Top Magnet Wire 20 Gauge

Rockville Pair RKL65MBW 6.5" 700W Marine Boat Speakers W/Led+Black/White Grilles

  • ...). Free air subwoofer does not require any enclosure. Max Power: 2400 Watts. RMS Power: 600 Watts. Polypropylene cone with Rubber edge. 2.0" 4 Layer dual voice coil. Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend). Magnet 80 Oz double stacked magnet..
  • Features of DBM50: Rockville DBM50 4000w Peak/980w Dyno-Certified RMS 5 Channel Marine/Boat Amplifier Amp+Mic. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rf Fosgte, etc). 2 Om 120 Watts x 4 + 500 Watts x 1.
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. Features of MRCA25: Rockville MRCA25 RCA Interconnect Cable. 25 Ultra-Flexible PVC Shield. Twisted Pair. Premium Audiophile Marine RCA Interconnect Cable. High Performance Water Proof RCA Plugs. Tinned Copper Strands for Sonic Purity. Outstanding Noise Rejection, Accuracy, and Frequency Response.
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • ...peakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover: Variable Low-Pass / High-Pass. Green/red status LED. ....
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 4 ounces(323 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 24 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0221\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 24AWG magnet wire is 1.0 pounds(823 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 24 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0221"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0126\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 1.0 lb(2120 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0126"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0157' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 1.0 lb(1300 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 1.0 pounds(1300 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

(4) Rockville RKL65MBW 6.5\ 700w Marine LED Speakers+Receiver+Amplifier+Amp Kit

  • .... Fully Marinized Against Salt & Fresh Water Conditions. Sun Light Treated cone makes this completely Waterproof and rustproof. Anti-corrosion Stainless Steel Terminals. Molded ABS plastic for amazing sound and protection from the elements while out on the water. Polypropylene Formed Cone. 10 Oz Y30 top of the line magnet supports high power handling. Rubber Surround. High quality ferrite magnet.
  • 1 inch Polymer Tweeter. Oversized 1 CCAW Kapton Voice Coil. Pre-installed Stainless-Steel mounting screws included. Perfect for Marine, Car, ATV and UTV applications. Impedance: 4-Ohm. Frequency Response: 35Hz - 20KHz. Sound Pressure Level: 90dB @ 1w/1m. Total Diameter: 7.3. Cutout Diameter: 5.6. Total Height: 3.86. Mounting Depth: 2.56. Features: RockvilIe RXM-F3 1600 Watt Peak/800w RMS Marine Class D Mono Block Amplifier.
  • CEA Compliant Power Ratings: .65 Watts RMS x 4 Channel @4 Ohms and 1% THD+N .85 Watts x 4 @ 2 Ohms 003c 1% THD .2 x 200 Watts bridged @ 4 Ohms 003c 1% THD. RMS Power Ratings: .800 Watts (4 x 200 Watts RMS) @ 2 Ohms .800 Watts (2 x 400 Watts RMS) @ 4 Ohm Bridged .500 Watts (4 x 125 Watts RMS) @ 4 Ohms. Peak Power: .1600 Watts (2 x 800 @ 2 Ohms or 1 x 1600 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistor....
Check Stock

Pyle Car Stereo Wiring Kit - Audio Amplifier & Subwoofer Speaker Installation Cables (4 Gauge), Blue (PLAM40)

  • CAR AUDIO WIRING: Universal car stereo audio system cable and wire kit. Includes all necessary pieces to set up your amplifier and subwoofer speakers.
  • INCLUDED AUDIO CABLES: 20’ ft. 4 gauge red power wire, 4’ ft. 4 gauge black ground wire, 20’ ft. 16 gauge blue remote turn-on, 20’ ft. 12 gauge stereo speaker wire.
  • MORE AUDIO CONNECTION: 20’ ft. stereo RCA audio cable, 6’ ft. black split loom cable conduit - enables connection for amplifier and subwoofer speakers.
  • CAR STEREO SOUND: Also includes (2) ring terminals 8G, (2) spade terminals: 8G, (5) spade terminals: 14-16G, (3) butt connector, (20) cable ties, (1) black grommet.
  • SOUND PROTECTION: Water-resistant in-line fuse holder along with an AGU type 60A gold plated fuse - suitable for car, boat, and mobile vehicle audio applications.
Check Stock