Top Male Thread Fitting

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

  • 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Van Enterprises 2\ Bulkhead Tank Fitting Adapter with 2\ SCHEDULE 80 Male Adapter Kit for Rain Barrels, Aquariums, Water Tanks, Ponds

  • 2" uPVC Bulkhead Fitting [NPTxNPT] with 2" SCHEDULE 80 Slip Socket Male Adapter Kit.
  • Locking Nut is REVERSED THREADED. The Best Bulkhead Fitting in its class with THICK PREMIUM silicon seal gasket that will contour to the shape of the round barrels.
  • Premium Grade SCHEDULE 80 2" Male Adapter. UV resistance. Will not fade, crack, or peel. Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Flexible Configuration with 2" SCHEDULE 80 Male Adapter that can be Socket x Thread or Thread x Socket.
Check Stock

EVIL ENERGY 6AN Female to 6AN Male Flare 90 Degree Swivel Hose Fitting Adapter Aluminium Anodized Black

  • Female to Male Swivel Fitting Size: female AN6 to male AN6 (9/16-18 UNF) thread pipe connectors, 90 degree elbow flare union..
  • Advantage: the swivel 360° elbow design allows you to get things reasonable tight while still maintaining the swivel functionality so that you can ensure a proper connection and positioning before doing that final tightening down to lock everything into position.The swivel fitting has 37-degree "AN" sealing angle design assures leak free performance..
  • The 6an swivel fitting can be used with fuel, oil, gas, fluid, Water..
  • The female/male swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • The AN adjustable wrench is highly recommended. Six-month warranty provide by EVIL ENERGY .We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

M MINGLE Pressure Washer Swivel, 3/8 Inch NPT Male Thread Fitting, Stainless Steel, 4500 PSI

  • Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting. Eliminates hose twist and no kink..
  • 360 degree rotation. Reduces stress on the gun, hose and operator..
  • Max Working Temperature: up to 120℃, 250°F degree, suitable for hot and cold water. Made of high quality stainless steel. Max Working Pressure: 4500 PSI. Max Flow Rate: 30.0 GPM..
  • Connect 3/8’’ NPT male swivel to gun and connect to 3/8’’ female thread fitting to hose..
  • The universal swivel joint also can connect hose to hose..
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

EKWB EK-AF G1/4" Rotary Y-Splitter Fitting, 2x Female to Male Ports, Black

  • Y-shaped adapter fitting with 2 (two) G1/4″ BSP Female threads and one rotary G1/4″ BSP Male thread.
  • Useful for splitting or combining the liquid flow in parallel configurations.
  • Threading: 2x G 1/4″ (Female), 1x G 1/4″ (Male).
  • Thread length: 7.0mm (Female), 5.0mm (Male).
Check Stock