Top Makita Xmt03z

Power Wheels Adapter for Makita 18V battery Dock Power,Makita 18V Dock Power Adapter with 12 Gauge Wire,Good Power Convertor for DIY Ride On Fan Truck Robotics RC Toys and Work Lights

  • Fully Applicable: 100% compatible with Makita 18v, our battery power connector fits your battery perfectly, and you can easily install and lock your....
  • Good Quality: Makita 18v battery dock adapter was made of good ABS plastic. Strong,Heat resistant,impact resistance,moisture resistance..
  • Easy to install: Makita 18V battery adapter can lock your battery well. Just move the power installation connector gently to the inside of the groove,....
  • Creativity & Entertainment: Power Wheel Adapter has installed 12 gauge wire.Enjoy yourself in DIY! Good Power Convertor for DIY Ride On Fan, Truck,....
  • Warning: Work with Makita 18v Li-ion Battery Only.Please check if it fits your battery before buying.Compatible with Makita BL1830 BL1840 BL1850....
Check Stock

Makita 162258-0 Vibration-Proof Side Handle

  • Compatible with Makita Power Tool Models 9031, 9501B, 9503BH, 9505BH, 6000LR, 9558NB, 9558PB, 9557PB, 9553NB, DA3010F, 9523NBH, N9501BZ, 9227CY (NOT Included).
  • Please Reference Tool Diagram to Ensure Part Compatibility.
  • Included: (2) Makita Handle Grips (Model #153489-2)(Part Only - Tools NOT Included).
Check Stock

Makita 161374-5 Replacement Reciprocating Saw Shoe for XRJ05Z

  • Fits the Makita XRJ05 Reciprocating Saw (Not Included).
  • Included: (1) Makita Replacement Reciprocating Saw Shoe (Tool NOT Included).
Check Stock

Makita 2 Pack - 4.5” Turbo Diamond Blades For Grinders & Circular Saws - Ultra-Fast Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVI....
Check Stock

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

Podoy Angle Grinder Outer Lock Nut for Compatible with Makita Dewalt Milwaukee Bosch Black & Decker Ryobi 5/8 -11 Fits All 4-1/2 4 Pack

  • For Compatible with Makita:Angle Grinder 9565CV Angle Grinder 9564CV Angle Grinder 9029 Grinder 9069 Angle Grinder 9016DB Angle Grinder 9047L Angle....
  • For Compatible with Makita: 9005BZ Grinder 9015B Grinder 9505BH Grinder 9527PB Grinder 9527NB Angle Grinder 9015DB Angle Grinder 9561CV Angle Grinder....
  • For Compatible with Makita 224399-1, 193465-4, 224568-4 parts. Compatible List is provided below for reference,Outer Nut Size: 5/8"-11，fits all....
  • Package include :4 pcs outer angle grinder flange nuts.
  • Non original aftermarket part,The part/product is not sponsored or endorsed by,or affiliated with the brands it fit,including Makita Dewalt Milwaukee....
Check Stock

Makita 10 Pack - 4 Inch Cut Off Wheels For 4' Grinders - Aggressive Cutting For Metal & Stainless Steel

  • ✅ 10 MAKITA Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, ....
Check Stock

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blade....
Check Stock

Makita 5 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2 x 1/4 x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Depressed Grinding Wheels for Metal | 4-1/2-Inch x 1/4-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ GRIND 2-3X MORE than lower quality & cost wheels due to this wheel’s carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide balanced Grind Life, Stock Removal Rate, Precision, Power Demands & Heat Buildup, allowing you to grind longer, consistently precise with maximal wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ EASILY & SMOOTHLY GRIND all steel and metal including welds, carbon steel, structural steel, iron, steel pipes and alloy steel over an extra-long life span due to Makita’s High-performance Brown fused Aluminum Grain and hard bond matrix | Synthetic Resinoid Bond is ideal for fast stock removal, high operating speeds and aggressive grinding action used by professional metal fabrication, auto shops, maintenance repair, construction & general industrial applications.
  • ✅ AVOID Premature Disintegration, Wheel Shatter, & Injury with lower priced wheels by relying on Makita’s proprietary strong bond matrix that binds Premium White Aluminum Ox....
Check Stock

2 PCS 18 Volt Lithium Replacement Battery for Makita BL1820 BL1860B BL1850B BL1830B 194205-3 194309-1 194204-5 LXT400 Cordless Power Tools - 3000mAh/54Wh

  • Perfectly Compatible: 100% Compatible with Makita 18V Lit-ion Battery BL1820 BL1840B BL1820B BL1815B BL1835 LXT-400 BL1845B BL1845 194205-3 194204-5....
  • Fast Charger: Charge Most Makita battery in 1-2 hours..
  • Fully Compatible : 100% compatible with Makita14.4 7.2V 18V LXT Lithium-ion Battery BL1830 BL1840,BL1850,etc. Also Compatible with Makita 7.2V 14V 18V....
  • This charger is CE, FCC, ROHS certified, tested and validated by manufacturer to match specifications of OEM products.It comply with security testing....
  • Customer Support:30-day money-back and 1-year Warranty! Please feel free to contact us if you have Any question..
Check Stock

Makita 1 Piece - 4 Inch Crimped Wire Wheel Brush For Grinders - Light-Duty Conditioning For Metal - 4' x 5/8-Inch | 11 UNC

  • ✅ 1 MAKITA Premium Light-Duty Crimped Wire Wheel Brush for Metal Conditioning | 4" x 5/8-Inch - 11 UNC Standard Thread - 0.012" Thick Wire | Engineered for use on Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CONDITION UP TO 3X Longer than lower quality or low priced brushes due to Makita’s carefully selected Premium Carbon Steel bound and balanced expertly & proprietarily together for unsurpassed crimped integrity for LONGER LIFE, SAFETY, SMOOTHNESS and EASE of use than other wire wheels in its class.
  • ✅ EASILY & SMOOTHLY Remove Light corrosion, rust & paint with superior flexibility and wire fatigue-resistance on RESTRICTED surface areas with minimal metal scratch risk | Makita’s Crimped Wire Wheel Brush is gentle on metal and made from top quality .012" tempered carbon steel wire that reveal a soft, pliable and paint-ready surface.
  • ✅ AVOID INJURY & Premature Wear with lower priced brushes by relying on Makita’s carefully balanced Wire diameter, density, length and bonded wire integrity for superior reliability, long life, safety, smoothness and ease of use than competitor wires that fly apart and prematurely tear, resulting in injury and project delays | For best results, apply g....
Check Stock

Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock