Top Magnetic Sticky Pad

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
  • Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....
Check Stock

Sticky Adhesive Replacement for Magnetic Car Mount POP-TECH 8PCS Circular Heat Resistant 3M VHB Double Sided Strong Sticker Pads for Magnet Cell Phone Stand & Finger Ring Holder & Socket Grip Mount

  • Used for magnetic phone car mount: Exclusively designed for various magnetic cell phone car mount bases with a diameter about 1 inch (23 mm), the car....
  • Very High Bond 3M Automotive Adhesives Replacement: Selection of high-quality Genuine 3M VHB adhesive pad, 3m circle adhesive tape double sided,....
  • EASY TO USE: Just peel off the paper from both sides and stick the small sticky adhesive 2 sided pad to the item, and convenient to remove it, quick....
  • Extra alcohol pads: to maximize 3m vhb adhesive stickers contact, please clean the 3m double sided adhesive surface with alcohol pad before use and....
  • 100% Satisfactory Service: We provide 12-month warranty and lifetime technical support for best after-sale service. Please do not hesitate to contact....
Check Stock

Car Phone Mount Magnetic,APPS2Car Dashboard,Windshield and Air Vent Mount,Phone Holder for Car,Universal Magnetic Phone Car Mount with Powerful Suction Cup,Built-in Strong 6 Magnets for all CellPhones

  • .... Industrial-strength suction cup base with strong sticky gel and 3M VHB sticky dashboard pad, mounting the car phone mount firmly on the dashboard or windshield or other surface.Twist-Lock base, Tighten the nut to clamp the air vent blade firmly, longer air vent gripper base will not block the air outlet..
  • Powerful Magnetic Force: This magnetic car mount build in 6 pieces of N52 strong magnets, magnetic force is much stronger than other mount that only 4 pieces of magnets. Securely holds your phone in place even with your car on the bumpy of roads and with the heaviest of smartphones..
  • Broad Compatible:This car phone holder mount compatible with iPhone 13 13 Pro Max 13 Pro 13 Mini 12 12 Pro Max 12 Pro 12 Mini 11 11 Pro Xs Xs Max, Samsung Galaxy S21+ S21 S20 S20+ S10 S10+ S10e S9 S9+ S8 S8+ S7 S6, Note 20 Ultra 20 10 9 8 6 5, Nokia etc.all smartphones, although with thick case. And the suction cup base and 3M VHB dashboard pad fits well with most flat surface(not include leather, vinyl surface). Twist-Lock air vent base work well with vertical and horizontal air vent..
  • Adjustable View Angle for Safe Driving: 360 degrees rotatable swivel mount head with ball joint design and screw-nut Lock ensures secure positioning and optimal viewing, tighten the nut t....
Check Stock

MU-CN 12 PCS Replacement Adhesive Stickers for Pop Phone Stand Mount Double Sided Adhesive Pads Circle Sticky Compatible with POP Out Phone Collapsible Grip & Stand/Car Magnetic Phone Mount Holder etc

  • Cell Phone Holder Adhesive: 12 PACK VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24....
Check Stock

LISEN Magnetic Phone Holder for Car Fit Curved Surfaces Car Phone Holder Mount Flexible & Stable Dashboard Magnetic Phone Car Mount with 3 Metal Plates Fit All iPhone 14/13/12/11,Pro,Pro Max,Android

  • LEGENDARY STABLE MAGNETIC PHONE HOLDER FOR CAR: With 2 3M adhesive pads, 6 magnets and an adjustable arch bridge design, this is definitely the most revolutionary magnetic phone car mount on the market. 2 sticky pads firmly stick the mount to any flat or curved surface. 6 magnets can hold all large mobile phones with metal plates. Arch bridge adjustment design can provide a larger and better field of vision. You won’t find a second such powerful and ingenious phone mount for car on the market..
  • DOUBLE ADHESIVE PADS, LARGER STICKING AREA: This magnetic phone mount for car adopts the design of double 3M adhesive pads with a larger area, and the sticking area is at least 200% bigger than other ordinary single adhesive pad one. The larger sticking area can fit the curved dashboard to the maximum extent. Thereby improving the stability and durability of the adhesive magnetic car mount by 200%.That car phone holder mount comes with 2 additional high quality 3M adhesive pads for replacement..
  • GRAPHENE 3M ADHESIVE, EXTREMELY STABLE: The adhesive strength of this upgraded double-pad magnetic car phone mount is over 66 lbs. The graphene-based adhesive pad has gorgeous heat resistance and heat dissipation. Tested by LISEN laboratory, in an atmosphere of 12....
Check Stock

8 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, VOLPORT VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs Double Sided Tape for Collapsible Grip & Stand

  • Cell Phone Holder Adhesive: 8 PACK Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: 2 PACK more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad in....
Check Stock

Magnetic Phone Holder - TACKFORM [ Tack Mount ] V.2.0 w/N52 Magnets [ for Car, Kitchen, Bedside, Bathroom ] Stick On Dash Mount with Authentic 3M Sticky Adhesive, for Phones, Tablets, and GPS Units

  • ...e and you're good to go. * SURFACE COMPATIBLITY TIP - Designed for hard surface. Hard Textured Dashboards are also suitable. This mount will NOT adhere to leather or soft rubbery dash surface. Clean dashboard thoroughly prior to installing..
  • Better Grip with SILICONE mount head - The softened silicone surface of the magnetic phone holder mount head allows cell phones to be securely mounted while driving and NOT slide around. The silicone surface grip prevents your device from slipping from the magnetic mount while driving. PLEASE NOTE: Metal plates will interfere with wireless charging..
  • High Strength - Tackform uses High Strength Neodymium Magnets to ensure a safe and secure hold on your device while driving. We ALSO provide extra sticky pads for the mount base so that when you decide to relocate your mount, you have a brand new sticky pad to put on the base and have it work like NEW.
  • Universally compatible with smartphones including iPhone X,8/7/6/6s plus/6/6s/5S/5/SE, Galaxy S9/S9+, S8/S8+,S7/S6 Edge, S7, S6, S5, S4 and other Android, Apple, Samsung, Blackberry and Microsoft devices..
  • Buy with Confidence - American Family Owned and Operated. Unlike other magnetic car mounts & cradles, Tackform offers a 100% Moneyback Guarantee. We strive to keep every....
Check Stock

AICase Silicone Magnetic Case for iPhone 14 Pro Magsafe Phone Cover with MagSafe Accessories Collapsible Grip and Stand for iPhone 14 Pro 6.1 inch 2022

  • 【Compatible】Magnetic slim fit silicone case only for iPhone 14 Pro 6.1" (2022 released). Compatible with Magsafe accessories and wireless charging.(Comes with Magnetic Phone Grip As a kickstand).
  • 【Magsafe accessories Compatible】:With built-in magnets that align perfectly with iPhone 14 Pro, this case offers a magical attach experience and faster wireless charging, every time..
  • 【Magnetic MagSafe Phone Grip Included】Magnetic Phone Ring Holder Offers a secure grip so you can text with one hand, avoid phone drops, and use it as a phone stand on-the-go..
  • 【Silicone Rubber Material Design】AICase iPhone 14 Pro Silicone case made with liquid silicone rubber material, silky-soft touch and good grip. And on the inside, there’s a soft microfiber lining for even more protection. It is easily to wipe off dust and dirt from the liquid silicone iPhone 14 Pro Case with a damp rag..
  • 【Easy Attach and Detach】: The magnetic ring holder stays strongly secure on your iPhone 14 Pro. Say goodbye to adhesive tapes and sticky residues.Wirelessly charge your phone by simply sliding off the magnetic Grip and Stand and setting on a wireless charging pad..
Check Stock

10 of Pop VHB 3 m Sticky Adhesive Replacement Compatible, 3 m Sticker Pads for Car Magnetic Phone Holder Double Sided Tape for Collapsible Grip & Stand and More

  • 8 pack 1.4inch VHB 3 m and 2 pack 1.2inch sticky adhesive exclusively designed for grip holder back and magnetic cell phone car phone mount base.
  • Double sided self sticky,This adhesive replacement kit is a good choice to remount your pop wall mount. With your pop wall mount, you can position the phone anywhere there’s a flat hard surface, like in the car dashboard, locker, bathroom mirror, refrigerator, bed post, wall etc.
  • Easy to use: You need to remove the used 3 m tape of popocket wall mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of pop grip and press firmly for 12 seconds for better connecting to the surface.
  • Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads..
  • Package include: 8+2 pack 3 m pop sticky adhesive gel, 2 pack alcohol pads.
Check Stock

Pop-Tech Ball Magnetic Car Phone Holder, Universal Dash Magic Mount Magnet Cell Phone Stand Mini Dashboard 360 Degree Rotating & Metal Plate for iPhone 13 Pro Max, Tablet, Socket Grip, Mobile Device

  • 【Heat Resistant Stick-on Adhesive】 Pop-Tech mini magnetic car mount phone holder select high-temperature safe adhesive to maintain strong adhesion in the sun. 3M vhb sticky adhesive of mounted magnetic phone mount keeps powerful viscosity at high temp climate up to 248℉. No worry about magnet phone holder for car use in hot summer. 2 pcs extra adhesive replacement are included for re-install to replace the glue or change the position of magnetic car mount..
  • 【All-Metal Strong Magnetic Phone Mount】 Upgraded version metal magnet phone mount introduce advanced premium N52 magnet, which holds cellphone tight. Just put your phone on the steele magnetic mount and feel it magnetically lock into place. Keep your mobile phone stable and far from vibration / impact in the vehicle in spite of sudden braking on bumpy road. Delicate magnet phone holder for car support your phone, tablet mini, GPS navigation securely on the center console..
  • 【Easy to Install in Any Cars】 Luxurious stylish magnetic phone holder takes up very little space with compact size(1.06-inch base) and can be installed in limited area at ease. Just stick on car dash board after the surface is cleaned and dried. Finish installation in seconds and wait for 24 HOURS to use for bet....
Check Stock

Caroline's Treasures SB3066SN Horse Refiillable Sticky Note Holder or Note Dispenser, Large, Multicolor

  • TAKE note! Caroline's Treasures sticky note holder is the perfect gift for anyone! This Sticky Note Holder is something special..
  • Artwork is added to the top of the sticky note holder and a small pad of 3 inch x 3 inch sticky notes are included at the bottom. The holder is refillable by removing the last piece of paper of a new pad of notes and sticking it to the board..
  • Holds 3 inch x 3 inch sticky notes. sticky note holder, post note dispenser, self stick note pad holders, note holder.
  • Perfect Gift for anyone at work or home. Great Bosses Day gifts, Secretary's Day Gift or your dog Groomer..
  • Horse gifts, Horse collectibles, Horse Sticky Note.
Check Stock

VANMASS Magnetic Car Phone Mount [Super Strong Magets & Ultra Stable] Suction Cup Phone Holder Aluminium Alloy Structure Handsfree Dashboard Window Car Mount Compatible with All Phones

  • 【Grandmaster Design & Streamlined Alloy Structure】 Industry-only made of Solid Aluminum Alloy & KING of Plastic, the 2022 Version took 6 years to....
  • 【Patented Multi-scene Design: Car/Desk/Kitchen/Bathroom/Gym】VANMASS magnetic phone mount brings sticky suction cup & steel-cored vent clip from....
  • 【Original 4 Industry-leading Technologies for Top Safety - Thanks to Millions of Users' Voice】1) Extreme 9LB magnetic force for all devices 2)....
  • 【Millions of Users Preferred 3-stage Slim Telescopic Alloy Arm - Longest, Sturdiest, yet No Block Your Driving View】Unlike any other BULKY plastic....
  • 【Luxury Present: Top-notch Configuration & Profound Package】Exquisite magnetic car mount (suction cup/vent clip/pad) is fully protected in Elegant....
Check Stock