA made Gordon bow limb, The pulleys are aviation aluminum alloy, CNC integrated cams. High performance and dural for use..
  • 【Right/Left Handed Available】This Compound bow fit for the Right and Left Handed Shooter. It is recommend to use ID 12mm steel ball..
  • 【WARM NOTICE】: Please read the manual carefully before shooting. DO NOT DRY FIRE (shoot without an arrow)! This will damage the bow and hurt yourself and the people around you..
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

JRC Components Ceramic Derailleur Pulley Wheel for SRAM Eagle | Pair of 14&12T Jockey Wheels Ceramic Bearing - Road Bike Rear Derailleur Pulley Wheels | Ceramic Speed Pulley Wheels - Black

  • JRC Components Ceramic Pulley Wheels are compatible with all SRAM Eagle Systems. Narrow-Wide Ceramic 12 + 14tooth Jockey Wheels are crafted from billet aluminium, CNC machined and finally anodised before having hybrid ceramic bearings installed..
  • Hybrid Ceramic bearings to lessen friction and packed with grease for flawless use all year round!.
  • *Please note these pulleys are made with SRAM Eagle groupsets in mind*.
Check Stock