Top Main Motor Power 11kw

ALEKO Inflatable Boats Heavy Duty Raft Fishing Boat Dinghy (250, Aluminum Deck, Red and Black)

  • Overall Length: 8' 4" / 250 cm *** Overall Width: 4' 6" /140 cm *** Inside Length:5' 2" / 161cm Inside Width:1' 11" / 60 cm.
  • Max. Passenger Capacity: 3 or 695 lb / 315 kg *** Max. Load Capacity:770 lb / 350 kg *** Max. Motor Power: 8 HP / 6 kW *** Max. Motor Weight:75 lb / 34 kg.
  • Transom Width: 2' / 61 cm *** Transom Height: 9.5" / 24 cm.
  • Tube Circumference: 3' 6" / 109 cm *** Tube Diameter: 1' 5" / 43 cm *** Number of Air Chambers: 3 + Keel.
  • Total Weight: 109 lb / 50 kg *** Deck: Aluminum.
Check Stock

HYYKJ 8 Layers Lab Sifter Standard Sample Vibrating Screen Sieve Shaker Machine for Particle Liquid Powder Lab 110V 120W 50 dB Low Noise

  • 【PROFESSIIONAL VIBRATING SCREEN MACHINE】The standard vibrating screen machine uses a vibrating motor as the vibration source. The vibration motor vibrates to vibrate the base of the screen machine, and then conducts through the base to the standard test sieve placed on the base to sieve the materialparticles smaller than the mesh surface of the test sieve..
  • 【8 LAYERS TEST SIEVES】The sieve machine can place up to eight layers of test sieves (includingbottom sieves), which can accurately separate one kind of pellets from 2 to 7 particle segments at the same time. High efficiency, exquisite designand durability, any powder and liquid can be sieved..
  • 【MAIN PARAMETER】Available sieve diameter: Ø200mm / 7.87''.
  • Screening particle size: 0.025mm-3mm (0.001-0.12'').
  • 【MAIN FEATURE】Small size, easy to move without space.
  • It can be automatically shut down at regular intervals.
  • The function is full and the operation is simpler.
Check Stock

TFCFL 2200W 10HP Electric Outboard Motor,60V Heavy Duty Outboard Motor Boat Engine with Air Cooling System，Inflatable Fishing Boat Engine,Brushless Motor Fishing Boat Engine Tiller Control

  • 【Main Parameters】Model：60V,Rated power (W)：2200,Starting system：Switch knob added,Rated speed (r/min)：3000 .Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor.
  • 【High Quality】Our 2.2KW motor boat engine brushless motor is comed with a muffler works for the motor to decrease the noise.Anti-winding function when Increase the thickening of the propeller. Omni-directional rotary joystick.
  • 【Air Cooling CDI System】This outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting..
  • 【Durable and Safety】Vertically installed engine design can improve power, performance and durability, high-quality carbonation system with ignition bulb can improve efficiency, twisting the throttle handle and engine stop button to improve Responsive, excellent outboard anti-corrosion system and anodes to improve durability.
  • 【 Applications and Service】Perfect match inflatable boats, fishing....
Check Stock

MXBAOHENG Pneumatic Paint Mixer 13-66 Gallon 2500RPM Pneumatic Mixer Portable Industrial Ink Coating Mixing Tool Machine, with 4-INCH Galvanized Impeller

  • 【Main Parameters】Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. The pneumatic paint mixer needs to be used together with air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² (99.56PSI)..
  • 【High Quality】This handheld pneumatic mixer has high-quality stirring rod and stirring blade.
  • The mixing rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM/22.83inch, which can fully stir the pigment deposited at the bottom of the container.
  • the stirring impeller is corrosion resistant, acid and alkali resistant, removable, etc..
  • 【Heat Dissipation Function】This pneumatic paint mixer with porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
  • 【Cylinder Motor】This pneumatic mixer is equipped with a cylinder motor, powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment, such as inflammable and explosive, dust, heavy load, humid workplaces, etc..
Check Stock

iDili 230MM Pneumatic Cutting Machine Wood Stone Concrete Cutter 8000RPM

  • Gas consumption per unit power: 37L/S · kw.
Check Stock

Pneumatic Wood Stone Concrete Cutter Cutting Machine 230MM 8000RPM

  • Gas consumption per unit power: 37L/S·kw.
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ...mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the mac....
Check Stock

YMJOINMX Electric Pea Sheller Machine Semi-automatic Pea Bean Sheller Machine Commercial Bean Pea Peeler Home Peeling Pea Bean Machine

  • 【Different Sizes Beans】This pea sheller has applied for patented technology and is cleverly designed to adapt to beans of different sizes..
  • 【Energy Saving Motor 】The motor of the pea peeling machine is an AC synchronous gear reduction motor with low power and high torque. The power consumption per hour is 0.04kw, and the power consumption for continuous use for 25 hours is only 1kw..
  • 【Easy to Operate】Open design, easy to clean. After use, the plate can be pulled out from one side to get a plate of peeled beans..
  • 【Stainless Steel】The bean peeler is surrounded by stainless steel plates, and the material is thick, stable and durable..
  • 【Stable Performance】The bean sheller does not have noise during use, and its performance is stable..
Check Stock

Coleman - 40 Amp 1 Pole 24v Coil Replacement Contactor C140A

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated....
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

Hipa Carbon Brush Alternator for Honda 177F 182F 188F 190F 4000W 5000W 6500W 7000W Generator

  • Compatible with 4kw 5kw 6.5kw 7kw generator equipped with 177f(9hp), 182f(11hp), 188f(13hp) and 190f(14hp) gasoline engine.
  • Compatible with Honda EB3500X, EB3500XK1, EB5000X, EB5000XK1, EB6500SX, GX390 9hp 11hp 13hp Generator.
  • These carbon brush will work for many different brands including Honda, Yanmar, Champion, ETQ, DeWalt, Westinghouse, Wildfire, Chicago Electric, United Power, Kipor, Kama, Harbor Freight, ETQ, Wen Power, and more..
  • Size: mounting holes distance (hole center to center): 25 ?¨¤ 0.50mm (about 1 inch).
  • Mounting Hole diameter: 6.0 ?¨¤ 0.25mm (about 1/4 in).
Check Stock

NIMTEK Carburetor for Honda GX390 13HP Chinese 188F Generac GP5000 GP5500 GP6500 5KW 5.5KW Generator Engine

  • NIMTEK Aftermarket Carburetor fits Honda GX390 13HP Chinese 182 188/182F 188F KW 5.5KW 6KW 6.5KW 389cc 420cc Generator /Engine /Motor.
  • Replace OEM: 16100-Z5R-743 16100-Z5L-F11.
  • Fits Generac GP5000 GP5500 GP6000 GP6000E GP6500 GP6500E GP7500W GP7500E GP8000E 5944, 0055770, 0055771 and 0055780 generators.
  • Fits Harbor Freight Predator 7000 / 8750 Watt Predator Generator, 420CC 13HP/1HP/15HP/16HP RATO R420-III Engine.
  • Carburetor fits Champion 40023 40030 41135 41152 41154 41302 41311 41331 41332 41351 49011 49056 C41155 C49055 CSA40036 CSA41155 CSA41155E ETL7007 Generator..
Check Stock

Single Cylinder Two Stroke Gasoline Toothless Saw 12 Inch Cutting Machine, 4.5kw Power Cutting Machine Concrete Cutting Machine Cutting Tools

  • ⚙️【PRODUCT SPECIFICATION】Material: Aluminum Alloy Box, Steel Protective Cover.
  • ⚙️【WIDE APPLICATION】 The Gas Power Cutter are used in fire fighting, municipal construction work, road and bridge construction and other motor and field work.
  • ⚙️【POWERFUL CUTTER】With 4.5kw Power, our Powerful all-around power cutter is ideal for cutting concrete and masonry in alteration, renovation and new construction work.
  • ⚙️【COMFORTABLE DESIGN】The features a compact design, low weight & correctly positioned handles to make the machine easier to handle. The comfortable handles provides more comfortable handling during long work shifts.
  • hold with both hands to effectively reduce vibration.
  • ⚙️【HIGH EFFICIENCY】This compact and efficient tool is powered by a 95 cc engine with a full 4.5kw for the most demanding concrete cutting.
  • The Power Cutting Machine is lightweight with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity.
Check Stock