Top Marine Paint For Boats

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

DURALUX Marine Enamel, Cruiser Blue, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
Check Stock

DURALUX Camouflage Paint - Duckboat Drab, 1 Gallon, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..
Check Stock

Duralux Camouflage Paint - Duckboat Drab, 1 Quart, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Vallejo Oily Steel Paint, 17ml

  • ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
  • ideal for fiberglass, wood and steel boats in salt water and fresh water.
  • ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
  • minimizes bottom paint build up so you have less sanding to do next season.
  • durable finish can be burnished for smoothness, speed & fuel efficiency.
  • LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
  • ideal for use in marinas and boat yards with environmental restrictions.
  • EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
  • Roller - 3/16” nap or foam solvent-safe cover.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
  • Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
  • for use on boat bottoms & hulls below waterline only.
Check Stock

How To Paint Your Fiberglass Boat

  • ...ng wears away gradually as the boat moves through the water.
  • minimizes bottom paint build up so you have less sanding to do next season.
  • durable finish can be burnished for smoothness, speed & fuel efficiency.
  • LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
  • ideal for use in marinas and boat yards with environmental restrictions.
  • EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
  • Roller - 3/16” nap or foam solvent-safe cover.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
  • Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
  • for use on boat bottoms & hulls below waterline only.
Check Stock

TotalBoat-520632 Aluminum Boat Paint for Canoes Bass Boats Dinghies Duck Boats Jon Boats and Pontoons White Gallon

  • TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first.
  • ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree....
  • EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get....
  • ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water.....
  • AVAILABLE IN EARTH BROWN, FLAT DARK EARTH, KHAKI, BLACK, WHITE, LIGHT GRAY, ARMY GREEN, AND OLIVE DRAB).
Check Stock

TotalBoat-520631 Aluminum Boat Paint for Canoes Bass Boats Dinghies Duck Boats Jon Boats and Pontoons Light Gray Gallon

  • TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first.
  • ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree....
  • EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get....
  • ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water.....
  • AVAILABLE IN EARTH BROWN, FLAT DARK EARTH, KHAKI, BLACK, WHITE, LIGHT GRAY, ARMY GREEN, AND OLIVE DRAB).
Check Stock

Interlux YBA068A/16 Trilux 33 Aerosol Antifouling Paint - White, 16 oz.

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

3M 06068 1 Quart Perfect-It Ultrafine Machine Polish- For Paint Finishing on Cars, Trucks, Boats and RVs

  • USE WHAT THE PROS USE– Scientifically formulated for the final step of professional-grade automotive and marine paint finishing, primarily on difficult dark colors.
  • ACHIEVE THE ULTIMATE POLISH – Removes tiny swirl marks and scratches on boats, cars, RVs and more.
  • EASY TO USE – Ultrafine polish is formulated to hold on the pad, limiting sling and mess.
  • BUFFS TO FINE FINISH – Leaves surface polished, shiny and ready for wax.
  • PART OF A COMPLETE SYSTEM – Use as the final step as part of the 3M Perfect-It Paint Finishing System for professional finishes on boats, cars, trucks, RVs and more.
Check Stock

TotalBoat JD Select Ablative Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon)

  • ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
  • ideal for fiberglass, wood and steel boats in salt water and fresh water.
  • ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
  • minimizes bottom paint build up so you have less sanding to do next season.
  • durable finish can be burnished for smoothness, speed & fuel efficiency.
  • LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
  • ideal for use in marinas and boat yards with environmental restrictions.
  • EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush – natural bristle.
  • Roller – 3/16” nap or foam solvent-safe cover.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
  • Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
  • for use on boat bottoms & hulls below waterline only.
Check Stock