Top Max Air Butterfly Valves

Milton S-690 1/4 FNPT Dual Head Air Chuck

DESIGNED/MANUFACTURED: To exacting standards. This is a Closed/Sealing-type air chuck for use on a compressed airline.
DUAL HEAD CHUCK: Makes tire valves more accessible with the two heads for easier access.
INFLATE: By hooking the closed head (w/valve) directly to an airline.
EASY ACCESS: To inner dual when valve is facing inward. Great for reaching into Dually trucks and other challenging angles.
MAX PSI: Maximum air pressure of 150 pounds per square inch. 1/4" female national pipe thread.

Inner Diameter: 10mm/0.39" Outer Diameter: 14mm/0.55".
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers..
Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
High quality copper washers are constructed to uphold strength and ultimate durability during tough operations..

Inner Diameter: 5mm/0.2" Outer Diameter: 9mm/0.35".
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers..
Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
High quality copper washers are constructed to uphold strength and ultimate durability during tough operations..

Inner Diameter: 8mm/0.32" Outer Diameter: 16mm/0.63".
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers..
Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
High quality copper washers are constructed to uphold strength and ultimate durability during tough operations..

This digital handheld manometers can measure the air pressure of the single pipe， or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems..
Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect..
12 Selectable Units of Measure (kPa, Psi, Kgfcm2, Ozin2, Bar, mbar, inHg, mmHg, InH2O, FtH2O, cmH2O, Pa) with function: Data Hold and Error Code - Response Time: 0.5 Sec..
Ehdis digital manometer has Dual Input that can test / measure the differential gas pressure with its provided twin input probes.Max / minimum record function.
Data save function, also has room temperature future..

Inner Diameter: 10mm/0.39" Outer Diameter: 14mm/0.55".
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers..
Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
High quality copper washers are constructed to uphold strength and ultimate durability during tough operations..

Hull Weight: 113 lbs. Capacity: 2 Person or 1200 lbs.
Length: 12'10" Beam: 4'8" Interior: 10'5" x 3'4".
Chambers: 4 (bow, floor, port Starboard) Air valves: 4 recessed one way.
Inflation Time: 15 Minutes - 10-15psi / Engine Capacity: 6 HP (15" Shaft, 75lbs Max Weight).
Seam: Quadruple Overlapped Superior Glued Seams / Double Layer 1000 Denier Reinforced.

Hull Weight: 113 lbs. Capacity: 2 Person or 1200 lbs.
Length: 12'10" Beam: 4'8" Interior: 10'5" x 3'4".
Chambers: 4 (bow, floor, port Starboard) Air valves: 4 recessed one way.
Inflation Time: 15 Minutes - 10-15psi / Engine Capacity: 6 HP (15" Shaft, 75lbs Max Weight).
Seam: Quadruple Overlapped Superior Glued Seams / Double Layer 1000 Denier Reinforced.

1/8 inch NPT female side hole threaded with 8mm quick plug and gauge.
G1/2-14 ( 0.825-14NGO ) female bottom threaded, screws onto any depressed pin valves.
Heavy duty aluminum construction, lightweight and durable design, corrosion resistant..
Paintball UFA fill adapter On/Off, perfect for remote systems or CO2 fill stations, release air from cylinders..

Exterior: 15'6" x 30" / Interior: 14'10" x 21" / Deflated: 37" x 23" x 10" / Interior Tube: 10" High x 4" Thick.
Weight: 45 Lbs. / Capacity: 2 Person (600 lbs.) + Gear (150 lbs.) = 750 max total lbs..
Material: Fully Constructed with Drop Stitch Technology-1000 Denier Reinforced PVC / Seam: Overlap.
Air Valves: 3 Recessed One Way / Adjustable Flexbrace.

AIR LINE TUBING - Outer diameter: 1/4 inch.
Length: 20 feet. The red air line tubing is made of nylon that is light and flexible. The max working....
EASY INSTALLATION - All the fittings are designed with PTC (push-to-connect). Hose installation is done by pushing the tube into the hole until the....
UNIOn TEE - It can be used to tie a set of air springs together for a single path installation. Push-to-Connect fitting for easy connection to air....
INFLATION VALVE - Two schrader valves are made of brass that is for maximum strength and durability. Designed to inflate or deflate manually your air....
ELBOW FITTINGS - The elbow fittings are connected with 1/4” air tube. One head is 360 swivel 1/4” FNPT thread and the other head is 1/4” push to....