Top Marine Engine Oil Pressure Gauge Isolator Kit

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Quicksilver 10W-30 Oil Change Kit for 4-Stroke Yamaha F75 Through F115 outboards

  • Everything you need for an oil change on all Yamaha F75 through F115 outboards in one box.
  • Kit includes (4) 1L bottles of Quicksilver 10W-30 4-Stroke Marine Engine Oil, Quicksilver premium oil filter, drain plug seal and funnel.
  • Quicksilver 4-Stroke Marine Engine Oil is formulated with advanced corrosion inhibitors and provides outstanding lubricity to reduce wear, scuffing and scoring for improved long-term engine reliability.
  • Quicksilver oil is certified for use in all leading marine brands.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

Dual Battery Isolator Kit - 12 Volt 140 Amp Voltage Sensitive Relay - Complete VSR Double Battery Automatic Charger - Fits Trucks, ATV, SUV, UTV Boats and more - Safe, Water and Vibration Resistant

  • Dual Battery Isolator Kit - enables your accessories to run from a separate battery while the engine is not running on your vehicle while keeping your main battery charged and your vehicle always ready to go and start when you want it to. This dual battery isolator kit features 12 Volt 140 Amp Voltage Sensitive Relay Isolator and includes all the bits and pieces needed for a complete installation..
  • Fits A Wide Variety of Vehicles - Being the computer age that it is today, a lot of accessories, tools and gadgets that runs on electricity are essential in our everyday living or hobbies. This dual battery isolator kit with printed installation instruction manual gives you the power for your recreation without needing to worry about getting home after..
  • Complete Kit With Printed Installation Manual - This dual battery isolator kit manufactured by AA Ignition is a complete kit which includes the Isolator or Relay, battery Cables, battery terminals, copper lugs, heat shrinks, cable ties and a printed instruction manual..
  • Premium Rugged Construction - This dual battery isolator kit is all you need to charge a dual battery system. I....
Check Stock

WATERWICH Oil Pressure Gauge Kit 0-100 PSI Press Gauge Meter Includes Electronic Sensor 2inches 52mm Universal for 4 6 8 Cylinder Car Truck Vehicle Automotive

  • 1.Easily display at night:Our Oil Pressure Gauge is highly visible with a WHITE Light,Easy viewing at all angles during any lighting conditions,2-1/16" (52mm) Diameter with Black Dial, Illuminated Red Needle & black face gauge..
  • 2.Read Range:Our Gauge will precisely monitor the oil pressure level within your engine that is in the range of 0-100Psi,LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions..
  • 3.Easy installation:Our Oil Press Gauge includes electric wire with necessary mounting and installation hardware,no need other sensor,Come with the sensor can fit it well..
  • 4.WATERWICH Press Gauge Meter Reads Vehicle's PSI from 0 to 100 - For 4, 6, and 8 Cylinder Gas Powered Engines..
  • 5.DC12V compatible, Universal for 4, 6, and 8 Cylinder Engines Car, Truck, ATV, RV Vehicle Automotive etc. Suitable for all kinds of Oil Pressure Gauge, and display the Oil Pressure of the engine,All gauges are brand new, complete in box..
Check Stock

KUNTEC Cylinder Leak Down Tester Engine Compression Diagnostics Test Tool Kit for Piston Ring, Valve, Head Gasket

  • The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
  • The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
  • Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
  • Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.
Check Stock

JIFETOR Compression Tester Kit Small Engine Cylinder Test Pressure Gauge Tool Set for Testing Motorcycle Car Automobile Outboard Motor Chainsaw Snowmobile Auto Gasoline Petrol Gas Engine 300PSI

  • CYLINDER COMPRESSION TEST AND DIAGNOSTIC: JIFETOR automotive engine compression tester kit is used for measuring pressure on gasoline engine cylinder....
  • WIDE USE OF SMALL ENGINE COMPRESSION TESTER: There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters....
  • UNIVERSAL AUTO CYLINDER PRESSURE TEST GAUGE CONNECTORS: The straight and angled push-on connectors in the cylinder compression tool kit are equipped....
  • SUPERIOR GAS COMPRESSION TESTER PRESSURE GAUGE: Compression gauge adopts rubber cover protected 3" large dial with dual range color coded scale for....
  • SATISFACTORY CUSTOMER SERVICE: Customized blow molding case keeps JIFETOR 8PCS motorcycle car small engine compression tester kit in place and....
Check Stock

52mm 3 in1 Car Meter Auto Gauge Kit( 8-16V Volt Meter +100-250℉ Water Temperature Gauge+ 0-100 psi Oil Pressure Meter) Triple Auto Dashboard Gauge Set with Black Console for 12V Cars

  • APPLICATION: Applicable to most 12V cars, trucks, tractors and marine engines.
  • complete installation accessories and instructions are included, and professional installation is recommended..
  • PACKAGE INCLUDE: 1 x Voltage gauge +Water Temp gauge + Oil Pressure Meter Gauge .1 x three hole gauge bracket .1 x sensor. 1 x 1/8″ NPT sensor thread. 1 x installation instructions..
  • FEATURES: Numbers and pointer clearly show.
  • The dial has an illuminating devicel for easy reading in the darkness..
  • FUNCTION: The 3-in-1 kit from left to right are voltmeter, oil pressure gauge, water temperature gauge. it constantly monitors the value changes of oil and water temperature to ensure driving safety..
  • GREAT REPLACEMENT: Add a racing look and feel to your ride, high quality and light weight. Practical, could match and replace original equipment perfectly..
Check Stock

Lichamp 10pcs Compression Tester Adapter Kit Automotive Engine Cylinder Leak Down Compression Test Motor Pressure Gauge

  • FUNCTIONS: TEST CYLINDER COMPRESSION --- This cylinder compression tester kit is used for testing pressure on gasoline engine cylinder quickly and....
  • APPLICATIONS: GASOLINE ENGINE CYLINDER --- Come with different sizes rotary and push on adapters, widely suitable for most types and depth spark plug....
  • UNIVERSAL: INCLUDE 9 CONNECT ADAPTERS --- 10-in-1 engine tester gauge kit includes 1-piece spring buckle gauge.
  • 5-pieces brass adapters M10, M12, M14,....
  • RELIABLE: STABLE QUALITY TESTER GAUGE --- Max 300PSI or 20BAR dual pressure units with easy to read colored and large dial, acrylic glass gauge cover....
  • WARRANTY: WORRY FREE SHOPPING SERVICE --- If you aren't satisfied with your purchase, contact us through our email at any time you want, and we'll....
Check Stock

DASBET Car Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump and Vacuum Tester Gauge, Leak Carburetor Pressure Diagnostics

  • Function: The Carburetor Carb Valve Fuel Pump Pressure & Vacuum Tester Gauge Test Kit enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy-to-use: Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Check Stock

3350 Injector Height Gauge Kit for Detroit Diesel Engines Series 50&60 J-1853/J-42749/J-45002/J-42665/J-1242/J-35637-A/J-39697

  • 3350 injector height gauge kit for Detroit Series 50 and 60 engines. Similar to J-42749, J-45002, J-39697, J-42665, J-35637-A..
  • Used to properly set injector body height to the injector follower for proper fuel injector timing..
  • Apply to 78.2mm (Series 60, Engine: 1986-1993 DDEC I).
  • 78.2mm (Series 60 and 50, Engine: 1986-1993 DDEC II).
  • 78.8mm (Series 60 and 50, Engine: 1994-1997 DDEC III).
  • 80.3mm (Series 60, Engine: Late 1997 DDEC III).
  • 80.3mm (Series 60 and 50, Engine: 1997-1998 DDEC IV).
  • 81.0mm (Series 60 and 50, Engine: 1998-1999 DDEC IV).
  • 81.0mm (Series 60, Engine: 2000-2003 Marine).
  • Injector height gauge kit is made from high quality steel, providing enough strength and durability, corrosion-resistant, anti-wear property, no deformation..
  • Package: 1*Knurled handle, 5*Gauge Blocks(78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm)./ If you are not satisfied with the item, return it in 30 days and get a full refund.
Check Stock