Top Machinist Vise

JCL Vise Jaws - Nylon, Multipurpose 6' - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

ZOENHOU 10 Pairs 1/8 x 6 Inch Machinist Parallel Bars Tools Set, 10 Pair Steel Parallels Straightedge Bar Block with 2 Holes, Hardened Precision Machinist Tools 1/2 Inch to 1-5/8 Inch

  • PREMIUM MATERIAL - These machinist parallels are made of high-quality steel after hardening, stress relief, and fine grinding..
  • PARALLELS STRIGHTEDGE BAR BLOCK - The size and parallelism of the product provide the actual, reliable, and accurate position of the workpiece. 2 holes in each parallel bar. Increments in 1/8 inch from 1/2 inch to 1-5/8 inch..
  • PRODUCT PACKING - A pair of each height, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, and 1-5/8. Machinist parallel bars come individually wrapped (in pairs) and are pre-oiled for long-lasting life and rust-resistance (recommend reapplying oil after use)..
  • WIDE APPLICATION - The 20 pieces machinist parallels tools are used for any machining, leveling, and adjustment of milling and grinding machines, forming machines, planers, rigs..
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our 1/8 inch thick x 6 Inch machinist square parallel bars, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

Engineer Square Machinist Square Set Mechanical Steel High Precision Square Woodworking Wide Base Square Tool Wide Sitting Angle Square L-type Measuring Tool for Engineer Student (5 x 3.2 Inch)

  • Nice craftsmanship: our machinist square has bright surface color and smooth base surface, as well as quality material.
  • Without trace, it will let you have a nice and comfortable use experience.
  • Proper size:this machinist square rule is 5 inches in whole length, bottom length is 3.2 inches.
  • The proper size will ensure the accuracy of the measurement data, also allow you to hold the rule easily and firmly.
  • Safe and reliable: this precision square tool use rivet links design, so it will not endanger your safety.
  • Besides, its chassis is heavy, upright and stable, as well as not inclined, so the measurement data is more accurate and easy to read.
  • Nice work performance: the testing machinist square can be applied to various engineering measurements, it can accurately measure the vertical deviation of internal and external angles.
  • The accurate 90 degree angle has no difference, assuring the measurement data correct without error.
  • Easy to identify: machinist steel square is engraved with dimensions and clear numbers, so you can quickly identify the data, which ensures that you can easily measure each right angle.
Check Stock

Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool

  • Multipurpose Design: These soft vise jaws are the perfect tool to hold your workpiece firmly in place and protect it from your metal bench vise. Safely hold any round, flat or irregular metal, plastic or wood objects. Simply change between the grooved and flat vice jaw sets accordingly.
  • Compatibility: Our vise jaws are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work..
  • Grooved or Flat Surface: Our 4 inch vise soft jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
  • 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your tabl....
Check Stock

WeldingStop 6 in Machinist Ruler Scale 5R 10ths 1/100 1/32 1/64 Graduation Flexible Decimal Inch Steel Rule

  • This a 6 in machinist scale or 150mm length and 5R ruler rigid which is made by high quality Stainless Steel, it can be lightly flexible and thin.
  • 5R scale graduations have 10th and 100th on one side and quick-reading 32th and 64th machinist scale inch on the other side.
  • The sides of each machinist rule are ground parallel and each end is accurately ground square to allow reading from either end.
  • The ruler is 1/2'' or 12.5mm width, and 0.025'' or 0.6mm thickness. Both long edges are ground flat and straight.
  • All the scales are Laser Engraving, very clear and easy to read. This type of engraving can make the scale not easy to wear after long time using.
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....
Check Stock

Riverruns Fly Tying Vise

  • Aventik quality fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
  • This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
Check Stock

Rockler Quick Release Woodworking Vise Clamps for Woodworking (12”) – Heavy-Duty Bench Vise Woodworking – Quick Wood Vise for Workbench – Easy to Install Workbench Vise with Hardwood Handle

  • Quick Release Vise: Sturdy guide rods keep the clamp faces neatly parallel, while the quick-release feature lets you slide the woodworking vise all the way open with an easy 1/4 turn..
  • Unique Design: This unique end vise for the workbench ensures smooth & efficient operation making this woodworking vise the most versatile and frequently used tool in your workshop..
  • Includes Hardwood Handle: The extra-wide 12" O.C. Guide rods provide maximum resistance to racking, while the extra-wide 17-1/2" woodworking bench vise handle plate delivers maximum stability to handle any project..
  • Widely Applied: The woodworking quick vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. This woodwork vise can also be used as a front vise.
  • Easy To Install: Our woodworking vise is easy to install with included instructions. Before installing carefully read the woodworking vise quick release PDF. (mounting hardware not included).
Check Stock

Fowler 52-104-025-0 Machinist Screw Jack Set

  • Stability: The base of these machinist tools is 1.5” for added stability.
  • Durable: Consists of a heavy steel cast base with an adjustable steel screw and a tilting swivel head with a lock nut for permanent positioning.
  • Weight Capacity: The total weight capacity for the machinist jacks is 1000lbs.
  • Set Includes: Two machinists jacks along with a fitted case.
Check Stock

Rockler Quick Release Front Vise – 9” Woodworking Vise Dual Guide Rods Eliminate Racking – Easy to Operate Wood Vise for Home, Studios, Teaching Equipment - Bench Vise Woodworking

  • Woodworking Vise For Workbench: This powerful workbench wood vise is perfect for custom workbenches. Sturdy dual guide rods eliminate racking, while the quick-release feature lets you slide the vise all the way open or closed with an easy 1/4 turn..
  • Convenient Design: Slides open or closed in seconds! You can easily mount this workbench wood vise. The 9-inch guide bar's convenient design makes it easy to work and holds things more firmly..
  • Solid Construction: The woodwork vise has an iron and steel structure. The guide rods provide absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. This vise for woodworking also has a solid hardwood handle..
  • Easy To Use: Simply pull up on the handle and hold, this will cause the bench front vise nut to disengage. Adjust the wooden jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the front..
  • Widely Applied: The workbench vise clamps for woodworking are a great solution for wood shops and woodworking studios. Our quick release vise bench is easy to mount with 1/4" lag bolts (not included)..
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock