Top Magnet Wire 18 Gauge

BULVACK 2 Way Mini ANL Fuse Holder, Copper 0/2/4 Gauge to 4/6/8 Gauge 60 Amp Fuse Distribution Block for Car Truck Boat Audio Stereo Amplifier

  • 20 Ft.- 4 Gauge Strand SuperFlex Green Power Wire/ 3 Ft.- 4 Gauge 840 Strand SuperFlex Black Ground Wire.
  • 18 Ft.- 14 Gauge Green SuperFlex Speaker Wire/ 18 Ft.- 18 Gauge Black Remote Turn-On Wire.
  • 18 Ft.- Green Triple Shielded RCA Interconnect Cable/ 4 Gauge Black Wire Loom.
  • Heat Tested, Water Resistent InLine ANL Fuse Holder/ 150 Amp ANL Fuse.
Check Stock

Complete 4000W Gravity 0 Gauge Amplifier Installation Wiring Kit Amp Pk2 0 Ga Red - for Installer and DIY Hobbyist - Perfect for Car/Truck/Motorcycle/Rv/ATV

  • 20 Ft.- 0 Gauge Strand SuperFlex Green Power Wire/ 3 Ft.- 0 Gauge SuperFlex Black Ground Wire.
  • 18 Ft.- 14 Gauge Green SuperFlex Speaker Wire/ 18 Ft.- 18 Gauge Black Remote Turn-On Wire.
  • 18 Ft.- Green Triple Shielded RCA Interconnect Cable/ 0 Gauge Black Wire Loom.
  • Heat Tested, Water Resistent InLine ANL Fuse Holder/ 200 Amp ANL Fuse.
Check Stock

Saktopdeco 21.6 Inch Floral Stems Wire Green Paper Wrapped Wire 18 Gauge 20 Gauge 24 Gauge for Crafts Flower Arrangement

  • PACKAGE INCLUDED: 20 Pieces 18 gauge ,20 Pieces 20 gauge and 20 Pieces 24 gauge, total 60 Pieces dark green floral wires in package..
  • PRODUCT SIZE: Floral wire length is about 21.65 inches/55cm,18 gauge 1.2mm in diameter, 20 gauge 0.9mm in diameter, 24 gauge 0.55mm in diameter, covered with dark green paper..
  • PRODUCT MATERIAL: The wrapped wire is made of iron and covered with green paper , flexible for using..
  • FLORAL STEMS PRODUCT DESCRIPTION: This floral wire is ideally suited for arts and crafts projects. 18 Gauge green floral wire can be used as a flower rod, also used as an extra large bouquet.20 Gauge 24gauge stem wire easy to attach leaves with hot glue and to wrap floral tape around the completed stem, perfect for crafting crepe paper foliage stems with smaller leaves..
  • PAPER WRAPPED WIRE EXTENSIVE USE: This green floral stem wire can use it to make wreaths,bouquets of flower,floral crowns decorations and so on. It is flexible and can be twisted easily without fracturing, which will bring more convenience during the craft making,enjoy the DIY fun..
Check Stock

Recoil True 4 Gauge Complete CCA Amplifier Wiring Kits with OFC RCA Cable

  • Complete 4 Gauge 2-Channel Amplifier Installation Kits.
  • 17ft (5.5 meters) Oxygen Free Copper 2-Channel Helical twisted construction RCA interconnect cable. 17ft (5.5 meters) Premium Frosted Blue 4 Gauge power wire with ring terminal provides optimal power transfer.
  • 3ft (.95 meters) Premium Frosted Black 4 Gauge ground wire with ring terminal. 17ft (5.5 meters) Blue 18 Gauge remote turn on lead wire.
  • 25ft (8.0 meters) Premium Frosted Blue/Black 16 Gauge speaker wire. One Recoil ANL/Mini-ANL Fuse-holder with 120A ANL fuse offers ideal protection for high powered systems.
  • One Black rubber firewall grommet. Four 4 Gauge Nickel Plated Ring terminals with blue/black boots. Five 18 Gauge Spade terminals with blue/black boots. One Red 18 Gauge butt connector. Ten 6” Black zip ties.
Check Stock

MTX Terminator TNP212D2 1200 Watt 2 Ohm Dual 12 Subwoofers/Sub Box/Amp Package Bundle with Rockville RXC2D 2 Farad Stiffening Power Capacitor & RWK81 Amp Installation Wire Kit 3 Items

  • ...Capacitor. Features for dual subs + box: Dual Loaded 12" Subwoofer Enclosure. 2 12" Terminator Series Subwoofers Included. 1200 watts peak output. 400 watts RMS. 2" Aluminum voice coils. Single 4 ohm voice coils per sub (pre-wired down to a 2 ohm load). Rubber Surround. Polypropylene Cone.
  • MTX Logo on Dustcap. 48oz. Magnet. Frequency response: 37-150 Hz. Dual 12" Sealed Sub Enclosure. 5/8" MDF Solid Construction. Durable Black Carpeting. Stylish Logo in Carpet. Dimensions: 13.875"H x 29.625"W x 13.875" D. Amp Features: Terminator Series Class D Monoblock Car Amplifier. 400 x 1 watts peak @ 2 omhs. 200 x 1 RMS @ 2 ohms. LED power and protection indicators. Selectable bass boost (0, 6, 12 dB at 40 Hz). Mono gain control. Smart engage auto turn-on circuitry.
  • Built-in adaptive cooling fans. Built in low-pass filter (85 Hz, 18 dB/octave). CEA-2006 compliant amplifier. Frequency response: 20-85 Hz. Dimensions: 13-1/16"L x 10-3/16"W x 2-1/4"H. 8 AWG power and ground leads recommended. THD at Rated RMS Power: 1%. Signal-to-Noise Ratio: 73 dB. Fuse Rating: 25A x 1. Features: Rockville RXC2D 2 Farad Stiffening Power Capacitor. 2 Farad/12 Volt Stiffening Capacitor with 24 Volt Surge Capacity. Lucite Encapsulated Display and Logic Circuitry..
Check Stock

SoundBox Connected 0 Gauge Amp Kit Amplifier Install Wiring Power Only 0 Ga Wire

  • 1/0 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet / Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet.
  • In-Line ANL Fuse Holder/ 180 Amp ANL Fuse.
  • 2- Positive (+) Red Ring Terminals / 1- Negative (-) Black Ring Terminals / Installation Accessories/ Connectors/ Wire Ties/ Zip Ties: 8 PCS..
  • Wire Gauge Set To International Wire Gauge (Not AWG). Bulk Packaged. Not for Resale..
Check Stock

Recoil RCK84 True 8 Gauge Complete 4-Channel CCA Amplifier Wiring Kits with OFC RCA Cable

  • Complete 8 Gauge 4-Channel Amplifier Installation Kits. 65ft (20 meters) Premium Frosted Blue/Black 16 Gauge CCA speaker wire.
  • 17ft (5.5 meters) Oxygen Free Copper 4-Channel Helical twisted construction RCA interconnect cable. 17ft (5.5 meters) Premium Frosted Blue 8 Gauge CCA power wire with ring terminal provides optimal power transfer.
  • 3ft (.95 meters) Premium Frosted Black 8 Gauge CCA ground wire with ring terminal. 17ft (5.5 meters) Blue 18 Gauge remote turn on lead wire.
  • One Recoil Mini-ANL Fuse-holder with 80A ANL fuse offers ideal protection for high powered systems. One Black rubber firewall grommet.
  • Four 8 Gauge Nickel Plated Ring terminals with blue/black boots. Five 16-14 Gauge Gauge Spade terminals with blue/black boots. One Red 18 Gauge butt connector. Ten 6” Black zip ties.
Check Stock

SoundBox 4 Gauge Amp Kit True AWG Amplifier Install Wiring 4 Ga 20 Ft Power Cable, 3500W

  • 17ft (5.5 meters) OFC 4-channel dual twisted-pair construction RCA interconnect cable, with black nylon wire loom and satin chrome tips..
  • 17ft (5.5 meters) Premium True-spec 4 Gauge OFC red power wire with seamless ring terminal, wrapped in 6ft nylon braiding tubing. Two 4 Gauge nickel plated spade terminals with red/black boots.
  • 3ft (.95 meters) Premium True-spec 4 Gauge OFC black ground wire with seamless ring terminal. 20ft (6.4 meters) OFC 18 Gauge remote turn on lead wire. 30ft (9.5 meters) Premium True-spec 16 Gauge OFC red/black speaker wire.
  • One brass ANL/Mini-ANL Fuse-holder with 100A ANL fuse offers ideal protection for high powered systems. 1pc 80A and 1pc 120A ANL fuses are included. One black rubber firewall grommet..
  • Five 16 Gauge spade terminals with red/black boots. Four 16 Gauge speaker terminals. Two Red 18 Gauge butt connector. 10pcs 6” Black zip ties and 1pc screw/washer.
Check Stock

Recoil PCK8 True 8 Gauge 99.99% Oxygen Free Copper Complete Amplifier Wiring Kits, Subwoofer Installation Wiring Wire

  • 17ft (5.5 meters) OFC 2-channel dual twisted-pair construction RCA interconnect cable, with black nylon wire loom and satin chrome tips. 17ft (5.5 meters) Premium True-spec 8 Gauge OFC red power wire with seamless ring terminal, wrapped in 6ft nylon braiding tubing.
  • 3ft (.95 meters) Premium True-spec 8 Gauge OFC black ground wire with seamless ring terminal. 20ft (6.4 meters) OFC 18 Gauge remote turn on lead wire. 30ft (9.5 meters) Premium True-spec 16 Gauge OFC red/black speaker wire.
  • One brass Mini-ANL Fuse-holder with 80A mini-ANL fuse offers ideal protection for high powered systems.
  • One black rubber firewall grommet. Two 8 Gauge nickel plated spade terminals with red/black boots. Five 16 Gauge spade terminals with red/black boots.
  • Four 16 Gauge speaker terminals. Two Red 18 Gauge butt connector. 10pcs 6” Black zip ties & 1pc M6 screw/washer.
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock