Top Manual Cutter Machine

Streamline Imagined T-Rex Tape Dispenser

  • ...rious tapes with no protective film: scotch tape, kraft paper tape, double-sided tape, teflon tape, fiber tape, warning tape and etc. The maximum cutting length can reach up to 999mm, about 39inches. Suitable tape width is 6-60mm. If you have any other needs, welcome to consult us first..
  • SAVING YOUR MUCH TIME--This machine can hold two rolls of tape at the same time, which is convenient for multi-person operation, greatly saving much time and improving work efficiency! NOTICE: If loading two rolls, the sum of width of tape must be equal to or within 60mm..
  • A INTELLIGENT MACHINE--Via “SELECT” button, you could preset 6 groups of cutting length, and then the machine will automatically save them, once set, there is no need to set it again after power off and restart..
  • OVER EASY TO USE--This electric tape cutter is over easy to use: Please load the tape first, next set the required length, then set the mode (automatic or manual), and finally press the start button. After the machine allocates the correct length of tape and cuts it, pull it down. It is equipped with an English manual, please read the manual carefully before use.
  • if there are still any questions, please contact us for help..
  • TRIPLE SAFETY DESIGN--① There is a safety barrier at the sciss....
Check Stock

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock

Goplus 36-Inch Manual Tile Cutter, Professional Tile Cutter with Tungsten Carbide Cutting Wheel, Anti-sliding Rubber Surface and Removable Scale, Suitable for Ceramic Floor, Ceiling Tiles

  • 【Powerful Cutting System】This tile cutter has tungsten carbide cutting wheel for smooth cutting and durable. This 36inch tile cutter equipped with deep groove ball bearings, which is higher than other normal strengths to ensure perfect sliding. The 1650 LBS pressure of manual tile cutter makes cutting easier and more labor-saving..
  • 【Support Accurate Multi-angle Cutting】Equipped with a high-precision ruler, this porcelain tile cutter can perform parallel and angled cutting (from 0 ° to 60 °) and suits all kinds of tiles. With a stretchable scale, the tile cutter hand tool can cut a tile which is maximum size of 36 inches and maximum thickness of 0.5-inch (14 mm)..
  • 【Stable and Premium Frame】Made of heavy iron material, the 36 inch tile cutter is sturdy and the solid I-shaped tack does not deform. The wide and thick base, non-slip rubber pad and telescopic stand provide additional stability for larger tiles. The protective covers on the bottom provide stability while protecting the ground and ceramic tile cutter..
  • 【Ergonomic and Comfortable Handle】Curved and extended handle is designed according to users’ habits, which make cutting operation easier. Meanwhile, the non-slip plastic on the handle surface increases the comfort sense during....
Check Stock

Home Pro Shop Premium Glass Bottle Cutter Kit - DIY Glass Cutter for Bottles - Beer & Wine Bottle Cutter Tool with Safety Gloves & Accessories

  • ...asy steps with our glass cutter for bottles! 1-Place the bottle on support wheels. 2-Rotate until scored. 3-Run hot water over score mark, then dip in cold water. Watch it come apart in a clean cut within minutes!.
  • Includes Complete Glass Cutting Kit - This bottle cutter & glass cutter kit comes with a glass cutting machine, a glass cutter tool, cut-resistant safety gloves, a simplified instruction manual & glasspaper to smooth the edges of cut glass..
  • Create Meaningful Gifts - Reuse, Reduce and Recycle. Say no to glass waste and use this innovative glass bottle cutter kit to create beautiful handmade gifts for your loved ones that they will truly appreciate..
  • Our Promise - We have designed this bottle cutting kit keeping quality in mind. Your lifetime warranty is included with this purchase. In the rare circumstance that you are not completely satisfied with this product, it can be returned for a full refund. We are always available to our customers should any issue arise..
Check Stock

FIXM Glass Bottle Cutter, Updated Version Bottle Cutting Machine for Various Sizes Shapes of Bottle: Round, Square, Oval Bottle and Bottle Neck, Glass Bottle Cutting Tool for DIY Creation

  • UPDATED VERSION: The brand-new glass bottle cutter has been improved with an extra support in the middle of cutting machine, which turns out it’s much easier to operate. If you want to get your own DIY art bottle, you should put the bottle on the cutter and rotate it first, a scratch of bottle then will be appeared and after alternating it between hot and cold water, the handcraft will be finally done..
  • FIT MOST BOTTLES: This improved glass bottle cutting machine is suitable for most of bottles in different sizes and shapes unless the bottle is embossed. The best part of this bottle cutter is that it can easily change the position of blade, so you can even cut the thinner middle part of bottle. It is applicable to round bottle, curved surface area of round bottle, small size and large size of square bottle etc..
  • MULTIPURPOSE USE: There are all sorts of ways to cut different shapes of bottles so as to stimulate your imagination and ingenuity, like making table lamps, candle holders, goblets, vases, wind chimes, ceiling lamps and so many other DIY projects. Moreover, these bottles can be recycled and thus, protecting our environment to a certain extent..
  • GOOD CHOICE AS GIFT: Except for creation of DIY bottle art, it can also be considered as an interest....
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • 【WIDE APPLIACTION】Manually Operated HDPE butt fusion welding machine is suitable for PE and PP pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
  • 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single ....
Check Stock

Pilot Arc Plasma Cutter 50A Dual Voltage 110/220V Non-Touch Plasma Cutter Cutting Machine Air Inverter DC 1/2 Inch 12mm Clean Cut With Upgrade P80 Cutting Torch Plasma Cutting Equipment

  • Pilot Arc Non-touch Plasma Cutter Machine: The pilot arc cutting machine can effectively cut through rough, painted, and rusted surfaces and produce the least slag. The pilot arc technology allows you to cut without touching the metal. So it provides a better cutting quality and longer life for consumables..
  • Upgrade IGBT Technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. At the same time, it can effectively save energy and improve the life of the machine..
  • 50Amp Dual Voltage 110/220V Machine: Output Current [email protected].
  • [email protected] and effective cutting thickness: 1/2 Inch (12mm).
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz).
  • Dimensions: 15.7" X 10.2" X 13.4" (40*26*34 CM).
  • Wide Application: The plasma cutter CUT50P suitable for cut aluminum, stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials. Designed for both demanding industrial and construction work, or home and hobby use..
Check Stock

Moongiantgo Manual Meat Bone Cutter Rib Slicer Heavy Duty Chicken Cutting Machine with 16 Inch Knife SUS Bone Chopper for Beef Goat Pig Fish Butcher Commercial Kitchen (KD0298)

  • HEAVY DUTY - This hand bone cutter machine is full made of premium quality stainless steel: 430# SUS body and 30CR13 SUS blade. The net weight is about 8kg/17.6lbs, solid and durable!.
  • LEVER GUILLOTINE - This manual meat bone cutting machine is designed based on the principle of leverage. The 710mm/28inch long (with handle) knife can easily chop off bones at once! Save your force and time in your business..
  • NOTICE BEFORE ORDERING - This bone cutting tool can cut almost all the bones of pigs, goats such as ribs, chine bones, trotters, etc. As for the cows, it can ONLY cut the ribs, bones in other parts are too hard to cut!.
  • 200x386mm (7.9x15.2inch) large cutting board.
  • super stable balance foot. All is designed to bring you a professional cutting experience!.
  • WARRANTY - 1-year warranty: free replacement for any quality problems. Hope our manual bone-in meat cutter can bring you Hope our knife can bring convenience to your home kitchen or business!.
Check Stock

Pasta Maker Machine Roller Pasta Maker with 7 Adjustable Thickness Settings Manual Hand Rolling Noodles Maker with Crank Two Widths Cutter for Spaghetti Fettuccine Lasagna or Dumpling Skins

  • 【Adjustable Thickness】The pasta machine with a 7-position tightness adjustment knob, which can make dough pieces with thicknesses from 0.3 mm to....
  • 【Two Widths Cutter】The noodle maker can cut the dough into two widths, 2 mm or 6.6 mm (0.08 inches or 0.26 inches). It is very suitable for making....
  • 【Food-Grade Material】The roller pasta maker is made of nickel-plated steel, chrome-plated steel, and ABS. The roller and the noodle cutter are....
  • 【Authentic Pasta Making】The smooth adjustable roller can make the same length, well-balanced, chewy pasta every time, no longer squeezing and....
  • 【Easy to Clean】The pasta machine packaging includes the pasta maker, hand crank, and manual. The pasta machine adopts a separate structure, which....
Check Stock

Pasta Maker Machine, 7 Thickness Settings Dough Roller Pasta Maker with 2 Blades Noodle Cutter Manual Rolling Noodles Maker with Crank 2 Widths Cutter, for Spaghetti Fettuccine Lasagna Dumpling Skins

  • 【Two Widths Cutter】- This pasta maker has a double cutter head attachment(2-4mm) for different width of pasta.So whether you are prepare wide fettuccine for dinner or narrow spaghetti for a salad, Ravioli cutter makes delicious 3cm square ravioli with wavy edges..
  • 【High Material】- The roller pasta maker machine is made of Nickel-Plated Steel, ABS, 403 stainless steel, Chrome-Plated Steel. Nicked Plated Steel to ensure high quality, help prevent the adhesion of spaghetti, you do not need to worry anything about health..
  • 【Easy to Clean】- packaging includes pasta maker, hand crank, and manual. The pasta machine adopts a separate structure, Instruction will guide you how to assemble the machine, which is easy to clean and store. Note: Its pasta rollers and cutters should be wiped with a dry brush or dry cloth after wash..
  • 【Perfect Gift】- Fantastic gift for friends family, Also be great gift for those who love authentic homemade Italian cooking! If you have any questions please contact us, we will be happy to answer your questions..
Check Stock

BAOFALI Puzzle Maker Machine Cutter,Jigsaw Puzzle Making Machine with 10 Adhedive Foams,for Arts & Crafts Make Jigsaw Puzzles Scrapbooking & DIY Puzzle Jigsaw Mini Tool

  • [PACKAGE CONTENTS] -- 1Pcs BAOFALI 4.7x 7.87 x.93inch/12*20*10cm Jigsaw Puzzle Making Machine,10Pcs 6x4inch/15.3*10.3cm adhedive foams, puzzle maker machine cutter sufficient can meet your needs to make personalized sublimation puzzles,you adhedive foams sublimate your favorite photos on the puzzle..
  • [SAFE, HEALTHY AND DURABLE MATERIAL] -- Made of high-quality materials, the material is sturdy and durable, professional puzzle tool for manual puzzle cutting, beautiful color, easy to use, very suitable for manual classroom, school, home use..
  • [PROFESSIONAL DESIGN] -- Puzzle Maker Machine Cutter designed according to the needs of handmade craftsmanship. You can choose the pattern you like, photos of friends and family, photo albums, wall stickers, etc. Paste it on the sticky foam, you can easily press out the shape of the puzzle and enjoy The joy of making puzzle to puzzle..
  • [HOW TO USE] -- First tear off the protective paper of the cardboard, paste your own 4x6inch picture, put the cardboard under the puzzle-shaped die, press hard, you will get a puzzle piece, which is hidden underneath in the little drawer! Please do not press too many puzzle pieces at one time, otherwise the small drawer may not fit, which may damage the puzzle pieces..
Check Stock

Wire Slot Cutting Machine Manual Pvc Trunking Cutter Plastic Cutters Angle Adjustable Cutting Machine Guide Rail Cutter wire Channels Channel Covers Cutter Tool

  • 【Sharp Blade】 The blade of this guide rail cutter is made of high-quality spring steel. The excellent flexibility and hardness of spring steel make the blade sharp and strong. Such a sharp spring steel blade makes the cutting surface of the guide rail smooth and burr-free..
  • 【Precise Cutting】Our pvc trunking cutter is equipped with special positioners to cut 45° and 90° grooves and groove covers. The positioner allows you to achieve precise cutting on demand, improving the accuracy of your cuts..
  • 【Long Service Life】The body of the Wire slot cutting machine is painted to make it smooth and wear-resistant. And the painted surface can well protect the metal from oxid-ation to prolong its service life..
  • 【Carbon Steel Body】The body of this manual plastic cutter is made of high-quality carbon steel, which is very strong and durable. The high strength and hardness of the carbon steel body make the product durable and not easy to damage..
  • 【Wide Application】This rail cutter tool is suitable for cutting wire channels, wire channel covers, and metal rails such as aluminum rails, iron rails, and steel rails. The base of the guide rail cutter has been thickened to make it more stable and sturdy..
Check Stock