Top Marine Epoxy Paint For Aluminum

TotalBoat-487750 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-492063 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

Dolphin Premium Marine Topside Boat Paint | Gallon | Fiberglass, Wood, Metal, Aluminum | Easy to Apply & Long Lasting (Black, Gallon)

  • ✅ MARINE TOPSIDE PAINT FOR BOATS: For use above the waterline on fiberglass, wood, metal, aluminum, gelcoat and previously painted surfaces in good condition. Choose from a variety of popular color choices..
  • ✅ EASY TO APPLY: Professional results by simply brushing, rolling or spraying. Apply 2 thin coats on a prepared surface. Don't paint in direct sunlight and allow each coat to dry overnight..
  • ✅ USED FOR VARIOUS MARINE APPLICATIONS: Commonly used on primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, bridges, tanks, offshore oil rigs and other structures..
  • ✅ HIGH GLOSS LONG-LASTING FINISH: This marine structure and boat paint is scratch & chemical resistant and stands up to salt water, oil, gasoline, repeated washings for a long-lasting finish..
  • ✅ AVAILABLE IN MANY COLORS: Our topside paint is available in a variety of colors. Dolphin Boat Paints also sells boat primer, paint thinner and boat non-slip grip paint..
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-409337 TotalFair Marine Epoxy Fairing Compound for Fiberglass Wood Aluminum and Steel Gallon Kit

  • HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids.
  • ideal for filling and fairing dents, holes and....
  • SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum,....
  • EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it....
  • CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F.
  • CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not....
Check Stock

Co-parts Black Carbon Fiber Cloth Fabric 200g 19.5\wide 3K Weave 78.5\ long

  • ✅ STRONG AND VERSATILE - This Carbon Fiber Kit is UV stable and chip resistant. Use it for hoods, custom gauges, marine application, and more! Great for home projects. Economical and simple to use..
  • ✅ CONTENTS - This kit includes an 8 oz bottle of Epoxy, a 4 oz bottle of Hardener, and a 36" x 14" Carbon Fiber Cloth. It is securely packaged in a strong cardboard roll..
  • ✅ MIXING - Mixed at 2 parts A (Epoxy) to 1 part B (Hardener). Thoroughly mix both the Epoxy and Hardener in a clean, new, container for 2 mins. Be sure to scoop the sides and bottom while mixing!.
  • ✅ APPLICATION - Apply all of the Epoxy and Hardener mix onto the carbon fiber cloth. Use a paint brush or roller. Once dry, the carbon fiber will not be flexible and it will have a shine to it..
  • ✅ 110% SATISFACTION GUARANTEE - Get a full refund if not fully satisfied. Contact us ANYTIME after purchase and we will make it right..
Check Stock

TotalBoat-434282 TotalFair Marine Epoxy Fairing Compound for Fiberglass Wood Aluminum and Steel 2 Pint Kit

  • HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids.
  • ideal for filling and fairing dents, holes and....
  • SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum,....
  • EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it....
  • CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F.
  • CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not....
Check Stock

TotalBoat Crystal Clear Epoxy Kits (Gallon)

  • PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair projects. For use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead. Not suitable for clear-coating applications.
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive.
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you d....
Check Stock

AQUASEAL Table Top Epoxy Resin Epoxy - Bar Top Epoxy Clear Epoxy Resin Countertop Epoxy Marine Epoxy Resin Epoxy Countertop Kit Epoxy Kit 2 Gallon 2 Part Epoxy Resin Clear Adhesive Primer

  • Premium epoxy kit - Aquaseal epoxy resin and hardener kit delivers extra durable results ideal for boat building, composite construction, house....
  • All you need included - Aquaseal marine epoxy resin kit includes resin 1 gallon bottle, hardener 1 gallon bottle , 2x measuring cups, 2x plastic....
  • Easy to use - Mix 1 part epoxy resin and 1 part hardener for 20 minutes of work time on your marine epoxy projects. Use on wood, fiberglass,....
  • Faster curing and harder - Strong, clear epoxy resin, fully UV-resistant cures faster and harder, ideal durability for boat repair, table top epoxy....
  • Customer service - Please read the instructions provided with the Aquaseal marine epoxy before use. If you have any questions or issues, please....
Check Stock

DURALUX Marine Enamel, Aquamarine, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant aquamarine finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

DURALUX Marine Enamel, Haze Gray, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant haze gray finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock