Top Masonry Drill Extension

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

10 Pcs Masonry Drill Bit Set with Strength Carbide Tips Glass Drilling Bits for Ceramic Tile Wood Porcelain Mirror Plastic Marble Wall, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 Inch.

  • 10 PCS DRILL BITS: measured 1x1/8”, 1x5/32”, 1x3/16”,4x1/4”,1x5/16”,1x3/8”,1x1/2”, the long drilling bits with hex shank can be firmly and stably installed on the electric drill, they’re suitable for drilling holes in ceramic tiles and mirrors..
  • SUPERIOR QUALITY: made of premium metal alloy and coated with zinc, glass drill set is rust-proof and corrosion-resistant, and the strength carbide tip of masonry drill bits for concrete is wear-resistant and durable..
  • SPECIAL CARBIDE TIP: flat designed tip of masonry drill bit is sharp and performs well in penetrating objects, and the holes drilled are round and smooth without broken edges or tremor phenomenon..
  • MULTIPLE FUNCTION: drill bit set with hex shank is widely applicable to ceramic tile, porcelain pot, marble, glass, wood and plastic, and can be used for installing mirror, towel rack and toilet paper roll in bathroom..
  • PROFESSIONAL CUSTOMER SERVICE: please do not drill hole in the hard ceramic tile.
  • please do not use our masonry drill bit set with hammer drill, if you have any questions about this hex shank glass drill kit, please feel free to contact us..
Check Stock

Baker and Bolt Masonry Drill Bit Set, 5 Pcs Concrete Drill Bit Set, for Ceramic Tile Brick Wood Plastic Cement. Impact Ready. Tungsten Carbide Tips 5.12'' Long, Sizes 3/16, 1/4, 5/16, 3/8, 1/2.

  • GIFD - Our mission is simple: To help enthusiasts, homeowners, hobbyists, tradesmen, Shade tree Mechanics and perfectionists get the job f*#king done. Use cement drill bits hex set that will help you get the job done..
  • POINTED DESIGN WITH STRONG TUNGSTEN CARBIDE TIP: provides superior penetration to various materials and reduces breakout. This set of hex drill bits for concrete Staritng from 3/16 and 1/4 masonry drill bits up to 1/2 and a length of 5.12''.
  • IMPACT DRILL READY, TOUGH AND DURABLE: masonry drill bits that feature durability and rust resistance to serve as excellent tile drill bits. They keep sharpness for a longer time, making drilling better - with a minimum of pressure and less effort.
  • DON'T SETTLE FOR LOWER PRICE AND LOWER QUALITY - Instead of cheaper drill bits that break faster or require frequent replacement, try out our premium hex drill bit set. You'll get the longest lasting and the best quality for your money..
  • YOUR SATISFACTION IS GUARANTEED - Quality masonry Drill Bits Set that won't let you down. We provide premium drill hammer quality hex shank drill bit set. If you are not satisfied with our tool set, please contact us immediately..
Check Stock

10 Pieces Masonry Drill Bits Set Glass Drilling Bits for Ceramic Tile Wood Porcelain Mirror Plastic Marble Wall with Strength Carbide Tips in Sizes-1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 Inch, Gold

  • 10 PCS DRILL BITS coming with all popular sizes - 1/8”(1 INCLUDED), 5/32” (1 INCLUDED), 3/16” (1 INCLUDED), 1/4” (4 INCLUDED), 5/16” (1 INCLUDED), 3/8” (1 INCLUDED), 1/2” (1 INCLUDED), the long drilling bits can be firmly and stably installed on the electric drill, suitable for drilling holes in ceramic tiles and mirrors..
  • SUPERIOR QUALITY glass drill bits set: made of premium metal alloy and coated with zinc, rust-proof and corrosion-resistant, and the strength carbide tip provides durable and wear-resistant masonry drill bits for concrete..
  • MULTIPLE FUNCTION: drill bits set is widely applicable to ceramic tile, porcelain pot, marble, glass, wood and plastic, and can be used for installing mirror, towel rack and toilet paper roll in bathroom..
  • SPECIAL CARBIDE TIP: flat designed tip of masonry drill bit is sharp and performs well in penetrating objects, and the holes drilled are round and smooth without broken edges or tremor phenomenon..
  • PROFESSIONAL CUSTOMER SERVICE: please do not drill hole in the hard ceramic tile.
  • please do not use our masonry drill bit set with hammer drill, if you have any questions about this drill bits kit, please feel free to contact us..
Check Stock

Greenworks 90 Piece Impact Rated Driving Set

  • SET INCLUDES: (21) 135° Split Point Black Oxide Drill Bits，(4) hex shank spade bits，(8) Hex Shank Nut Setters，(1)Magnetic Bit Holder, (27) 1 in. Insert Bits，(4) Drill Stops, (1) Countersink, (1) Center Punch, (1)Hex Key, (6) 2 in. Power Bits, (5) Carbide-tipped Masonry Drill Bits, (5) Black and Silver Brad Point Drill Bits, (4) Hole Saws, (1) Hole Saw Mandrel, (1) Carrying Case..
  • VERSATILE: Suitable for drilling wood, metal, plastic, and masonry..
  • CONVENIENT STORAGE: The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized..
  • MAGNETIC BIT HOLDER: Magnetic bit holder holds drill bits for driving fasteners..
  • BLACK OXIDE FINISH: Provide superior durability and up to 50% improved lifetime compared to standard high-speed steel drill bits. They also reduce friction, giving you improved hole boring speeds..
Check Stock

WORKPRO Drill Bit Set, 300-Piece Drill and Driver Accessory Set for Metal, Wood, Cement Concrete and Plastic with Storage Case, W004549A

  • High quality drill bits made from superior HSS material titanium coated for long-lasting strength and durability.
  • Comprehensive drill bit set includes titanium drill bits, black oxide drill bits, wood drill bits, masonry drill bits, spade drill bits, screwdriving bits, ect..
  • Molded storage case included for easy organization and carrying.
  • Ideal for wood, metal, cement, masonry, plastic drilling As well as multiple driving and fastening applications.
  • Buy with confidence! If you have any issues, please don’t hesitate to contact us anytime.
Check Stock

Drill Bits Set/Screwdriver Bit Set, Longmate 226-Piece Drilling and Driving Accessories with Drywall Anchor and Screw, Drill Sets Combo Kit for Wood Metal Concrete Drilling and Screw Driving

  • 【EXCLUSIVELY DESIGNED FOR DIY】226-Pcs tool kit includes all the drill bits/screwdriver bits/anchors screw you need. 12 x HSS 4341 Drills: 2.5/3/3.2/3.5/4/4.5/4.8/5/5.5/6/6.5/8mm, 8 x Masonry Drills: 3/4/5/5/6/6/8/10mm,7 x Brad Point Wood Bits: 3/4/5/5/6/6/8mm, 28 x screwdriver bits, 170 x plastic anchors and screws, 1 x Magnetic bit holder.
  • 【HSS, BRAD POINT & MASONRY BITS】Twist drill bit is made by HSS4341 which is more hard and durable than 4241 for other similar drill bit. Suitable for most metal, wood and plastics Titanium coated for wear resistance and reduced friction. Masonry bits with Tungsten-Carbide tips ensure longer-lasting strength against brick and concrete by breaking up stone and masonry particles. Brad point bit for wood with piercing tips for accurate drilling starts and sharpened edge for easy cutting&churning out.
  • 【WIDE APPLICATION】 All-purpose for use on wood, metal, concrete, masonry, plastic drilling as well as multiple driving and fastening. Ideal for those everyday DIY drilling jobs at home and workshop with a range of drill bits to get the job done quickly and accurately.
  • 【WELL-ORGANIZED】With a side drawer storage box, easy to organize and sort. All accessories are placed in order, no mess.
Check Stock

10PCS 1/4 Inch carbide drill Tile Glass bit for Glass, Concrete, Marble, Plastic, Brick, Tile, Wood and Cement,etc

  • 【HIGH HARDNESS, DURABLE】High quality Tungsten carbide, and carbide with a reinforced head that prevents bit cracking and provides a longer life,the hardness is higher than the ordinary drill bit..
  • 【UNIQUE DESIGN】One drill bit replaces two drill bits (1 x glass & tile drill bit + 1 x Masonry drill bit), can easily drill holes on tile, concrete, brick, glass, ceramic, plastic, wood, etc.The U type slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly..
  • 【WIDE APPLICATIONS】Spear pointed design strong tungsten carbide tip can easily penetrate various material, suitable for masonry wall, cement wall, concrete, tile, wood, metal, stainless steel, aluminum alloy, wood, bubble brick, etc..
  • 【10-PIECE DRILL BIT SET】The package includes 10pcs 1/4 Inch (6mm) glass and tile drill bits and a plastic storage box, easy to carry..
  • 【NOTE】When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication..
Check Stock

COMOWARE Hammer Drills for Concrete, 1/2 In. Corded Drill, Hammer Drill, Variable Speed 0-3000RPM, Max 48000BPM, Hammer & Drill 2-in-1 Concrete Drill, 6.5 Amp Power Hammer Drills with 10 Masonry Bits

  • POWERFUL MOTOR & PROFESSIONAL DESIGN- Equipped with powerful 750w motor, COMOWARE corded hammer drill delivers up to 48,000 bpm to quickly drill through hard materials like concrete, stone, and brick. The 6.5 amp power hammer drill is designed with 5ft extension power cable which helps for wider operating space..
  • 2-IN-1 MULTI-FUNCTION - Dual-mode selector easily converts the hammer drill from rotation-only to hammer drilling. Hammer function provides greater impact up to 48,000 bpm, allowing the masonry drill bits deliver aggressive drilling performance on brick wall and concrete. Please note that this power hammer drill is not suitable for reinforced concrete walls. Drill mode is suitable for titanium bits or cobalt drill bits drilling on wood, plastic and ceramic tile..
  • PRECISE SPEED ADJUSTMENT & SAFE OPERATION - Variable-speed trigger with rotary dial allows you to control the drilling speed at 0 - 3000 RPM according to your needs. Use the rotary dial to set the speed, then press the trigger to start the drill at the selected speed. It helps the corded hammer drill generate accurate bit starting when removing fasteners or bound bits..
  • 1/2 IN. KEYED METAL CHUCK - This concrete drill is equipped with sturdy and durable metal chuck. The 1/2 in. thr....
Check Stock

Sabre Tools 1/4 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 5-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (1/4” x 6”, 5)

  • 1/4” x 4” x 6" Masonry hammer drill bits 5 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

Sabre Tools 3/16 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 10-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (3/16” x 6”, 10)

  • 3/16” x 4” x 6" Masonry hammer drill bits 10 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

Concrete Drill Bit Set 10PCS (3/16”-1/2”), Professional Masonry Drill Bits Tungsten Carbide Tip Work for Glass, Metal, Brick, Tile, Concrete, Plastic and Wood (10PCS-Concrete Drill Bit Set)

  • ✅【HIGH QUALITY DRILL BIT SET】 WildBossy masonry drill bit set, drill bit tip made of high-quality YG6X hard alloy, fully polished and rustproof, clean and sharp without burrs. This cement drill bits can easily penetrate various material (metal, brick, glass, ceramic tile, plastic, wood, etc.).
  • ✅【WONDERFUL DESIGN】Cross tip design, reduce resistance, faster speed.
  • The hexagonal handle makes the drill tighter and safer to use. When you pick up our concrete drill bit and go through the tile, it seems to feel like there's no obstruction..
  • ✅【FAST PENETRATION】The tile drill bits are suitable for most general drill, electric drill, hand drill and bench drill. The double U-type groove design and spiral handle design bring fast drilling dust remove..
  • ✅【SIZES OF MASONRY DRILL BITS】 Package includes 10 Pcs drill bit set: 3/16"×2, 1/4"×4, , 5/16"×2, 3/8.
Check Stock