Top Machining Shaft

Vbest life Tru-Spin Prop Support Balancer for Multirotor Airplane RC Helicopter Black (Black)

  • High-quality Hardened Material: The tru-spin prop balancer is made of high-quality hardened material,more durable..
  • Wide Range of Uses: Balance various sizes and weights of aviation props, nautical props, helicopter rotor heads, trimmers, wheels, jet fans, flywheels, etc..
  • Accuracy:Safely center, lock the props on the balancing shaft ,high accuracy..
  • Full Adjustable :Full adjustable pitch propeller balancer..
  • Perfect Balancing:With precision machining of rotating wheels ,perfect balancing is easy..
Check Stock

KESHES Archery Arrow Field Points Tips - Practice Target & Hunting Arrows Heads for Recurve, Compound Bow & Crossbow Bolts, Screw-in 100 Grain (24 Pack)

  • FEATURES O-Rings - The O-rings included in the Archery points Field pack, Ensures correct alignment of the point and arrow shaft.
  • Reduces the need to constantly re-tighten The field points..
  • TAPERED POINTS - Minimizes damage to bag and foam targets - Creates a hole slightly larger than the shaft size, so arrows can easily be removed from targets..
  • ARROW POINTS SCREW IN - With the Field tip being screw-in, it Makes replacing, swapping, and adjusting Archery field tips in and out easily!.
  • DETAILS & DIMENSIONS -Outside diameter is 7.6mm.
  • Inner diameter (screw part) is 6.2mm, each weighing 100 grain (please allow 1-2 range). Its processed stainless steel with Precision Machining, to get the perfect stability and give your arrows the perfect shot..
  • RISK FREE -If you’re not 100% satisfied with your purchase, you will be fully refunded, as at Keshes, we back our products 100% and Guarantee your full satisfaction..
Check Stock

KESHES Archery Arrow Field Points Tips - Practice Target & Hunting Arrows Heads for Recurve, Compound Bow & Crossbow Bolts, Screw-in 100 Grain (12 Pack)

  • FEATURES O-Rings - The O-rings included in the Archery points Field pack, Ensures correct alignment of the point and arrow shaft.
  • Reduces the need to constantly re-tighten The field points..
  • TAPERED POINTS - Minimizes damage to bag and foam targets - Creates a hole slightly larger than the shaft size, so arrows can easily be removed from targets..
  • ARROW POINTS SCREW IN - With the Field tip being screw-in, it Makes replacing, swapping, and adjusting Archery field tips in and out easily!.
  • DETAILS & DIMENSIONS -Outside diameter is 7.6mm.
  • Inner diameter (screw part) is 6.2mm, each weighing 100 grain (please allow 1-2 range). Its processed stainless steel with Precision Machining, to get the perfect stability and give your arrows the perfect shot..
  • RISK FREE -If you’re not 100% satisfied with your purchase, you will be fully refunded, as at Keshes, we back our products 100% and Guarantee your full satisfaction..
Check Stock

Jetech Strike Cap Go Through Screwdriver Slotted 5x100mm, S2 Steel Flat-Head Screwdriver with Striking Cap, Magnetic Tip, Ergonomic Soft Grip TPR Handle

  • DURABLE SHAFT - The S2 steel shaft is of great shock resistance. Overall heat treatment adds extra strength and durability to it. Its nickel and chrome plating brings rust and corrosion resistance..
  • GO-THRU STRIKING CAP - A steel core goes through the whole screwdriver, transferring the force from the striking cap to the tip while striking, which protects the tool and facilitates your work..
  • ERGONOMIC NON-SLIP TPR HANDLE - Made with quality thermoplastic rubber (TPR), the handle provides a secure and comfortable grip..
  • MAGNETIC TIP - A magnetic tip makes it more convenient for your work. It easily attracts and lifts the screws from confined areas, saving your time and improving your efficiency at work..
  • PRECISE FIT - Adopting precision machining, the flat blade provides an exact fit in fasteners. The 5x100mm slotted screwdriver from Jetech is designed for screws with a diameter of φ5mm..
Check Stock

24 Pieces Aluminum Dart Shafts Shafts for Darts Steel Tip Soft Tip Dart Accessories 1.97 Inches Hard Metal Dart Stems with Rubber O Rings Darts Sharpener for Sports Outdoor Dart Flight Black

  • Sturdy Material for Long Time Use: these aluminum dart shafts are made of quality aluminum, with precision machining process, not easy to break and....
  • Shaft Lock Hole Design for Safe Use: these dart shafts for steel tip are designed with lock hole, allowing you to fix the shaft to the dart barrel....
  • Portable Size for Easy Carry: these dart shafts are about 50 mm/ 1.97 inches in length in total, about 45 mm/ 1.77 inches without thread in length,....
  • Complete Accessories: the dart stems are equipped with rubber O rings, which can fix the dart rod firmly, making the flight path more stable and....
  • Sufficient Quantity: the package comes with 24 pieces of shafts for darts, equipped with 40 pieces of O rings, and 1 piece dart sharpener, enough....
Check Stock

Lovejoy Size D12B Universal Joint, 1\ Round Bore and 1\ Round Bore, 1/4\ x 1/8\ Keyways, 2.00\ Outer Diameter, 5.44\ Overall Length

  • Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 1,750 RPM.
  • Compensates for angular misalignments and shaft separation.
  • Bored hubs fit onto shafts without the need for machining.
  • Operating temperatures range from -30 to 212 degrees F.
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock

24 Pieces Aluminum Dart Shafts Dart Shafts for Steel Tip Soft Tip Dart Accessories 1.97 Inches Hard Metal Dart Stems with Rubber O Rings Darts Sharpener for Sports Outdoor Dart Flight (Black, Silver)

  • Sturdy Material for Long Time Use: these aluminum dart shafts are made of quality aluminum, with precision machining process, not easy to break and bend, lightweight and stable, sturdy and serviceable, nice to fit different kinds of darts, also very suitable for both steel tips or soft tips.
  • Shaft Lock Hole Design for Safe Use: these dart shafts for steel tip are designed with lock hole, allowing you to fix the shaft to the dart barrel with levers, without worrying about the shaft falling off during use, also making you safe in the process of use.
  • Portable Size for Easy Carry: these dart shafts are about 50 mm/ 1.97 inches in length in total, about 45 mm/ 1.77 inches without thread in length, lightweight and portable, easy to carry and store when you are not using them, without taking up much space.
  • Complete Accessories: the dart stems are equipped with rubber O rings, which can fix the dart rod firmly, making the flight path more stable and smooth.
  • And the round dart sharpener is nice to remove the metal burrs, making the tips round and keeping the darts pointed.
  • Sufficient Quantity: the package comes with 24 pieces of shafts for darts, equipped with 40 pieces of O rings, and 1 piece dart sharpener, enough quantity and complete combination can meet your....
Check Stock

Lovejoy Size D12B Universal Joint, 1\ Round Bore and 1\ Round Bore, 1/4\ x 1/8\ Keyway with Setscrew, 2.00\ Outer Diameter, 5.44\ Overall Length

  • Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 1,750 RPM.
  • Compensates for angular misalignments and shaft separation.
  • Bored hubs fit onto shafts without the need for machining.
  • Operating temperatures range from -30 to 212 degrees F.
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

gas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

  • ★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
  • Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
  • ★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
  • ★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
  • ★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock