Top Mapp Gas Brazing Rods

BLUEFIRE MRS-7014B Trigger Start Gas Welding Torch Head for Propane & MAP PRO Fuel,Extend 1.5' Burning Tube Nozzle Piezo Self Ignition Handhold Cylinder Soldering Brazing Triple-Point Flame

  • OPTIMIZE FOR PROPANE: This torch is specially designed to use on Standard Propane and MAP PRO (Propylene), if you are using Bluefire MAPP, please DO NOT choose this one, switch to the MAPP Torch Special Version listed in the same page, which is optimized for Bluefire MAPP Gas.
  • CAUTION: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
  • EASY & SOLID: Trigger Start Ignition for instant 1-click flame light up, upgraded version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO. Adjustable flame knob for control flame size. Solid Brass constructed regulator valve for durability, threading fits CGA600 US standard fuel gas cylinder.
  • LONGER TUBE: 1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Strong and Stable Triple-Point Flame Structure for precision soldering/brazing.
  • ALL-PURPOSE: Suitable for soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts. You can even use it for cooking and camping..
Check Stock

BLUEFIRE Solid Brass Jumbo Pencil Flame Gas Welding Torch Head Nozzle Upgraded Full Metal Version Fuel by MAPP MAP Pro Propane CGA600 Cylinder Bottle (Torch Only)

  • Upgraded Full Metal Cover Version, change old design's plastic knob to solid brass constructed knob..
  • Our torch are made fully by Brass, not those cheaper zinc mix, Better Performance, Thicker and Heavier for durability..
  • Strong pencil flame to provide both working precision and optimized heat output, Max working temperature up to 1350℃, meets the most common needs for both professionals and DIY fans..
  • Smart sized, Easy to be used in any spaces, Manual ignition, torch run off MAPP, MAP Pro and Propane.
  • With recommended BLUEFIRE MAPP or other quality welding gas, this torch can easily handle soft soldering tasks, brazing copper tubing, thawing pipes, remove paint and tiles, wood working, melting, heating, and many other home and commercial purposes..
  • Perfect tool for plumbing, air-conditioning, automobile repair and body works, Jewelry and beads making, DIY tasks, crafts and hobbies, cooking and grill, camping and outdoor activities, and etc..
  • Torch Only, for complete kit with MAPP or Propane gas cylinder, please check our store..
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

Propane Torch Hand Hose, Mapp Gas Torch,Welding Torch,Hose Length 1.5M/60"Maximum Operating Temperature 1900℃/3600℉-with Hook (Quick ignition with valve Style)

  • 【Widely used】: for precision soldering/brazing, thawing and freezing pipes, large eddy current flame can be used for large diameter brazing, Maximum flame temperature is 1900℃/3600℉, suitable for Soldering up to 3/4"copper pipes.
  • 【Fuel】：Propane, MAPP, MAP-PRO, threading fits CGA600 US standard ,14.1 OZ MAPP Gas cylinder can be used for 2 hours.
  • 【Easy to use】: our product provides a 1.5M/60 " hose and a hook accessory. You can hang the cylinder on your body for easy operation.
  • 【Note】: when working, it will produce a lot of heat and consume a lot of air. Please do not use it in a closed environment for a long time. When using, try to keep the cylinder upright. After using, please pay attention to protect the thimble at the joint to avoid dust entering or bending to affect the next use.
  • 【Quality assurance】: products have obtained CE, ISO9001 certification, we will provide you with 1 year warranty service。We test the product when we leave the factory. Please don't dismantle it at will.
Check Stock

SKYTOU Heat Propane Mapp Torch Multi Purpose Includes 3 Nozzles/Tips High Intensity Trigger Start Torch Heat Shrink Torch Black

  • 【Propane Mapp Torch】: The heat torch has TUV Certification. Runs off Both Mapp Gas or Propane, Built-In Ignition | Flow Regulator & Flame Lock..
  • 【Easy To Use】: Built In Easy Auto Start / Off Ignition. Easily Ignites and Extinguishes the Flame Quickly..
  • 【3 Torch Tips / Nozzles】: Different nozzles can be replaced according to different requirements..
  • 【Flame Performance】: Adjustable Flame Control Dial Allowing for Desired Flame Size | Flame lock, so you don't have to hold the trigger..
  • 【Multi Purporse】: Suitable for Soldering, Brazing, Heat Treating, Loosening bolts, Light Welding, Stripping Paint, Sous Vide Cooking, Searing....
Check Stock

YaeTek Jewelry Micro Mini Gas Small Torch Welding Soldering Gun Soldering Torches Soldering kit with 5 Weld tips for Oxygen Cylinders, Hoses - Acetylene for Jewelers

  • 【Widely used】: for precision soldering/brazing, thawing and freezing pipes, large eddy current flame can be used for large diameter brazing, Maximum flame temperature is 1900℃/3600℉, suitable for Soldering up to 3/4"copper pipes.
  • 【Fuel】：Propane, MAPP, MAP-PRO, threading fits CGA600 US standard ,14.1 OZ MAPP Gas cylinder can be used for 2 hours.
  • 【Easy to use】: our product provides a 1.5M/60 " hose and a hook accessory. You can hang the cylinder on your body for easy operation，Equipped with quick start button, you can use it more conveniently.
  • 【Note】: when working, it will produce a lot of heat and consume a lot of air. Please do not use it in a closed environment for a long time. When using, try to keep the cylinder upright. After using, please pay attention to protect the thimble at the joint to avoid dust entering or bending to affect the next use.
  • 【Quality assurance】: products have obtained CE, ISO9001 certification, we will provide you with 1 year warranty service，We test the product when we leave the factory. Please don't dismantle it at will。.
Check Stock

BLUEFIRE Trigger Start Gas Welding Torch Head with MAPP Kit,Extend 1.5' Tube Piezo Self Ignition Nozzle Fuel by MAPP MAP PRO Propane 1lb Handheld Cylinder Soldering Brazing Triple-Point Flame

  • Complete Kit sell with BLUEFIRE 16.1 oz MAPP Gas Cylinder, 14% more Bonus Fuel! Ready-to-Work Kit..
  • Strong and Stable Triple-Point Flame Structure for precision soldering/brazing.
  • Trigger Start auto Ignition for instant 1-click flame light up, updated version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO, threading fits CGA600 US standard 1lb fuel gas cylinder.
  • 1.5″ Extended version of Stainless steel Burner, adds more reliability and safety.
  • Adjustable flame knob for control flame size, solid Brass constructed regulator valve for durability.
Check Stock

20lb Outdoor Propane Gas Tiki Style Torch - Easily Transform Your Place Into an Elegant Paradise with this Portable 71 inch Long Burning Torch Lighting That Will Compliment any Yard, Pathway, Backyard

  • TRIPLE FLAMES: Powerful Triple Turbo Flame, heat up to 2383°F (1306°C).
  • RELIABLE: Manual Ignition, the most reliable ignition method. Equipped with adjustable flame control. Updated version for best use with BLUEFIRE MAPP Gas.
  • HIGH INTENSITY: Jumbo output of 25,590 BTU/hr, consumption rate is 551.4 g/hr (7.5 KW), powerful enough to weld large diameter copper pipes and do high heat treating jobs...
  • HEAVY DUTY: Heavy duty design, working perfectly in any circumstances. Stainless steel burner tube, and solid brass constructed regulator..
  • ABLE FOR PROFESSIONALS: Optimize designed for brazing pipes and rods with large diameters, capable to accomplish the hard jobs that single tube torches cannot do..
Check Stock

BLUEFIRE MRS-7014A Trigger Start Gas Welding Propane Torch Head Specially for MAPP Fuel,Extend 1.5\ Burning Tube Nozzle Piezo Self Ignition Handhold Cylinder Soldering Brazing Triple-Point Flame

  • OPTIMIZE FOR MAPP: This torch is specially designed to use on Bluefire MAPP, if you are using Standard Propane and MAP PRO (Propylene), please DO NOT choose this one, switch to the Propane Torch Special Version listed in the same page, which is optimized for Standard Propane and MAP PRO (Propylene).
  • CAUTION: Tipping the gas cylinder to more than 60 degrees from its upright position may cause the torch to flare. It is recommended to start working with a disposable handheld cylinder at room temperature and to keep the torch upright as much as possible.
  • EASY & SOLID: Trigger Start Ignition for instant 1-click flame light up, upgraded version igniter for improved ignition rate, perfect work with Propane, MAPP, MAP-PRO. Adjustable flame knob for control flame size. Solid Brass constructed regulator valve for durability, threading fits CGA600 US standard fuel gas cylinder.
  • LONGER TUBE: 1.5" Extended version of Stainless steel Burner, adds more reliability and safety. Strong and Stable Triple-Point Flame Structure for precision soldering/brazing.
  • ALL-PURPOSE: Suitable for soldering copper pipes up to 3/4″, Soldering electronic circuits, Thawing frozen pipes and locks, Loosening rusted nuts and bolts. You can even use it for cooking and camping..
Check Stock

Propane Torch ,Mapp Torch Head,MAPP/MAP/PROPANE Gas Torch(Stainless Head)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

Propane Torch ,BBQ Torch ,MAPP/MAP/PROPANE Gas Torch,Soldering Torch (Basic simple payment)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

Smith Soldering Brazing Gas Saver Cutting Torch WDW101 Acetylene

  • Engineered for light brazing, soldering, and it is also capable of casting up to three troy ounces of gold or silver.
  • This system can be used with your choice of fuel: Acetylene, Propane, Hydrogen, Natural Gas, MAPP fuels, & Oxygen.
  • Includes one torch, size #3-7 curved tips (5 total), 8' hoses, and a complete instruction manual.
  • Makes a thread-thin flame that will heat up to 6300°F.
Check Stock