Top Manual Lathe

Erie Tools 7 x 14 Precision Bench Top Mini Metal Milling Lathe Variable Speed 2500 RPM & Digital Readout with 5 pc. Cutter Kit

  • Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
  • Drill, cut and turn metal, wood and plastic parts with precision..
  • Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
  • Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
  • Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-100L)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

Adjustable Double Bearing Live Center Revolving Center DIY Parts for Mini Lathe Machine Woodworking Tool

  • Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
  • High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
  • Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
  • Easy To Use: High precision, high hardness, highly efficient.wood lathe.
  • Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..
Check Stock

10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing

  • ★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • ★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
  • ★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
  • ★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
  • ★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Check Stock

Mechanical Tool Aluminum Alloy Synchronous Wheel XL Type 25 Teeth Power Transmission Accessories for Milling Machine for Drilling Machine for CNC Engine Lathe(25 Teeth 5mm Hole XL synchronous Wheel)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

New Replacement Belt for Asian Mini Lathe w/Model # Grizzly 33685 G8688

  • for use with 7x10 Harbor Freight Mini Lathe, 03911 Homier 7x12 Mini Lathe, 33684 Harbor Freight 7x10 Mini Lathe, 5278 Cummins 7x12 Mini Lathe, 82500 Micro-Mark 7x12 Mini Lathe, 82710 Micro-Mark 7x14 Mini Lathe, G8688 Grizzly 7x12 Mini Lathe.
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

Mini Lathe Wood Lathe Machine Multi-Purpose Type Lathe Milling Cutting Grinding Polishing Professional Table Top Lathe Tool Kit

  • Easy DIY woodworking lathe for woodworking Mini lathe DIY hobbyists, whether you are a beginner or have a little experience, you can quickly enjoy the fun of woodworking lathe turning and making your small wood decorative items by following our instructional tutorial..
  • ⚖Multi-purpose woodworking Mini lathe ⚖ 100W high torque motor, low noise, 7 adjustable speed (3500 rpm - 10000 rpm), can easily achieve turning, cutting, grinding, fine grinding, polishing, etc..
  • Professional woodworking Mini lathe toolsmulti-functional wood fixed chuck, professional miniature woodworking lathe turning tool, turning tool extra hard wear-resistant steel, durable within 1 years without worrying about the tool will be dull..
  • ⚖Wide range of use⚖ small woodworking Mini lathe can make wood crafts processing ceramics, pens, beads, etc., bring children to love woodworking artwork..
  • Support for beginners If you need support for woodworking Mini lathe processing, you can interact with us in the QA window on the product page and we will update the videos you need..
Check Stock

BestEquip Indexable Carbide Lathe Tools 1/2" Metal Lathe Cutting Tools 7 Pcs/Set Indexable lathe tools Super-Hard 40CR Lathe Bits Carbide Lathe Tool for Lathe Black Compact and Portable

  • Indexable &Sharp Inserts: 90°, 93°, 55°&95°carbide lathe inserts allow this lathe threading tool cutting with more flexibility and utility. Sharp,straight and even ccmt inserts can ensure high precision cutting..
  • Super-Hard 40CR Body: 40CR material of these lathe cutting tools has much higher hardness, so stable cutting is achieved due to its superior toughness and crack resistance..
  • Additional Subassemblies: This Lathe tool set comes with 2 installation wrenches in different type:3mm Allen wrench and T15 box spanner. A set of assembly screws and one 95°CCMT09T304 blade are free to provide much convenience to lengthen the service life of these metal lathe cutting tools..
  • Extensive Use: These metal lathe tools can be applied to digital-controlled lathe with various sizes, processin....
Check Stock

RIKON Power Tools 70-105 10\ x 18\ 1/2 hp Mini Lathe

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock