Top Machining Collets Manufacturers

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

Grizzly Industrial T28780 - Router Table with Lift

  • Complete Control: This powerful soft start 3.25 horsepower motor with easy to adjust variable speed dial ensures you have complete control while....
  • Powerful performance: Electronic speed control of the motor provides the power to maintain constant speed under load and ensure perfect results when....
  • Smooth routing: 15 AMP motor offers 10,000 to 22,000 RPM for smooth routing every time.
  • Industrial Grade: Included with the motor are two precision ER20 collets (1/4" and 1/2") for secure, accurate routing. These collets have holding....
  • A great addition to the workshop: With a 4.2-inch diameter, this motor is easy to use and compatible with most router lifts and tables.
Check Stock

BTSHUB Pipe Stretcher Kit, 28mm Exhaust Pipe Expander Stretcher Tool Set, 1-5/8 to 4-1/4 Inches, Expander Tool for Tail Pipe Tube

  • [Increase Engine RPM]: Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
  • The Exhaust Hanger Tool easily expands pipes with ease,.
  • [Professional tools] The pipe stretcher kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
  • Perfect for home DIY or professional auto shops..
  • [Easy to Use]: Simply lubricate all parts of the exhaust expander tool, attach sleeves as needed, insert pipe spreader into the pipe, connect to existing drill, and expand away.
  • Pipe might need to be warmed during winter months to prevent damage while using tube expander. Use a 1/2" or 3/4" impact wrench to save even more effort..
  • [Wide Application ]: Tailpipe expander kit great for all types of pipes, from aluminum to stainless steel.
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4"..
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Bearing Removal Tool Set 16 Pieces

  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

Frankford Arsenal Quick-N-EZ Impact Bullet Puller - Stuck Case Remover for Ammo Reloading with Interchangeable Collets

  • VERSATILITY: 3 different sized collets included allows you to pull bullets from almost any caliber from .22 Hornet to 45-70, rimmed or rimless.
  • EASE OF USE: Works with one stern "whack" to separate bullet from brass.
  • DURABLE: Constructed of lightweight aluminum and heavy-duty plastic.
  • INCLUDES: 1 hammer, 3 collets and 4 o-rings.
Check Stock

LOTOS TECHNOLOGY TA01 Accessories and Consumables Kit for Welders TIG200, CT520D, LTPDC2000D (Pack of 9)

  • This tig accessories kit is for lotos tig welders and combo machines with tig function.
  • It includes 3 pcs of nozzles, 3 collets and 1 collet body.
  • The sizes of 3 collets: 1.6Mm, 2.0Mm, 2.4Mm.
  • This item can be only used for LOTOS TIG welder TIG200, combo machines CT520D and LTPDC2000D.
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set 16PCS

  • 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

TEMO 10 pc Durable Shiny 1/8 Inch Rotary Tool Collet Bit #480 Compatible for Dremel Rotary Tools

  • 10 pieces durable shiny Collet bits # 480 for 1/8”(3.175mm) diameter bits..
  • Compatible for Dremel except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models 260, 270 and 280. It also fit many other....
  • Collets are Compatible for Dremel 225 and compatible Flex-Shaft attachment. |.
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

MINIQ Bench Drill Stand 710W Mini Electric Bench Drilling Machine Drill Chuck 1-13mm

  • Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling..
  • Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool..
  • This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts..
  • Infinite speed selection within the machine's six speed ranges(0-2800r/min)..
  • Duty cast iron base: Heavy base weight and the three-hole screw positioning can reduce noise, and make the work more stable without vibration and movement..
Check Stock

LainKeen Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4", Exhaust Pipe Expander Stretcher Tool Set, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic....
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock