Top Masonry Anchor Bolt

Concrete Wall Hook, Lsqurel 304 Stainless Steel Expansion Hook Heavy Duty Concrete Hook Open Cup Hook Expansion Bolts for Concrete Wall (M6-10Pack)

  • Universal anchors-Our pool safety cover anchors were made to fit all swimming pool cover.
  • Specification-M10x100mm expansion bolt,Thread Diameter 0.39inch/10mm,Total Length 3.94inch/100mm,Expansion Tube Diameter 0.47inch/12mm.
  • Material-High quality 304 stainless steel,sturdy and firm,resistant to rust and corrosion.
  • Easy Install-Expansion Bolts come with nuts and washers.Concrete anchor and masonry anchor,easy to be mounted..
  • Application-Expansion Bolts is widely used in fence,burglarproof doors and window,canopy,air conditioning rach fixation,home decoration,engineering,etc.
Check Stock

Reedny,Eyebolt Bolt Stainless Steel Wall Concrete Brick Anchor Expansion Bolts Ring Screw Eyes,Heavy Duty Anchor Fastener Eye Bolt M8 4 Pcs

  • ★【Package Content】4pcs Expansion Hook Bolts..
  • ★【Size】M8* 80 expansion bolt with eye ring anchor.Thread diameter: 8mm, length excluding ring: 80mm.Need to use 12mm/0.47" drill hole for drilling..
  • ★【Material】Made of high quality 304 stainless steel, suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • ★【Use】in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc.Note: If the load has a large vibration, looseness may occur, so it is not recommended to install a ceiling fan..
  • ★【Easy to install】 Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
Check Stock

M8* 80mm Expansion Screw with Eye Ring Anchor Internal Eye Bolt Fastener 304 Stainless Steel 5 Pack (Ring Lifting Expansion Eyebolt M8* 80mm)

  • ★【Package Content】8pcs Expansion Hook Bolts..
  • ★【Size】M6* 80 expansion bolt with eye ring anchor.Thread diameter: 6mm, length excluding ring: 80mm.Need to use 10mm/0.39" drill hole for drilling.
  • ★【Material】Made of high quality 304 stainless steel, suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • ★【Use】in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc.Note: If the load has a large vibration, looseness may occur, so it is not recommended to install a ceiling fan..
  • ★【Easy to install】 Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
Check Stock

Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 1/4\ Diameter, 3-1/4\ Length, 2-1/4\ Threaded Length (Pack Of 20)

  • Start that DIY project you've put off for so long with this 20pc nut, bolt, and anchor sleeve assortment.
  • Hardware kit features various bolts, nuts, washers, and anchor sleeves for multiple projects.
  • Repair fences, burglarproof doors and windows, mount decorations, and use for concrete and masonry work.
  • Keep this 20-piece hardware kit in the house or give a set as a gift to friends or family.
  • Bolts measure from 3/4" to 2" long and 5/16" to 1/2" in diameter and ships with 20pcs.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors & Set Tool - 49 Pieces

  • 1/4"-20 x 1-1/2" Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel - 24 pieces.
  • 1/4"-20 Machine Screw Masonry Anchors - 24 Pieces.
  • Includes Setting Tool for Proper Machine Screw Anchor Installation.
  • Commonly used for storm windows and shutters to anchor into brick or masonry wall.
  • Fixtures can be removed or replaced without sacrificing holding power.
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock