Top Male Hose Fitting

EVIL ENERGY Female AN10 to Male AN8 Flare Reducer Hose Fitting Adapter Black

  • These reducer adapter hose fittings are designed to quickly make converting female connection to male. Designed for smooth flow that gives better....
  • Multi Sizes Supplied:Available in 5 sizes : Female AN6 to Male AN4 ， Female AN8 to Male AN6 ， Female AN10 to Male AN6 ， Female AN10 to Male AN8....
  • APPLICATION- EVIL ENERGY Flare Reducer Hose Fitting is widely used in Oil/ Fuel/ Water/ Fluid/ Airline etc..
  • The hose reducer fittings are made of high-quality aluminum alloy material for strong strength. Anodised and hand polished finish add the final touch....
  • ENVIRONMENTAL FRIENDLY- Flare Reducer Fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality....
Check Stock

Tool Daily Pressure Washer Adapter Set, M22 to 3/8 Inch Quick Connect, 3/4 Inch to Quick Disconnect, Male M22 Hose Adapter, 9-Pack

  • ATTENTION: M22 14mm female fitting has 14mm inside plug, If pressure washer needs 15mm, it will cause leakage. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell..
  • 9-pack High power washer quick connect fittings include: 2-pieces Metric M22-14 female to 3/8’’ plug, 2-pieces 3/8’’ quick disconnect to M22 14mm male, 2-pieces 3/4’’ female to 1/2’’ quick connect, 2-pieces 1/2’’ plug to 3/4’’ male, 1-piece M22 14mm male to M22 14mm male..
  • M22 pressure washer quick connect fittings helps pressure washer hose quick connect to pressure washer pump or gun..
  • 3/4″ Garden Hose Quick Connector Sets connect all 3/4″ standard garden hose to water inlet of power washer pump..
  • Pressure washer hose adapter has double M22 14mm male NPT ends. It converts the female M22 fitting of pressure washer hose to male M22 end. All high replacement couplers provide secure fittings and are convenient for frequent connection. Their working Pressure is rated to 5000 PSI..
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service.
  • ⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you ....
Check Stock

DOZYANT 12FT Propane Quick Hose Disconnect Conversion Kit for Weber Q Grill Easy Connects to RV Trailer Low Pressure System

  • The conversion kit include a 12ft quick connect hose and a 1/8”female thread x 1/4”male quick connect plug fitting.
  • Converts a Q Series gas grill to allow connection to the low pressure system on a RV Trailer or Camper.
  • The conversion kit use for Weber Q 100, 1000, 200, 2000, 1200, 2200 LP Grill and other propane appliance with has a 1/8" MALE thread.
  • You need to take the regulator off before connecting 1/8”female thread x 1/4”male quick connect plug fitting.
  • Hose ends fitting-1/4” Safety Shutoff Valve & Male Full Flow Plug.
Check Stock

M MINGLE Pressure Washer Swivel, 3/8 Inch NPT Male Thread Fitting, Stainless Steel, 4500 PSI

  • Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting. Eliminates hose twist and no kink..
  • 360 degree rotation. Reduces stress on the gun, hose and operator..
  • Max Working Temperature: up to 120℃, 250°F degree, suitable for hot and cold water. Made of high quality stainless steel. Max Working Pressure: 4500 PSI. Max Flow Rate: 30.0 GPM..
  • Connect 3/8’’ NPT male swivel to gun and connect to 3/8’’ female thread fitting to hose..
  • The universal swivel joint also can connect hose to hose..
Check Stock

Lichamp R134A Self Sealing Can Tap AC Refrigerant Adapter R134a Can Adapter Valve with Ball Valve and Tank Adapter Fits 1/4 or 1/2 Fitting Hose

  • 134A CANS OPENER KIT -- Automotive air conditioner freon can tap tool for connecting 1/2-16 ACME male fitting cans bottle mounth with ac charging....
  • SELF SEALING STYLE -- Suitable for the latest 50 State compliant self-sealed valve refrigerant container. Before buying, please identify whether the....
  • WIDE APPLICATIONS -- Include extra tank adapter with 1/4 inch female to 1/2 inch male thread fitting makes a easier charging project..
  • EXTRA TENSION HOSE -- Convenient 6 inches tension hose with ball valve for connecting 1/4 inch female fitting hose with 1/4 inch male fitting gauge,....
  • DURABLE AND SAFE -- Enlarged tap handle and lengthened ball valve handle for easy operation, body made of heavy duty brass and premium anodized....
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Master Airbrush Brand 100 Pipette Eyedroppers for Liquid Transfer and Airbrush Paint

  • Master Airbrush Brand Airbrush Fitting Conversion Adapter for Badger Airbrushes.
  • Converts a Badger airbrushes male M5 0.5 mm thread size to standard 1/8" BSP male thread size for easy connection to 1/8" BSP air hoses.
  • Adapter has 1/8" BSP male threads on the outside and Badger size female threads on the inside.
  • The adapters 1/8" BSP hose thread size is the most common hose fitting size used for many popular airbrush brands like Master and Iwata.
Check Stock

M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI

  • ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
  • If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
  • If leakage, please put teflon tape on the male threads of your wand or other products..
  • Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Jabsco 34060-0130 Marine Engine Oil Drain Hand Pump (10.25' Long, 1.25' Diameter),Brass

  • Screws onto threaded male 3/4″ garden hose fitting on top of dipstick tube.
  • Complete with 2′ of 1/2″ ID drain hose.
  • Fitting: connection for 3/4″ GHT male thread.
  • Dimensions: 10-1/4″ long x 1-1/4″ diameter..
Check Stock

SHINESTAR 1/2-Inch Natural Gas Hose (24-Feet) with Quick Connect Fitting, Propane to Natural Gas Conversion Kit, Perfect for BBQ, Grill, Pizza Oven, Patio Heater and More NG Appliance

  • [ Works Perfectly ] With a 3/8" female x 1/2" male adapter, you can use natural gas to supply propane gas appliance. Perfect for grill, patio heater, pizza oven, and more..
  • [ Perfect for ] The hose works for Blackstone, Weber, Charbroil Grill, and more NG appliances.
  • [ Enough Flow ] 1/2-inch inside diameter hose, provide adequate gas flow for grills and other gas appliance..
  • [ Easy to Install ] With quick-disconnect brass fittings on both ends make it easy to attach and remove this gas hose as needed..
  • [ Package ] Includes 24ft 1/2″ ID hose (1/2" male quick disconnect plug X 1/2" female flare), 1/2" quick connect/release fitting, 3/8" female x 1/2" male fitting..
Check Stock

Cen-Tec Systems 94225 Shop Vacuum 20 Ft Whip Hose and Power Tool Adapter Set for Dust Collection, Black

  • ... The 1. 0” interior diameter adaptor press fits on the end of the 1” whip hose end and can fit over male power tool or shrouds with a 1. 0” male connection. The 1. 0” adaptor has four concentric rings to press fit firmly tonto the tool and hold during use. Some tools and shrouds accept this same fitting as a 1. 40” tapered male connection where to soft TPE material holds firm.
  • The second soft 1. 50” TPE adaptor for mating with major power tools and shrouds equipped for a 1. 50” hose connection. The 1. 50” adaptor will press fit onto either the shop vacuum hose swivel adaptor or onto the 1” whip hose end fitting as deemed appropriate for the application.
Check Stock