Top Makita Impact Driver

Makita XT1501 18V LXT® Lithium-Ion Cordless 15-Pc. Combo Kit (3.0Ah)

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 inches Lbs of max torque.
  • Variable speed impact driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 inches Lbs of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs.
  • Recipro saw provides 0-2,800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8,500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for optimum performance.
  • Includes - (2) 18V LXT Lithium-Ion batteries, rapid charger, XPH10Z, XDT11Z, XSS02Z, XRJ04Z, XAG03Z, DML185 and bag.
Check Stock

Makita XT507PT 18V LXT® Lithium-Ion Brushless Cordless 5-Pc. Combo Kit (5.0Ah)

  • Variable 2-speed Hammer Driver-Drill with Makita built BL Brushless Motor delivers (0-550 & 0-2,100 RPM) and 1,250 in.lbs. of Max Torque.
  • Impact Driver features 4-speed power selection (0-1,100 / 0-2,100 / 0-3,200 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,600 / 0-3,800 IPM) provides 1,600 in.lbs. of Max Torque.
  • 7-1/4" Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°.
  • Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4" stroke length for faster cutting.
  • High-luminance 4 L.E.D. flashlight provides 160 lumens.
Check Stock

Makita XFD13 18V 1/2 Brushless Drill Driver Bare Tool

  • Includes a Bare Tool Makita XFD13 Brushless 18V 1/2-in Drill/Driver.
  • Offers a 2-Speed Transmission to Deliver 0-500 or 0-1,900 rpm No Load Speeds.
  • Compatible with Several Makita LXT 18V Battery Models (Sold Separately).
  • Bare Tool Does NOT Come with Battery, Charger, or Case.
Check Stock

SDS Plus Ground Rod Driver Compatible with Hilti/DeWalt/Bosch/ Hitachi/Makita/Milwaukee SDS Plus Hammer Drills for 5/8' & 3/4' Grounding Rods(NOT Work with SDS MAX Hammer Drill)

  • 【Compatible with SDS-Plus】This ground rod driver is compatible with Bosch, Dewalt, Hitachi, Hilti, Makita, Milwaukee and all other SDS- Plus Ground Rod..
  • 【Size】6.8" (172mm) Length and 3/4" (20mm) ID and 1" (25mm) OD..
  • 【High Performance】Drive ground rods or rebar without a sledgehammer, saving you time and effort..
  • 【High Quality】SDS Plus Ground Rod Drivers feature a one-piece design made of high quality hardened steel with thick metal walls for impact, rust and corrosion resistance. Reusable and ideal for commercial and industrial applications..
  • 【Risk Free Purchase】1 Year Warranty. We are confident in the quality of the tool, if you have any issues with the ground rod driver, please let us know and we will help you resolve the issue quickly to ensure your complete satisfaction..
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Power Wheels Adapter for Makita 18V battery Dock Power,Makita 18V Dock Power Adapter with 12 Gauge Wire,Good Power Convertor for DIY Ride On Fan Truck Robotics RC Toys and Work Lights

  • Fully Applicable: 100% compatible with Makita 18v, our battery power connector fits your battery perfectly, and you can easily install and lock your....
  • Good Quality: Makita 18v battery dock adapter was made of good ABS plastic. Strong,Heat resistant,impact resistance,moisture resistance..
  • Easy to install: Makita 18V battery adapter can lock your battery well. Just move the power installation connector gently to the inside of the groove,....
  • Creativity & Entertainment: Power Wheel Adapter has installed 12 gauge wire.Enjoy yourself in DIY! Good Power Convertor for DIY Ride On Fan, Truck,....
  • Warning: Work with Makita 18v Li-ion Battery Only.Please check if it fits your battery before buying.Compatible with Makita BL1830 BL1840 BL1850....
Check Stock

Makita XT505 18V LXT Lithium-Ion Cordless 5-Pc Combo Kit with with B-35097 Impact GOLD Ultra-Magnetic Torsion Insert Bit Holder with 723086-A-A 6 Pc Recipro Saw Blade Assortment Pack with T-01395 6-1/2 16T Carbide-Tipped Circular Saw Blade Framing with T-01404 6-1/2 24T Carbide-Tipped Circular Saw Blade Framing

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of max torque.
  • Variable speed impact driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of max torque.
  • Variable speed recipro saw delivers 0-2,800 strokes per minute with a 1-1/4" stroke.
  • 6-1/2" circular saw delivers 3,700 RPM for faster cutting and ripping through wood.
  • Rare earth Neodymium magnet is 2x stronger than magnets in standard insert bit holders.
  • Contractor-Grade bit set is compatible with 1/4" impact....
Check Stock

DEWALT DG5121 Heavy-Duty Impact Driver Holster

  • ADJUSTABLE IMPACT DRIVER: This CLC impact driver holster has an adjustable strap and quick release buckle to hold drill securely in place..
  • DURABLE IMPACT DRIVER HOLSTER: Ballistic poly material provides strength and durability for this impact driver holster..
  • KEEP IMPACT DRIVER SECURE: The hook and loop back on this impact driver holster keeps strap back when not in use..
  • ANGLED IMPACT DRIVER HOLSTER: Angled holster provides better drill balance.
  • ADDTITONAL STORAGE: This Custom Leathercraft impact drive holster features added pockets and elastic loop hold bits, chuck key, drivers etc..
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • ...s, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down from yo....
Check Stock