Top Makita Double Bevel Mitre Saw

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Monster Jam Steel Titans - Xbox One (Xbox One)

  • ACCURACY: The hand miter saw has cam-shaped pins twist and lock with honeycomb base to secure work for accurate cuts.
  • MULTIPLE CUT ANGLES: Cuts mitres on 45-degree and 90-degree angles and face angles on 45 degree and 22.5 degree for octagonal shapes.
  • Extended lip on base holds mitre box in place while cutting and a built-in saw stop helps prevent cutting into mitre box.
  • CONVENIENT STORAGE: Molded-in storage bins to hold cam pins and pencil.
Check Stock

Stax '68: A Memphis Story [5 CD Box Set]

  • ACCURACY: The hand miter saw has cam-shaped pins twist and lock with honeycomb base to secure work for accurate cuts.
  • MULTIPLE CUT ANGLES: Cuts mitres on 45-degree and 90-degree angles and face angles on 45 degree and 22.5 degree for octagonal shapes.
  • Extended lip on base holds mitre box in place while cutting and a built-in saw stop helps prevent cutting into mitre box.
  • CONVENIENT STORAGE: Molded-in storage bins to hold cam pins and pencil.
Check Stock

CRAFTSMAN Mitre Saw, 12-Inch Saw & Clamping Box (CMHT20600)

  • ACCURACY: The hand miter saw has cam-shaped pins twist and lock with honeycomb base to secure work for accurate cuts.
  • MULTIPLE CUT ANGLES: Cuts mitres on 45-degree and 90-degree angles and face angles on 45 degree and 22.5 degree for octagonal shapes.
  • Extended lip on base holds mitre box in place while cutting and a built-in saw stop helps prevent cutting into mitre box.
  • CONVENIENT STORAGE: Molded-in storage bins to hold cam pins and pencil.
Check Stock

Saw, Miter - 10 Electric Miter Saw: Single Cut, Saws - Power

  • MOTOR: 12 amp motor for professional power.
  • BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
  • MITER SCALE: White on black miter scale for superior accuracy and visibility.
  • SLIDE SYSTEM: Linear ball bearing slide system.
  • POSITIVE STOPS: Positive stops on miter and bevel scale, for easy to read measurements and quick settings.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ... miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
  • ❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem, we can replace it at any time (please see the picture size) and its slideshow..
Check Stock

Nightcore Table Saw, 10-Inch 15-Amp Portable Multifunctional Saw w/36T Blade, 5000RPM & 45º Double-Bevel Cut Aluminum Table Saw, Bench Saw with Metal Stand & Sliding Miter Gauge for Woodworking

  • ...able saw can reduce additional friction for smoother sliding., while with 26 "tear capability it can easily tear larger wood materials. The watch saw has a 36T carbide blade and is designed with a transparent protection and tearing knife to protect you from accidental injuries and flying debris..
  • Height Adjustment & Double Bevel Cut: Featuring a double bevel cut from 0-45°, this portable table saw offers a 90° -3 "and 45° -2-1/2" bevel cut. Moreover, this portable table saw is equipped with large hand wheel to control blade lifting, convenient for slotting, wire drawing or cut.
  • Miter Gauge and Rip Fence:The flexible sliding miter gauge can be easily adjusted from -45° to 45° cross cutting. In addition, self aligned tear fence, parallel guide on both sides, cutting more accurate, more stable, without any shaking..
Check Stock

Goplus Table Saw 10-Inch 15-Amp Portable Table Saw 36T Blade Cutting Speed Up to 5000RPM 45º Double-Bevel Cut Aluminum Table Benchtop Table Saw with Metal Stand Sliding Miter Gauge

  • ...Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips..
  • 【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
  • 【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
  • 【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and push stick when not in use. The on/off safety switch is available to control table saw stand and provide overload protection. And the 10 inch table saw can be used without the stand which is convenient for outdoor wood cutting..
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ... miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
  • ❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem, we can replace it at any time (please see the picture size) and its slideshow..
Check Stock

Excel Blades Metal Mitre Box Set with Heavy Duty K5 Handle and Razor Pull Saw Blade, Small Mitre Box and Saw with 2 Cutting Angles for Wood and Soft Metal

  • 100% Made in the USA, hand-powered table top mitre saw set made from premium aluminum and steel.
  • Aluminum construction Mitre Box has slots for both 45-degree and 90-degree cutting angles.
  • Razor Saw Set includes heavy duty K5 hobby knife handle with a 5" steel pull saw blade with 46 teeth per inch.
  • Used for cutting perfect angles in hobby and craft projects and can also be used for small DIY molding and framing projects aroiund the house.
  • Great for crafters and hobbyists, for cutting modeling materials including wood, plastic and soft metalDescription- 100% Made in the USA, hand-powered table top miter saw set made from premium aluminum and steel- Aluminum construction Miter Box has slots for both 45-degree and 90-degree cutting angles- Razor Saw Set includes heavy duty K5 hobby knife handle with a 5 steel pull saw blade with 46 teeth per inch- Used for cutting perfect angles in hobby and craft projects and can also be used for small DIY molding and framing projects around the house- Great for crafters and hobbyists, for cutting modeling materials including wood, plastic and soft metal.
Check Stock

Olympia Tools Saw Storage Mitre Box with 14-Inch Backsaw with 90 degree, 45 degree, and 22-1/2 degree Angle Slot Types Plastic Mitre Box Saw Storage Mitre Saw Box for Woodworker Carver Carpenter

  • PERFECT FOR WOODWORK: This woodwork tool set is the perfect pack for helping you to complete your wood work craft projects. Use the precision cutting tool to create angles for wooden frames, shelves and more!.
  • MULTIPLE ANGLES: Using this miter box set for woodworking, you can cut lengths of wood at either 90-degree, 45-degree, and 22-1/2-degree mitre slots., for precision wood cutting when it's needed most..
  • SAW INCLUDED: So you can get straight to work on any woodwork projects, you will also receive a 14" hand saw with this mitre. Of course, you can also use your own saw should your choose to..
  • SPECS: Overall, this miter box measures 11" x 5" x 3.4" and is made using ABS. The saw measures 17.7" x 3.7" x 1.2" ..
  • DURABLE DESIGN: Made using rugged ABS, this miter box and steel saw set will see you woodworking for years to come with the proper care..
Check Stock

Makita SP6000J1 6-1/2 Plunge Circular Saw Kit with Stackable Tool case and 55 Guide Rail Blue

  • 12 AMP motor with variable speed control dial (2,000 - 5,200 RPM) for optimum performance in a variety of materials.
  • Large cutting capacity (2-3/16" at 90° and 1-9/16" at 45°). Power Type- Corded.
  • Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°.
  • Makita SP6000J1 6-1/2" Plunge Circular Saw Kit, with Stackable Tool case and 55" Guide Rail.
  • Powerful 12.0 AMP motor for optimum performance in a wide variety of materials.
Check Stock