Top Male Nipple Fittings

DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)

  • MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
  • CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
  • ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
  • DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

Air Compressor Fittings, Air Compressor Hose Kit, 15pcs Air Line Fittings and 1/4 inch NPT Quick Connects

  • Complete Set Of Air Compressor Fittings Features 2 Knurled Quick Connector - Couplers, 3 Male and 3 Female Plugs, 5 Male to Male Connectors, & Two Rolls of Teflon Tape..
  • The LE LEMATEC Air Compressor Quick Connect Fittings Feature a Quick Connect System While Reducing the risk of accidental disconnects..
  • 1/4 in Air Compressor Fittings Feature Heavy Duty Solid Brass Construction Preventing Air Leaks and Costly Replacements..
  • Rust and Corrosion resistant fittings for air compressors which are extremely durable and long lasting making them an excellent choice for anyone with an air compressor..
  • Milton M-style also know as type D or I/M Air Compressor Fittings complete with a convenient storage case. Proudly American Owned and Operated Company..
Check Stock

GASHER 4PCS Metals Brass Pipe Fitting Hex Nipple Brass Tone 1/4 x 1/4 NPT Male Thread Pipe 1/4Inch x 1/4Inch NPT Female Thread Pipe

  • 1/4"Female NPT thread parts on both ends for connecting 1/4" Male NPT thread parts together,1/4" Male NPT threads for connecting to Female threaded....
  • Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • The kit include: 2pcs x 1/4" x 1/4" NPT Male Nipple.
  • Durable solid brass construction is resistant to corrosion and long-lasting. Operating temperature range of -65 to +250 degrees F..
Check Stock

Paintball PCP Filling Hose Whip Extension Stainless Steel Air Fill Station & Charging System 60 inches with Quick Disconnect

  • Universally Fit- The charging system extends the line from your tank to the re-fill station.It have 8mm quick release male plug and female socket on the end..
  • Stainless Steel Material Support High Pressure- The braided stainless steel adapter support 4500 psi high pressure with 60 inch length,and the surface is polished plating, very strong and beautiful..
  • Save Time on Refill-It can help you to save time and frustration at your next scenario/ big game, so that you don't have to strip to refill your tank..
  • Easy to Use-You just need connect this hose to the fill nipple on HPA tank, tucking away when not in use..
  • Various Application-It has foster fittings at both ends,can use on air Venturi nomad 2，umarex ux origin etc..
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock

Tool Daily Pressure Washer Adapter Set, M22 to 3/8 Inch Quick Connect, 3/4 Inch to Quick Disconnect, Male M22 Hose Adapter, 9-Pack

  • ATTENTION: M22 14mm female fitting has 14mm inside plug, If pressure washer needs 15mm, it will cause leakage. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell..
  • 9-pack High power washer quick connect fittings include: 2-pieces Metric M22-14 female to 3/8’’ plug, 2-pieces 3/8’’ quick disconnect to M22 14mm male, 2-pieces 3/4’’ female to 1/2’’ quick connect, 2-pieces 1/2’’ plug to 3/4’’ male, 1-piece M22 14mm male to M22 14mm male..
  • M22 pressure washer quick connect fittings helps pressure washer hose quick connect to pressure washer pump or gun..
  • 3/4″ Garden Hose Quick Connector Sets connect all 3/4″ standard garden hose to water inlet of power washer pump..
  • Pressure washer hose adapter has double M22 14mm male NPT ends. It converts the female M22 fitting of pressure washer hose to male M22 end. All high replacement couplers provide secure fittings and are convenient for frequent connection. Their working Pressure is rated to 5000 PSI..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

NQN 12 Foot 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, Gas Cooker 3/8inch Female Flare Fitting, Stainless Steel Braided Hose and Gas Grill LP Regulator

  • Flare Male, 3/8" Flare Male x 3/8" Flare Male, 1/4" NPT Male x 3/8" Flare Male, 1/8" NPT Male x 3/8" Flare Male, 3/8" Brass Gas Ball Valve. These conversion connection extand the outdoor.
  • 【Premium Material】3/8" female flare fittings on both ends and 7 different types of adapters fittings kit of this 3/8" propane hose are made of 100% Solid Brass to ensure secure and durable for long-lasting to use. The 3/8” Female Flare propane hose is made of durable stainless steel braided with anti corrosion, anti-aging, air tightness, heat-resistance, flexibility features. This propane extension hose with CSA Certification, ensures air tightness and stability. High Pressure: 350 PSI..
  • 【Standard Fittings】This 3/8" Female Fitting x 3/8" Female Fitting Propane Hose comes with 7 different types of adapter adapters. Excellent 3/8" Propane Hose Conversion Adapter Kit for easy storage and portability, flexible use and space saving. This 12ft Braided Stainless Steel High Pressure Propane Extension Hose comes with a standard connector kit to take all your worries away. For RVs Best choice, travel trailer..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks....
Check Stock