Top Magnetic Angle Measurement Gauge

Magnetic flexible base, metal Magnetic flexible base Universal magnetic holder for dial gauge, magnetic force meter base strong magnetic lever dial gauge base holder(Large Base)

  • Magnetic base for metal processing, machine measurement, calibration operations, precision workpieces, machine manufacturing inspection tools..
  • Easy to adjust the direction, universal arm can be fixed at any angle, easy to use, strong suction for holding steel surface..
  • There is a fine adjustment device at the clamp table, which can be adjusted in any direction..
  • In addition to the ordinary dial gauge, the lever gauge can be clamped to the lever dial gauge with the dovetail slot..
  • There is an ON / OFF switch on the base of the magnetic base bracket to reverse the magnetization and demagnetization..
Check Stock

BOSCH Digital Level, 24 Inch. GIM 60

  • DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
  • PRECISION & EASY RE-CALIBRATION by user back to factory setting with no special fixture.
  • RESOLUTION: ±0.05° (0° & 90°), ±0.2° other angles, switchable display between (°), slope (%), mm/M, inch/FT.
  • STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
  • improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
  • Auto invert display when gauge is upside down.
  • Measurement Range 0° ~ +/- 90° x 4 (360°) with full temperature compensation ensuring accuracy of measurements within 32°F to +122°F.
Check Stock

Digi-Pas DWL200 Electronic Torpedo Level, Protractor, Angle Gauge, Angle Finder, Bevel Gauge, Magnet, 0.1°, 7 inch

  • DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
  • EASY USER RE-CALIBRATION back to factory setting with no special fixture required.
  • RESOLUTION: ±0.1° (0° & 90°), ±0.2° for 1° to 89°, switchable display between degrees (°) or slope (%).
  • STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
  • improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
  • Auto invert display when gauge is upside down . BUZZER SOUNDS at 0 degree and any set angle.
  • HOLD BUTTON to allow user freezing display for ease of reading. Measurement Range 0° ~ +/- 90° x 4 (360°).
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • ...e suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the camber gauge is smaller than that of the products on the market,which can ensure higher accuracy,but the suction is still stable.When attaching the camber gauge to the brake disc,adjusting the positioning bubble to the center can make the test more....
Check Stock

Inclinometer RISEPRO® Digital Protractor Angle Finder Level Inclinometer Magnetic V-Groove 0~360 degree with Backlight 82413B

  • ✔️TWO MEASURING MODES & HIGH ACCURACY: Huepar digital angle finder comes with two measuring modes -Single Axis Mode and Dual Axis Bubble Mode,....
  • ✔️FIVE UNITS&BACKLIT LCD & AUTIBLE ALERT: Five selections of measuring units, degree(°)，percentage(%), mm/m, in/ft(in Fraction), in/ft(in....
  • ✔️MAGNETIC V-GROOVE BASE & SELF-INVERTING DISPLAY: With powerful magnetic V-groove bases at top and the bottom, this digital bevel gauge can be....
  • ✔️HOLD & ZERO FUNCTION: The current measurement value can be held on the display by short pressing the HOLD switch. The zero function enables....
  • ✔️PORTABLE & PACKAGE CONTENTS: In compact pocket size, this angle finder can fit into tight spots to get perfect measurements needed. With handy....
Check Stock

AUTOUTLET Digital Angle Finder Gauge Magnetic Angle Level Finder Digital Protractor Inclinometer Miter Angle Cube Level Box for Woodworking,Table Saw with Backlight 0-360° Rotation

  • 【Digital Angle Finder Gauge】Large digital LCD display with white backlight. You can easily read precise measurements with its bright backlit display. Waterproof IP54..
  • 【Magnetic Base】With Powerful Magnets in the base, the Magnetic Angle Level Finder can attach to Any Iron Surface. Flat bottom, easy to clean the attachment on the Inclinometer after use..
  • 【Accurate Measurements】This Angle Level Finder provides Fast and Accurate measurements. Wide Measuring Range of 4×90˚ (0 ~ 360˚) with ± 0.1 Repeatability. Displays Bevels in Degrees, Percent Slope..
  • 【Automatic digital inversion】When the Inclinometer is inverted, the number will be automatically reversed, so that you can directly see the measurement result..
  • 【Wide Range of Applications】The Digital Protractor can be used in Woodworking,Table Saw, Construction, Machinery, Telecommunications, Automobile etc..
Check Stock

Fear Inoculum

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

KASCLINO Paint Thickness Tester Meter Gauge, Car Body Paint Coating Film Thickness Tester, Car Body Damage Detector Magnetic Tip Meter, for Verifying The Car Thickness of Paint(As Shown)

  • Function: Quickly and accurately check if the vehicle has been painted in the past.It’s shaped as a small pen, and is made of high quality materials, making it the perfect choice to carry around and always be prepared..
  • Paint Thickness Meter Gauge with Magnetic Tip: This is a magnetic paint thickness gauge. It’s magnetic tip is extremely convenient in reaching curved surfaces, and in hard to reach places..
  • Magnetic Tip: This is a magnetic paint thickness gauge. It’s magnetic tip is extremely convenient in reaching curved surfaces, and in hard to reach places..
  • High Accuracy: The tester instrument is highly accurate with a micron-level color scale due to its compatibility with digital thickness gauge. Quickly and accurately check if the vehicle has been pain.
  • Color Measurement Scale: The colorful measurement scale will help you understand the state of the body you’re testing, and it will easily reveal any damages..
Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

  • 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
  • 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
  • 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
  • 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check Stock

Toolwiz Universal Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tools for Car Truck RV Tire Repair Caster Alignment Castor Wheel Gauge Camber Alignment Tools Camber Gauge

  • Universal automotive tool for wheel alignment, caster camber gauge compatible with BMW, Benz, Chevrolet, Toyota, Honda, Jeep, Citroen..
  • This Wheel Alignment Balancing Tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension....
  • The alignment gauge is suitable for accurate checking of the castor and camber angle. Measures the camber and caster angle on the wheel hub or brake....
  • With it's strong magnetic attraction, the camber alignment tool can easily attached on all kind metal surfaces..
  • Alignment tools automotive: Easy to read through accurate scale with range of measurement from -5 up to +5 degrees. You can ask seller for sending....
Check Stock

Huepar Digital Level Angle Gauge Mini Angle Finder Level Box with V-Groove Magnetic Base&Backlight LCD Bevel Gauge Inclinometer for Carpentry,Building, Automobile, Masonry -0-360°Fast Measurement AG01

  • ...ich can meet various working demands. This digital angle inclinometer provides convenience in woodworking, construction, machinery, telecommunications, automobile etc..
  • ✔️BACKLIGHT LCD DISPLAY & EASY-TO-READ: The Digital Angle Gauge has a large LCD display with backlight, which provides accurate, quick and clear measurements. Users can easily read the measurements even in dark environment. The backlight can be switched on and off freely. Also the Display will be inverted Automatically when the tool is upside down. In addition, this digital level tool will automatically turn off after 5 minutes of no operation to save battery..
  • ✔️MAGNETIC V-GROOVE BASE&EASY MARKING: With its powerful magnetic V-groove base at the bottom, this digital bevel gauge can easily and firmly attach to miter saw, band saw, table saw blades, metal poles and even round pipes. You can also use it on fences, tables, and other metal surfaces. Thanks to its strong magnet, there’s no need to worry about holding the tool in place while taking measurements. And the groove lines on the left and right sides are convenient for marking when measuring..
  • ✔️HOLD&ZERO FUNCTION: The current measurement value can be held on the display by short pressing the HOLD switch. The zero funct....
Check Stock

Digital Angle Gauge Level Box Angle Finder Digital Protractor Table,Saw Accessories with Magnetic Base Calculating for Carpentry/Building/Masonry/Automobile

  • 【Digital Angle Gauge】The Digital Angle Finder with 0 to 360° (4*90°) measuring range, is designed for measurement in calculated Industries, also....
  • 【High Accuracy】This digital angle finder with V-groove design on the measurement base, for better measurement on pipe, set Zero function at any....
  • 【Built-in Magnets】The level box with a powerful built-in magnet on the base secures the attachment to saw tables, fences, blades, and other....
  • 【Auto Power Off】Digital Protractor is operated by 2pcs AAA LR03 batteries(included) and can automatically Turn Off after 5 minutes of no....
  • 【LCD Display】the digital angle gauge's values can be clearly and easily Read on the LCD Display. Low battery indicates. Small and light, it's....
Check Stock