Top Manifold Heat Wrap

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock

SharkBite 3 Loop Radiant Heating Manifold, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, 24930

  • SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
  • WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
  • features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
  • DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
  • EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
  • SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.
Check Stock

Boomba Racing INTAKE MANIFOLD SPACER SILVER Compatible with Ford Focus ST RS 2.0 Fusion

  • Perfect replacement for 350Z roadster 2003‑2009 (non RevUp engine) and so on to meet your needs..
  • Specifically designed to help increase the manifold capacity and lower the intake air temperature..
  • Easy to install, direct to replace, no need any complicated tools or operations to save your time..
  • The manifold spacer is made of thermal polymer, comes with dramatic heat insulating properties..
  • According to the original factory specifications, replacing reference OEM number is BXIM‑40201..
Check Stock

MENSI 10 Jets Homemade Cast Iron Burner Assembly Flame Control System 41000 BTU with High Pressure Regulator with Hose DIY Forge Pizza Oven Turkey Fryer Accessories

  • The flame kit includes: 1 x 10 jets cast iron burner, 1 x 20psi adjustable regulator with 4 ft hose, 1 x 8" long steel manifold pipe, 1 x PTEF Sealing....
  • The burner is made of durable material cast iron with 10 nozzles propane BTU rating: 41000 BTU.
  • The regulator with hose is 4 Feet long which easy control the flame on/off and adjust the flame by thread the red knob.
  • The manifold is with 3/8" NPT outlet side easy to fit in the burner without sealing tape can work well, other side can connect the standard 3/8"....
  • This burner kit can be DIY for a fireplace, fire pit, cooktop and also can easy heat anywhere when you want to heat. ATTENTION!!!: If the Nozzle....
Check Stock

Dorman 264-968 Engine Valve Cover Compatible with Select Buick/Cadillac/Chevrolet Models

  • Direct replacement - made from injection molded polymer for superior fit and heat resistance, this valve cover matches the original equipment part for fit and function.
  • Complete solution - this valve cover includes a new gasket and new bolts for a complete repair.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service.
  • Related repair - this valve cover often fails due to a faulty intake manifold.
  • also replace manifold if it is missing PCV valve.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Hromee 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug

  • STRAIGHT MANIFOLD - Milled red aluminium body with nickel plating steel quick connectors for added durability and a leak free fit. The manifold body is made of high corrosion resistant anodized aluminum, making them stronger and 50% lighter than standard fittings..
  • COUPLER AND PLUG - 1/4" I/M type coupler and plug are made of nickle plated steel with anodized aluminum sleeves. The steel plug is heat treated to reduce abrasion on critical mating surfaces. Couplers are designed for high corrosion resistance, longer life and smoother operation..
  • INTERCHANGEABLE - Hromee air manifold kit has an aluminum In Line style with an inlet of 1/4 inch NPT and 4 outlets of 1/4 inch NPT sizes. It is compatible with Industrial "M", "D", and "I/M" type plugs and couplers. The max working pressure is 300 PSI..
  • SAVE YOUR TIME - This air tool allows you to connect and operate three tools from a single compressor and no need to disconnect your line when you want to switch tools. It also allows you to be able to connect to different types of connections without changing tools and hoses. You can also work with 4 different tools at the same time. You will get the job well done with ease in a less time..
  • EASY TO USE - The pneumatic manifold is equipped with quick connect....
Check Stock

Mota Performance A40252 Manifold Heat Spacer Kit - 1\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock

Mota Performance A40250 Manifold Heat Spacer Kit - 1/2\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock

METER STAR 41,000 BTU 10 Jets Homemade Cast Iron Burner Assembly Flame Control System and High Pressure Regulator with Hose for DIY Forge Pizza Oven Turkey Fryer Accessories

  • 1❤The flame kit includes: 1 x 10jet cast iron burner, 1 x 20psi adjustable regulator with 4 ft hose, 1 x 8" long steel manifold pipe.
  • 2❤The burner is made of durable material cast iron with 10 nozzles propane BTU rating: 41000 BTU.
  • 3❤The regulator with hose is 4 Feet long which easy control the flame on/off and adjust the flame by thread the red knob.
  • 4❤The manifold is with 3/8" NPT outlet side easy to fit in the burner without sealing tape can work well, other side can connect the standard 3/8"....
  • 5❤This burner kit can be DIY for a fireplace, fire pit, cooktop and also can easy heat anywhere when you want to heat.If you encounter problems....
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

Intake Manifold Plenum Spacer, Easy Installation BXIM‑40201 Heat Insulation Thermal Shield Plenum Spacers for Car Replacement for Infinit G35 Sedan 2003-2006

  • Specifically designed to help increase the manifold capacity and lower the intake air temperature..
  • Easy to install, direct to replace, no need any complicated tools or operations to save your time..
  • Perfect replacement for 350Z roadster 2003‑2009 (non RevUp engine) and so on to meet your needs..
  • The manifold spacer is made of thermal polymer, comes with dramatic heat insulating properties..
  • According to the original factory specifications, replacing reference OEM number is BXIM‑40201..
Check Stock

Helly Hansen Men s Vancouver Waterproof Outdoor Rain Jacket with Hood 599 Navy XX-Large

  • UPGRADED ELITECH TOOLS APP(ioS and Android): An intergraded app, that allows users to manage all Elitech tools as vacuum pump, digital manifold,....
  • SYSTEM LEAKAGE TESTING: Monitoring the process of pressure holding and vacuum leakage test precisely with temperature compensation..
  • SMART TOUCH SCREEN:  Elitech EMG-40V digital manifold adopts multiple HVAC tools in one unit. It shows changes in vacuum, pressure, and temperature....
  • AUTOMATIC CALCULATION: Measure the superheating and subcooling temperature of 88 refrigerants automatically, refrigerants used frequently can be saved....
  • CONVENIENT: Thanks to the 4-way valve and automatic heat pump mode, there is no need to switch over to different refrigerant hoses, which enables a....
Check Stock