Top Matco Fan Clutch Removal Tools

Prokomon 8PCS Pneumatic Fan Clutch Wrench, 43300 Fan Clutch Removal Tool Kit for Ford, GM, Chrysler and Jeep

  • ◇ Durable --- The wrench tool kit is made of sturdy steel, durable and strong, with strong resistance to corrosion and rust..
  • ◇ Specifications --- Fan clutch wrench 7/8", 32 mm, 36 mm, 40 mm, 47 mm, 1-7/8" and 2". Wrench tool for Ford 6.0L and 6.4L power-stroke diesel pickups.
  • ◇ Easy to Use --- Simply slide the tool into the air hammer to select the correct wrench size for the fan nut, give it a few taps with the air hammer, and the fan clutch will loosen. No need for any other special nailing tools. (Note: Air hammer not included).
  • ◇ Function --- Specially designed to help you easily disassemble and install the fan clutch when repairing the water pump or fan clutch. (Please confirm the size you need before purchase).
  • ◇ Applications --- Compatible for Ford, Chrysler, GM and Jeep.
  • Compatible for 4.3L, 5.0L, 5.7L GM pick up (van, mini-van, or SUV)..
Check Stock

DCT Dual Clutch Transmission Tools High Hardness&Wear-resistant Transmission Clutch Tool with Toolbox Compatible for F.ord F.ocus F.iesta V.olvo Clutch Removal Tool for Reinstall DPS6-DCT F1FZ-7B546-B

  • 【Dual Clutch Transmission Removal Tool&Reinstallation】This clutch transmission removal tool can be used to remove and install the dual clutch assembly. You can reuse the removed/previously installed dual clutch assembly without purchasing a new DCT clutch assembly. The clutch tool will resprings/re-trips the springs on the clutch so that you can reinstall a good used clutch assembly..
  • 【Compatible For F.ord & V.olvo Clutch Tool】Dual clutch transmission tools compatible for F.ord V.olvo DPS6 dry type dual clutch. Part Number: F1FZ-7B546-B. Compatible with F.iesta 2011-2019.
  • 【Made Of High Carbon Steel & High Hardness & Wear-resistant】The clutch tools are made of high carbon steel, which is of high hardness and wear resistance, providing you with long-term service..
  • 【Easy-carry & Well-organized Toolbox】Engine timing tool kit comes with a heavy-duty blow-molded plastic toolbox, which can be transported conveniently and quickly, and is safer to store and easier to organize..
Check Stock

3PCS Clutch Drive Belt Removal Tool, Clutch Spreader Drive Ranger Belt Removal Tool, Belt Change Tools, for Polaris RZR RZR-4 XP Turbo RS1 Ranger XP 1000 Replace 2875911

  • Compatible: The Clutch Drive Belt Removal Tool can fit Polaris 2016-2019 RZR XP Turbo / 2016-2019 RZR-4 XP Turbo / 2018-2019 Ranger XP 1000 / 2019 Ranger Crew XP 1000 / 2018-2019 RZR RS1..
  • Function: The Clutch Drive Belt Removal Tool helps to prevent damage to belt or pulley during removal or installation..
  • Material: The Belt Change Tools are made of high quality metal, very durable and sturdy..
  • Package Included: 3PCS Yellow Clutch Drive Belt Removal Tool in total..
Check Stock

43300 Pneumatic Fan Clutch Wrench Kit Removal Tool Kit Compatible with Ford/GM/Chrysler/Jeep

  • Compatible with Ford, GM, Chrysler & Jeep, fit for 4.3L, 5.0L, or 5.7L GM pick up (van, mini-van, or SUV). (Please ensure correct size before purchase)..
  • Includes 7 driving wrench sizes: 7/8", 32mm, 36mm, 40mm thin, 47mm, 1-7/8", and 2" to fit Ford 6.0L and 6.4L Powerstroke diesel pickup..
  • Easy to use,simply slip the tool into the air hammer, select the correct wrench size for the fan nut, and a couple of pops of the air hammer will loosen the fan clutch. Easily removes and installs fan clutch when repairing water pump or fan clutch. No need for any other special pinning tools..
  • Made of durable 1/4" thick steel for high strength and durability, with great resistance to corrosion and rust..
  • Comes with a storage bag for easy carrying..
Check Stock

Prokomon 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit for BMW E34 E39 E36 E46 E90

  • DESIGN CONSIDERATIONS: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
  • DURABILITY: Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
  • COMPATIBILITY: The ARES Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to, the following applications: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, and S50B32..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 2-Piece Fan Clutch Wrench Set, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..
Check Stock

Powerbuilt Pilot Bearing Puller, Remove Bearings and Bushings, Foreign and Domestic Car Repair, Storage Case - 648619

  • Made to be the most reliable tools in the market today.
  • Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement.
  • Heavy duty puller with 1 1/2-Inch fingers for an extra deep reach.
  • Kit 8 includes 1-Piece for removal of pilot bearing and bushings from the flywheel during clutch replacement.
Check Stock

Schwaben 003466SCH01 Coolant Refill/Air Purge Tool

  • Lock it onto the waterpump face and use 32mm or 36 mm (both included) spanner to undo the nut..
  • Fan Clutch Holder fits BMW engine models : M10,M20 ,M30,M40, M44,M50,M52,M52TU,M54,M56,M60, M70,M73, S14, S38, S50B30, S50B32, S54..
  • When performing cooling jobs or any job that involves removal of the viscous fan, this tool will save you a lot of time..
Check Stock

Four Seasons 36895 Reversible Fan Kit

  • Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
  • Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
  • BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
  • BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
  • Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.
Check Stock

Huf Baolong Electronics (BH Sens) 433MHz Universal Sensor/OE Quality (must be programmed prior to install) with metal valve

  • Programmable - Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others..
  • Always up-to-date with the new programming function via the TPMS diagnostic tool.
  • Covers multiple applications with one OE equivalent sensor. With valve included..
  • Full WAL and PAL technology support for auto-locate..
Check Stock

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

  • Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
  • Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
  • The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
  • This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
  • The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check Stock

ZKTOOL 32mm&36mm Fan Clutch Nut Wrench Set Fit for BMW Ford GM, Chevrolet,Nut Water Hub Removal, Removing Holding Holder Clutch Tool,Water Pump Holder Removal Tool.

  • 【WIDE APPLICATION】 This SCITOO 2pc Water Pump Tool Suitable for various engines: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32..
  • 【EASY TO USE】 SCITOO Fan Clutch Nut Wrench Water Pump Holder Tool are manufactured to the OE specification for exactly fitment to lock nuts on the thermo-Viscous fans and hold the water pump pulley in place while loosening the radiator fan. Direct replacement, which can work smoothly, can help you save a lot of money..
  • 【QUALITY ASSURANCE】 Construct from high quality steel and have went through vehicle try-on testing to ensure the quality is qualified and durable, ensure long service life. Suitable for home use and professional mechanics..
  • 【PACKAGE INCLUDED】 Come with 1pc Fan Clutch Wrench, 1pc Fan Clutch Holder, plug and play..
  • 【IMPORTANT NOTE】 We provide 1 year warranty for you. When doing automotive maintenance always make sure all the tools are correctly used . Any question or problem, feel free to contact us..
Check Stock

Electric Engine Cooling Radiator Fan Clutch for 2002 2003 2004 2005 2006 2007 2008 2009 Trailblazer Chevy GMC Envoy L6 V8 Replace#3201

  • Electronic Electric Engine Cooling Fan Clutch Radiator Fan Clutch for 2002 2003 2004 2005 2006 2007 2008 2009 Chevy Trailblazer GMC Envoy.
  • For 2002 2003 2004 2005 2006 2007 2008 2009 Trailblazer Fan Clutch Replace#3201.
  • Engine Cooling Fan Clutch Radiator Fan Clutch for Chevy Trailblazer GMC Envoy L6 V8 4.2L 6L.
  • Meets OE standard quality and performance requirements..
  • Please CONFIRM FITMENT before purchase(Check Date Above), 1 Year WARRANTY !.
  • If not fit, we accept return, please keep the package clean and products in good condition.
Check Stock