Top Marine Engine Oil Temperature Gauge

8MILELAKE 9L Vacuum Hand Operated Engine Oil Changer Fluid Extractor Evacuator Pump Tank

  • Suction Probes: Ø4, Ø6, Ø8, Ø10,and 1pc of Ø4 brass probe) probe length 1M.
  • Use to evacuate automotive fluids:engine and gear oil, transmission fluid, brake fluid, coolant.
  • This oil changer pump is ideal for other liquids such as water and soluble oil,for Use With Most Vehicles and Machines.
  • 9 ltr Capacity device constructed from composite materials and suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery..
Check Stock

6-Gauge Set White Face 3-3/8 Mechanical

  • Premium stainless-steel bezel construction with backlit white face for night time use.
  • 3-3/8" diameter tachometer (8000 RPM) and mechanical speedometer (160 MPH) with popular 5/8-18 cable attachment.
  • 2-1/16" Diameter fuel level gauge, water temperature gauge (100-260 F), oil pressure gauge (100 PSI) and voltmeter (8-16 VDC).
  • Includes all sending units and capillary tubes for ease of installation.
  • Perfect for custom automotive or boat / marine projects.
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

GlowShift Tinted 7 Color 100 PSI Oil Pressure Gauge Kit - Includes Electronic Sensor - Black Dial - Smoked Lens - for Car & Truck - 2-1/16" 52mm

  • GlowShift 10 Color Digital Series Dual Temperature & Pressure Gauge Allows You to Monitor 2 Vital Engine Statistics from 1 Unit - Keep an Eye on Water, Transmission, Oil or Differential Temperatures, as well as Boost, Oil or Fuel Pressure.
  • Temperature Readings from 68° to 302° Fahrenheit - Pressure Readings from 0 to 145 PSI - Set Each Display to its Own Color - 2-1/16" (52mm) Gauge with 2 Digital Displays & Tinted Lens.
  • Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
  • Includes 1/8-27 NPT Temperature Sensor, 1/8-27 NPT Pressure Sensor, (2) 9' Sensor Harnesses, 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

Thunder Parts Original HOTSTART TPS101GT10-000 Engine Coolant preheater | 1000 watts 120V 8.4A | 1 Year Warranty!

  • Pre-Heat: Diesel and Gas engines Used in: Marine Heating Systems, Railroad operations, Heavy equipment, Trucks and Bus, Emergency generators, Oil and Gas and Industrial applications..
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle).
  • Engine Displacement: 350 CID (5.7 Liter) 120 V - 1000 Watts - AMPS: 8.4 - 60Hz | Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C).
  • Keep your engine running smooth this winter with reliable engine heaters. Reduce engine stress and smoke during cold start ups. HOTSTART keeps your engine heated and ready to deliver full-power without idling or delays. Quick Start every time!.
Check Stock

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • ... FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. Proper Oil pressure is CRITICAL at full throttle to prevent premature engine wear. For this reason, you need to arm yourself with the best indicator of accurate information..
  • Compatible with HD Big Twin Models 84 85 86 87 88 89 90 91 1984 1985 1986 1987 1988 1989 1990 1991 BIG V TWIN V-TWIN Engine Motor Models . IMPORTANT NOTE: (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY.
Check Stock

GlowShift 10 Color Digital Dual Temperature & Pressure Gauge Kit - for Boost, Oil Pressure, Water & Transmission Temp - Includes Electronic Sensors - 2 Multi-Color LED Displays - Tinted Lens - 52mm

  • GlowShift 10 Color Digital Series Dual Temperature & Pressure Gauge Allows You to Monitor 2 Vital Engine Statistics from 1 Unit - Keep an Eye on Water, Transmission, Oil or Differential Temperatures, as well as Boost, Oil or Fuel Pressure.
  • Temperature Readings from 68° to 302° Fahrenheit - Pressure Readings from 0 to 145 PSI - Set Each Display to its Own Color - 2-1/16" (52mm) Gauge with 2 Digital Displays & Tinted Lens.
  • Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
  • Includes 1/8-27 NPT Temperature Sensor, 1/8-27 NPT Pressure Sensor, (2) 9' Sensor Harnesses, 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

STANDARD IGN PARTS Engine Control Module Wiring Relay RY-412

  • Communicates the engine coolant temperature to the ECM to ensure proper air/fuel ratio, cooling fan and temperature gauge operation.
  • Thermistor placement within the housing matches original design to ensure proper output.
  • Proper thermal conductive grease to provide accurate temperature transfer to the thermistor.
  • Causes for replacement: check engine light, no/erratic gauge operation, no/erratic cooling fan operation, engine overheating.
  • Causes for replacement: rough idle, engine hesitation, poor fuel economy, failed emissions test.
Check Stock

957E10883 Fordson/Ford Dexta Tractor Coolant Water Temp Gauge for Dexta & super Dexta+

  • HIGH QUALITY: high-quality ABS material, strong, corrosion-resistant and durable. Long-term high water temperature will reduce the lubricating effect of the engine's lubricating oil, resulting in wear back damage to internal engine parts.
  • HIGH QUALITY: high-quality ABS material, strong, corrosion-resistant and durable....
Check Stock

3350 Injector Height Gauge Kit for Detroit Diesel Engines Series 50&60 J-1853/J-42749/J-45002/J-42665/J-1242/J-35637-A/J-39697

  • 3350 injector height gauge kit for Detroit Series 50 and 60 engines. Similar to J-42749, J-45002, J-39697, J-42665, J-35637-A..
  • Used to properly set injector body height to the injector follower for proper fuel injector timing..
  • Apply to 78.2mm (Series 60, Engine: 1986-1993 DDEC I).
  • 78.2mm (Series 60 and 50, Engine: 1986-1993 DDEC II).
  • 78.8mm (Series 60 and 50, Engine: 1994-1997 DDEC III).
  • 80.3mm (Series 60, Engine: Late 1997 DDEC III).
  • 80.3mm (Series 60 and 50, Engine: 1997-1998 DDEC IV).
  • 81.0mm (Series 60 and 50, Engine: 1998-1999 DDEC IV).
  • 81.0mm (Series 60, Engine: 2000-2003 Marine).
  • Injector height gauge kit is made from high quality steel, providing enough strength and durability, corrosion-resistant, anti-wear property, no deformation..
  • Package: 1*Knurled handle, 5*Gauge Blocks(78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm)./ If you are not satisfied with the item, return it in 30 days and get a full refund.
Check Stock