Top Maximum Power Output

Generic Compatible Replacement AC Adapter Charger for LEAPSTER 2 LMAX L MAX DIDJ Charger Power Cord Mains PSU

  • Wide Compatibility: AC Adapter fit for LeapPad Glo, LeapPad2 Power, LeapPad2 Custom, LeapPad2, Leapster, LeapPad1, Leapster Explorer, LeapsterGS, Leapster2, Leapster L-max, Leapster-Tv..
  • Lput voltage: 100-240 VAC, 50/60 Hz , Output : 9V 1.5A, Maximum power: 13.5W, Power Cord length: 300cm ( 6.6ft ), DC plug size: 5.5x2.1mm（Center positive).
  • Power charger output current: 9v 0-1.5a (Will adjust the output current according to different devices (maximum 1.5A), so it is a perfect substitute for all 9Volt 100mA / -1500mA power supplies).
  • Durable：Made of the finest materials, the life of the power supply is longer than other products, More energy-saving and power-saving, saving of electricity bill than ordinary equipment. making it a durable and affordable product..
  • You will get: 1 power adapter, if the product is not satisfied 30 days refund service and 12 months warranty.
Check Stock

WOWOONE 30 Types 74HCxx Series Logic IC Assortment Kit, Logic Gates, Integrated Circuits Assortment Kit, TTL, High-Speed Si-Gate CMOS IC, Low-Power

  • Input point X element x0-x7, DC24 input, low level valid. X0-5 is the high-speed counting input port (default: 12K,100KHZ optional)..
  • Output analog voltage WR3A instruction, corresponding to the value 0-4095. Intermediate relay M: M0-M3071, the power loss preservation range can be set..
  • The maximum speed current is 1A. External load common terminating + 24, the other end received the PLC output port Y..
  • Y0-Y5 is optional relay or transistor output, relay output current 5A. The transistor output DC24V, the current maximum 1A..
  • 100Ms timer: t0-t199, accumulative power off save t184-t199.
  • 10Ms timer: T200-T249, accumulative power off saving T246-T249.
  • 1Ms timer: T250-T383, where T250-255 is cumulative.
  • 16-bit counter: C0-C199, power off to save C100-199.
  • 32-bit counter: C200-C219, power off to save C220-C234.
Check Stock

Reisong - BOYUURANGE A20 Hi-Fi Intergrated Amplifier KT88 Tube Single-end Class A 4ND VU Meter

  • The new power amplifier 0.35 cores do to ensure stable power supply..
  • Output power, maximum output power of 8W+8W..
  • Output amplifier uses no big loop feedback technology to ensure high sound reduction, powerful.
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • ...V 2.5A power supply★ The document link is obtained in the product description.
  • The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
  • The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The ....
Check Stock

Alpine PDX-V9, 5-Channel Extreme Power Density Digital Amplifier w/Alpine RUX-KNOB.2 Remote Bass Level Control

  • MD 12000.1 – 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS..
  • It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power @ 12.6 VDC – 0.5 OHM: 12,000W RMS @ 12.6 VDC – 1 OHM: 7,200W RMS.
  • Input Sensitivity 220mV, Signal to Noise Ratio >95dB, Frequency Response 10 Hz ~5 kHz (-3dB), Crossover high pass (HPF) 10 Hz ~90 Hz (-12dB/8th) Variable, Crossover low pass (LPF) 90 Hz ~5 kHz (-12dB/8th) Variable, Bass Boost Freq.: 35 Hz ~55 Hz.
  • Boost: 0 ~10dB, Efficiency 79%, Input Impedance 15K ohms, Output Impedance 0,5 ohm, Protection system Output Short circuit, Output Short circuit in relation to the GND, Low Impedance Protection / High or Low voltage Protection / Thermal protection.
  • Maximum Power Supply Voltage 16VDC, Consumption at rest 3.6A, Maximum music consumption 602.5A, Maximum consumption in sinusoidal signal 1,205A, Dimensions (H x W x D) 8.976 x 2.755 x 21.653 inches (228 x 70 x 550mm), Weight 17.526 lbs (7.95 kg).
Check Stock

5PCS USB-C PD QC 5V 9V 12V 15V 20V DC Fixed Voltage Power Trigger Module 5A Type-C Male Input (Default 12V), White

  • This module can output 5V 9V 12V 15V 20V, please refer to the second and third pictures for modification, the required resistors have been placed in the package..
  • Support PD QC protocol .Maximum output current 5A, maximum output power 100W.
  • Note Before purchasing, please confirm whether your power supply supports the voltage value you want.
  • Not all USB-C power supplies can support all voltages , If the power supply does not support the requested voltage, the next lowest voltage will be provided.
  • Package : 5 PCS 9V Power Trigger Module. 5 PCS White Housing ,The resistance value of each 10 PCS is 1K, 5.1K, 24K, 51K packaged as 0603 resistors.
Check Stock

Electric Skateboards,1800W Dual Motors with Remote Control,Top Speed 25MPH,17 Miles Range, Longboard with Belt Drive System,3 Speeds Adjustment,Electric Skateboard for Adults and Youth

  • [High power output] - Dual drive motor design, each motor provides the maximum output power of 900W. 1800W output power can make the Electric skateboard load up to 330 pounds, climb a 25 degree slope, and make the maximum speed reach 40KM/H（25mph）.
  • [High efficiency belt transmission system] - The rubber fiber belt can support higher speed and match higher output power, at the same time, The E-board belt transmission can reduce the transmission resistance and avoid the heat generation of gear friction of traditional electric longboardboard.
  • [Multifunctional - 2.4G wireless remote control] - E-skateboard remote provides travel and brake control, and supports forward and reverse, high, medium and low speed adjustment at the same time. In addition, the wireless remote control has the functions of signal strength display, E-skateboard power remaining display and low power display, making play more intuitive and convenient..
  • [Sufficient battery energy] - 30 Li-ion high-quality cells are used. According to the test, the effective capacity of the battery reaches 7.5AH. Li-ion battery provides long working time. The maximum driv....
Check Stock

GTD Audio 8 Channel Professional Audio Powered Mixer Power Amp DJ Amplifier, USB, EQ, Effect

  • 6000w output Maximum, 2000w output Average @ 4 ohms,.
  • 3000w output Maximum, 1000w output Average @ 8 ohms.
  • 8 channel, with onboard 16 type professional effect.
  • 8 mic/line channels with 48v phantom power for condenser microphone.
  • 3-band EQ on each channel and 7-band graphic EQ on the main.
Check Stock

JOYO D-SEED-II Multi Stereo Delay Pedal with Pedal Power Supply

  • Bundle includes: JOYO D-SEED-II Multi Stereo Delay Pedal & Power Supply. This bundle contains 2 items (may be shipped separately)..
  • D-SEED-II: Stereo input and Stereo output, 8 delay modes, supports a maximum of 2000ms delay time..
  • JOYO ZGP is capable of isolating the power supply's hum and noise completely from a normal 9V adapter..
  • It changes the normal daisy chain power supply into a real independent daisy chain output power supply..
  • It provides max 800mA working current and stable 9V output voltage,breaks the ground loop and offers independent output..
Check Stock

24/20-Pin ATX DC Power Supply Diagnostic/Breakout Board Module

  • 24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
  • Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
  • High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
  • Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
  • Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..
Check Stock

Kenwood KAC-HQR1004 Reference Series 1200W 4-Channel Car Amplifier

  • Number Of Channels: 4 – Channel Minimum Impedance Unbridged: 2 Ohm Minimum Impedance Bridged: 4 Ohm.
  • Bass/Gain Remote: Not Included Maximum Input Gauge Size: 4 Gauge Series : HQR (Kenwood) Built In Crossover: Full (AP).
  • Combined Rms Power Output: 540 RMS Combined Peak Power Output: 1000W Dimensions: 220 x 35 x 169.
  • Rms Output @ 4 Ohms : 100w × 4 Rms Output bridged @ 4 Ohms : 270W × 2.
  • Ultra Hi-Performance 4 Channel Amplifier Super-slim profile, big-time power High density construction & Cooling Fan Custom made capacitor Gold-plate Terminals.
Check Stock

Add On Power Adapter

  • Compatible to OEM Part Number: ADLX45NCC3A.
Check Stock