Top Marshalltown Tools Float

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
  • when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
Check Stock

Pewter Flasks and Potato Salad

  • The MARSHALLTOWN Ultra-Lite Flooring Cutter 9" is essential for your next vinyl, laminate, or engineered hardwood flooring installation..
  • Cuts products up to 9" wide, 12 mm thick, and a Janka hardness of 1200..
  • At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity..
  • Unique features include an integrated handle for easy, single hand carry..
  • Flooring Cutter, laminate cutter, laminate flooring cutter, vinyl floor cutter, guillotine laminate floor cutter, laminate cutter tool, vinyl flooring cutter, vinyl plank flooring cutter, vinyl plank floor cutter, vinyl flooring cutter,.
Check Stock

Board Lifter Foot Alloy Anti-stripping Feet Buckle Drywall Plaster Sheet Lifting Tool to Protect the Surface of Foot

  • High Performace For The Home Or Tradesman.
  • Lightweight Construction At Just 0.63 Kgs.
Check Stock

Goldblatt 4" x 10" Grout Float - Extra Clean Rubber Grout Float, Floor & Tile Urethane Grout Tools with Soft-Grip Handle for Masonry, Concrete, Stucco, Drywall

  • ... 26.5 lbs (12 kg) tension for 1 minute without falling off.
  • Goldblatt Guarantee - We proudly stand behind the quality of our products. If any Goldblatt hand tool fails to deliver professional results, you can return it for a full refund. No questions. No hassles. Just honest business. Goldblatt provides high-quality tools and products for concrete, masonry, tile, drywall, and paintwork. We firmly believe that tradespeople deserve the best tools for building, and that these tools should be fair and affordable.
Check Stock

10 Pieces Fishing Bobbers Fishing Floats and Bobbers Fishing Floaters Crappie Bobbers Spring Slip Bobbers Fishing Float Accessories for Fishing (Black and Yellow,2.4 Inch)

  • ...o identify and help you fish with ease.
  • Easy to apply: fishing floaters bobbers are easy and convenient to apply, you can adjust the float position by rotating the spring, sliding or fixing buoy, taking the bait to the depth and keeping it in the area for longer time, nice tools for fishing.
Check Stock

VEVOR Bull Float Magnesium Concrete Float 48 x 8 Round End Concrete Float Tool Cement Tool Bull Concrete Kit Bull Float with 4 Float Handle Bull Float Bracket Concrete Tools Finishing Bull Float

  • Premium Quality: The surface of the trowel board, made of magnesium and aluminum alloy, is smooth and sturdy. An extruded float with a comfortable....
  • Excellent Efficiency: This concrete bull float has a thickened trowel board. Its unique round end design will not warp, or roll up the cement, and can....
  • Adjustable & Flexible: There is a bull float bracket to connect the handle and the trowel. It is designed to be adjustable in the angle and with....
  • Full-set Equipment: The concrete float kit equipped with a finishing trowel, a bracket, a rigid mounting base, and side panels, four handles (each....
  • Various Application: Our concrete finishing tools mainly used for smoothing and finishing after the construction of cement pavement. With its light,....
Check Stock

Xproutdoor Inflatable Fishing Float Tube with Adjustable Backpack Straps, Storage Pockets, Fish Ruler, Pump, Oar, Rod Holder, Fishfinder Mount, Motor Bracket, 350LBS Load Capacity, SP11

  • ... and 1 x motor mount bracket. And Xproutdoor fishing float tube itself comes with fish ruler, motor mount, 2 built-in rod holder and molded oar locks, 2 fishing hook stators, adjustable backpack straps for easy carrying, 2 big side storage bags and a net bag at the back of the seat, bladder valve cushion, repairing tools and a manual..
  • [350LBS High Load-bearing & Easy Carrying] This fishing float tube has 350 LBS load bearing and great buoyancy, allowing you to fish safely in the lake or river. Moreover, there are two buckle straps on the side of the seat to ensure that you will not fall off the seat. At the back of the float tube, there are two adjustable shoulder straps that makes it easy to carry to any destination. Enjoy fishing with this inflatable boat without any worries..
  • [Completely Waterproof & Durable Fabric] The waterproof wear-resistant 600D oxford fabric ensures the longevity of fishing tube. Completely waterproof material also ensures the long service life on the water and keep the safety..
  • [Enough Storage Pockets & Fish Ruler] There are waterproof big storage bags on both side of the float tube, which can store your phones, water cups, fishing baits or other fishing gears. 2 fishing hook stators are equipped in front of the boat to place....
Check Stock

Taytools 773437 Set of Two Pieces 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a set of 2 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass..
  • Microfinishing/lapping film will need to be cut to size to fit float glass plate.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Xproutdoor Fishing Float Tube Tube with Adjustable Backpack Straps, Storage Pockets, Fish Ruler, Fly Fishing Boat with Pump, Oar, Rod Holder and Mount, Fins, 350LBS Load Bearing Capacity, FT006

  • ...ir pump, 1 x pair of fins, 1 x oar, 1 x fishing rod holder, 1 x multifunctional mount. And Xproutdoor fishing float tube itself comes with fish ruler, 2 fishing hook stators, adjustable backpack straps for easy carrying, 2 big side storage bags and a net bag at the back of the seat, bladder valve cushion, repairing tools and a manual..
  • [350LBS High Load-bearing & Easy Carrying] This fishing float tube has 350 LBS load bearing and great buoyancy, allowing you to fish safely in the lake or river. Moreover, there are two buckle straps on the side of the seat to ensure that you will not fall off the seat. At the back of the float tube, there are two adjustable shoulder straps that makes it easy to carry to any destination. Enjoy fishing with this inflatable boat without any worries..
  • [Completely Waterproof & Durable Fabric] The waterproof wear-resistant 600D oxford fabric ensures the longevity of fishing tube. Completely waterproof material also ensures the long service life on the water and keep the safety..
  • [Enough Storage Pockets & Fish Ruler] There are waterproof big storage bags on both side of the float tube, ....
Check Stock

Xproutdoor Fishing Float Tube with Adjustable Backpack Straps, Storage Pockets, Fish Ruler, Fly Fishing Boat with Pump, Oar, Rod Holder and Mount, Fins, 350LBS Load Bearing Capacity, FT003,Khaki

  • ...ir pump, 1 x pair of fins, 1 x oar, 1 x fishing rod holder, 1 x multifunctional mount. And Xproutdoor fishing float tube itself comes with fish ruler, 2 fishing hook stators, adjustable backpack straps for easy carrying, 2 big side storage bags and a net bag at the back of the seat, bladder valve cushion, repairing tools and a manual..
  • [350LBS High Load-bearing & Easy Carrying] This fishing float tube has 350 LBS load bearing and great buoyancy, allowing you to fish safely in the lake or river. Moreover, there are two buckle straps on the side of the seat to ensure that you will not fall off the seat. At the back of the float tube, there are two adjustable shoulder straps that makes it easy to carry to any destination. Enjoy fishing with this inflatable boat without any worries..
  • [Completely Waterproof & Durable Fabric] The waterproof wear-resistant 600D oxford fabric ensures the longevity of fishing tube. Completely waterproof material also ensures the long service life on the water and keep the safety..
  • [Enough Storage Pockets & Fish Ruler] There are waterproof big storage bags on both side of the float tube, ....
Check Stock

Taytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film for Scary Sharp Sharpening System

  • This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40.
  • 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Float glass will accommodate a half sheet of lapping film.
  • Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

MARSHALLTOWN 56” Open Angle Monster Pry Bar, All-Steel, Powder-Coated, Made in USA, 10453

  • The 56” MARSHALLTOWN Open Angle Monster Pry Bar Burke Bar features a sharper pry bend that gives you superior leverage when prying loose forms, concrete, and other embedded objects..
  • This tool features a durable all-steel construction and a powder-coated finish that ensures a long tool life..
  • The 56” (1422 mm) length gives enough leverage for even the toughest jobs.
  • All Open Angle Monster Pry Bars are Made in the USA with Global Materials.
Check Stock