Top Magnetic Transducer
Garmin Transom/Trolling Motor Mount Dual Beam Transducer Standard Packaging
- This dual beam transducer replaces the one included with your echo series 500 W 4-pin transducer.
- When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11614-00 is required.
- When using with the echo MAP 50s/70s, transducer adapter cable part number 010-11948-00 is required.
- Compatible with echo, echoMAP CHIRP 42dv,43dv,44dv,45dv,/52dv,53dv,54dv, 55dv, Striker..
Check StockMartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)
- High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
- Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
- Inputs: Custom 5-way bi-wire tool-less binding posts.
Check StockMartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)
- High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
- Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
- Inputs: Custom 5-way bi-wire tool-less binding posts.
Check StockGarmin Panoptix LiveScope Ice Fishing Kit, Includes Panoptix LiveScope Sonar System, 010-12676-50
- Includes a Panoptix LiveScope transducer with live, real-time scanning sonar that allows you to see up to 200’ in any direction.
- Two modes in one transducer — LiveScope Forward and LiveScope Down — to adapt to your fishing technique.
- locate schools of fish, and know exactly where to drill your next hole (when pair with your compatible ECHOMAP UHD unit).
- Rugged, portable carrying case fits your ECHOMAP UHD unit plus all included parts.
- Kit accessories include a swivel pole mount for the Panoptix transducer, foam float and cable grommet, 12Ah battery, charger, power cable and transducer adapter cable.
Check StockPresonus Eris E3.5 2-Way 3.5' Near Field Studio Monitor (Pair) with Knox Isolation Pads and Stereo Breakout Cable Bundle
- BUNDLE INCLUDES: Presonus Eris E3.5 2-Way 3.5" Near Field Studio Monitor Pair, Isolation Pads (2-Pack), and 3.5mm TRS to Dual 1/4-inch TS Stereo Breakout Cable.
- LOW-FREQUENCY TRANSDUCER: 3.5-inch (89 mm) Kevlar low-frequency transducer.
- HIGH-FREQUENCY TRANSDUCER: 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer.
- ACOUSTIC PORT: Rear-firing acoustic port for superior bass-frequency reproduction.
- VOLUME CONTROL: Front-panel volume control for speakers and headphone amplifier.
Check StockPressure Transducer Sender Sensor for Oil Fuel Air Water 1/8\NPT Thread Stainless Steel Sensor 30Psi 100Psi 150Psi 200Psi 300Psi 500Psi (100 Psi)
- Pressure Transducer is an advance pressure transducer than traditional mechanical pressure transducer..
- ±2%FS small output error, including nonlinear, hysteresis error and repeatability, full temperature range..
- Light weight and small size, convenient to install and operate..
- Pressure Transducer has complete surge voltage protection function. ????.
- Works for oil, fuel, diesel, gas, water, air pressure, can be used in oil tank, gas tank, diesel tank etc..
Check StockMartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)
- High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
- Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
- Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
- Inputs: Custom 5-way bi-wire tool-less binding posts.
- Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
- Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
- Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
- Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check StockHumminbird 720108-1 14 M360 2DDI Y MEGA 360 & 2D/MDI Y Cable
- Compatible with: MEGA 360, SOLIX 15 MSI G2, SOLIX 15 MDI G2, SOLIX 12 MSI G2, SOLIX 12 MDI G2, SOLIX 10 MSI G2, SOLIX 10 MDI G2.
- Combines MEGA 360 Imaging transducer and 14-pin Dual Spectrum / MEGA Imaging+ transducers (including Built-in MEGA Imaging) into one 14-pin plug for connection to the same, compatible SOLIX fish finder, or HELIX fish finder with additional AD HELIX M360 adapter..
- For use when connecting a MEGA 360 Imaging transducer to a compatible SOLIX or HELIX fish finder, in conjunction with a Built-in MEGA Imaging transducer or external 14-pin 2D /MDI transducer..
- If this cable is being used with a HELIX fish finder, then the #720109-1 AD HELIX M360 adapter must be attached between this y-cable and the HELIX unit, to the single plug end of the Y cable..
Check StockLovehappy Airless Sprayer Pressure Transducer 704492 for Titan Impact 440 540 640 740
- High quality aftermarket part for Titan pressure transducer 440i 440c.
- This part can be a replacement of pressure transducer for Titan 440 impact..
- Aftermarket Pressure Transducer Part number 704492.
- Product quality assurance, if there is a problem, please contact the seller, we have a professional team to quickly deal with all your problems..
Check StockHumminbird 411530-1CHO SOLIX 10 Chirp MEGA SI+ G3 CHO (Control Head Only) Fish Finder
- 10.1" Cross Touch touchscreen display with customizable views and settings that allow you to see multiple technologies at once.
- Features MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP Sonar, Humminbird Basemap, AutoChart Live, Wi-Fi, NMEA 2000, Bluetooth and Ethernet networking.
- Control Head Only Model: This model does not include a transducer. This CHO model is a great choice for those looking to connect to connect to Built-in MEGA Imaging on Minn Kota trolling motors, accessory transducer options like MEGA 360 Imaging, or share sonar data from an existing Humminbird Ethernet network.
- Dual Core Processor: Perform any task with speed and ease, thanks to the ultra-responsive interface and upgraded processing power.
- Airmar Transducer ID: For those looking to install accessory 2D Airmar transducers, SOLIX G3 provides transducer ID to make for fast and simple setup.
Check StockLUCKYLAKER Water Boat Fish Finders Depth Portable Handheld Fish Finder Transducer Wired Ice Fishing Finders Sonar
- Handheld Fish Finder: This kayak fish finders sonar transducer designed with cool looking outside,friendly using,it will be your functional tackle. The handheld fish finder portable could display many useful data for fishing, such as water depth, fish location, weeds, rocks, sands and so on. You can judge the approximate location of fish and fish schools by the portable fishing sonar from your experience..
- Portable Size for Easily Using:The handheld fish finder is easy to carry and store.Portable size,not need much space for storing,this portable fishing finder sonar transducer is easily to carry for outdoor, you can either put it in your pocket or hang it around your neck. The kayak depth finders supports battery save mode,it could make the fish finder working continuously even more than 6 hours in sea fishing, ice fishing and so on..
- Depth Finder Fishing Detection: The longest detection range of the kayak sonar sensor is 328ft (100m) below the sonar transducer. The water depth of this portable fish finder could be displayed either in feet or meter.Before your catching fishes,you can know the depth of bottom and fish location. This handheld fish finder portable will save your time to locate area and enjoy more fun..
Check StockRICANK Portable Fish Finder, Water Handheld Fish Detector Device Ice Kayak Fishfinder Shore Boat Fishing Depth Finders with Sonar Sensor Transducer and LCD Display Wired Gear Fish Depth Finder
- ...lake fishing, sea fishing , river fishing, and so on. It will be one of your best fishing accessories..
- 【Depth Readout】 The fish finder portable detector range is in a 45°cone underwater. The detection of depth range is from 3ft(1m) to 328ft (100m) below fishing sonar transducer. The fishing sonar sensor is with 25 ft cable and removable transducer float. Water depth shows by meters/feet..
- 【Powerful Functions】5 modes sensitivity options.
- unit of measure. Normally fishing depth finder supports 4-5 hours continuous working with brand new batteries. Open battery save mode can be working even longer..
- 【Package Included】1. Fish Finder Display 2. Sonar Sensor (Transducer) with 25ft cable 3. Removable Transducer Float with Rubber Stopper 4.Transducer Side-Scan Adapter 5. Stainless Bolt and Wing Nut 6.Neck Strap 7.Operation Manual..
Check Stock