Top Marine Bevel Gear

Yibuy 2 PCS 45# Steel 16 Teeth 1.5 Module 8mm Hole Diameter Bevel Gear Wheel

  • 64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Ologymart 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear

  • Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
  • Pieces 75, ideal for DIY science and small production, product design and mechanical model.
  • 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
  • 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
  • 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.
Check Stock

Taylor Made Products 83556 Stow N Go Top-Seat Dock Box 27 x 46 x 26 Small

  • DURABLE CONSTRUCTION—The dock box molded fiberglass design holds up in all types of marine environments. The built-in top seat is constructed for....
  • EASY ACCESS —Our deck box is a breeze to open and securely close with the built-in gas lift shock, especially helpful with an armful of gear. This....
  • KEEP YOUR GEAR SAFE— You don’t have to worry about your gear with the stainless-steel lockable latch, giving you peace of mind that your marine....
  • MADE IN THE USA — Built right here in the USA, boaters know they can trust Taylor Made dock boxes to store their marine gear from life jackets to....
  • UNRIVALED QUALITY — Our storage boxes are designed for the marine life and have a smooth UV gel-coat finish on both the exterior and interior.....
Check Stock

GREEN FABWOOD 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear (Original Version)

  • 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.
Check Stock

Taylor Made Products 83550 Stow 'N Go Low-Profile Dock Box, 20 x 40 x 19-Inch/Small

  • DURABLE CONSTRUCTION—The dock box molded fiberglass design holds up in all types of marine environments. The heavy duty stainless steel lockable latch and hinges are corrosive resistant and will keep your gear safe and protected.
  • EASY ACCESS —Our deck box is a breeze to open and securely close with the built-in gas lift shocks, especially helpful with an armful of gear. These gas shocks, standard in all dock boxes, keeps the lid open even in high wind areas and unstable docks.
  • KEEP YOUR GEAR SAFE— You don’t have to worry about your gear with the stainless-steel lockable latch, giving you peace of mind that your marine accessories are safely stored on your dock or your boat. The stainless steel hardware is corrosion-resistant.
  • UNRIVALED QUALITY — Our storage boxes are designed for the marine life and have a smooth UV gel-coat finish on both the exterior and interior. Say goodbye to painful splinters or stray fiberglass pieces while you are grabbing or storing your boating gear.
  • MADE IN THE USA — Built right here in the USA, boaters know they can trust Taylor Made....
Check Stock

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

PENN® Senator® Star Drag

  • Backlight side plates with stainless steel reinforcement Rings.
  • Precision-machined stainless steel pinion gear.
  • High-strength marine grade bronze alloy main gear.
  • Stainless steel frame rings enhances rigidity to prevent “frame-flex”.
  • HT-100 drag washers provide smooth drag under heavy loads.
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188\ Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock