Top Mb 38 Pin Breakout - BuyWiseBest.com

MakerSpot Prototyping Board for Raspberry Pi 2 Pi 3 A+ B+ Pi4 v2.2 Soldered with Female Connectors with Pin Header Set in Extra Long & Short Length

348 holes of prototyping area, Full breakout of the 40-pin Pi Header.
Holes are connected in row and column groups.
Silkscreen marking for 40-pin Pi Header reference.
High quality HASL PCB finishing, D0.9mm drill holes and D1.9mm pad size.
Pin Headers set: 1 x extra long 40-pin (length: 12mm) stacking header, 1 x short 40-pin (length: 6mm) stacking header.

Different Capacity for Choice: 64GB 32GB 16GB 8GB Memory Stick highly extend your PSP memory capacity, no need to worry about your PSP run out of memory to download your favorite games.
High Speed: Read speed is approximately 50MB per second. Write speed with 4-bit parallel transfer is approximately 5MB per second or 40MB per second in the case of optimized compliant host device. Write speed with 8-bit parallel transfer is approximately 15MB per second or 120MB per second in the case of optimized compliant host device.
Compatibility: Sony Playstation PSP All Versions (not recommend to use it on digital cameras).
Interface: 10-pin serial memory stick interface & 4-pin parallel.

8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
2x20pin expansion pin header, pin height 10mm/0.39".
Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).

Easy to operate: Use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications.
There is a mark on the breakout board that can clearly identify the pin position, Breakout board is of excellent quality and adopts double-sided gold forming process.
The module is small in size and does not occupy other space. It is very convenient when making DIY circuits, and the wires can be easily inserted into the terminals.
Compatible with Raspberry Pi: This GPIO terminal block is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W.
Note: This project needs to be welded and assembled by yourself.

Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
Package Include:Standard 16Pin Male Plug x 1.

Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
NOTE: the item not include Arduino Uno module..

CZH-LABS Combo Package D'sub diagnostic test breakout boards, for industry and computer field diagnostic or test..
Package quantity: DB9 x1pcs, DB15 x1pcs, DB25 x1pcs, DB37 x1pcs..
Male and Female connectors for each board..
Clearly labeled with connector pin numbers..

...| Media Feeders: Bypass tray: 1 - 100 sheets Ý Input tray: 1 - 550 sheets Ý Output tray: 1 - 550 sheets| Max Media Capacity: 4400 sheets| Output Trays Capacity: 550 sheets| Monthly Duty Cycle (max): 350000 pages| Recommended Monthly Volume: 5000 -100000 pages.
Networking: Print server| Connections: 1 x USB 2.0 - 4 pin USB Type B Ý 1 x Gigabit LAN - RJ-45 Ý 1 x USB 2.0 host - 4 pin USB Type A| Consumables Included: 1 x toner cartridge (black) - up to 11000 pages ISO/IEC 19752 Ý 1 x photoconductor unit - up to 150000 pages at 5% coverage| EPEAT Compliant: EPEAT Silver| ENERGY STAR: Yes| Service & Support: Limited warranty - 1 year| Min Operating Temperature: 60.8 øF| Max Operating Temperature: 89.6 øF| Humidity Range Operating: 8 - 80%.

Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.

Box Contents - BFG NVIDIA GeForce 8800 GTS OC 512MB graphics card, Two DVI to VGA adapters, Dual 4 pin Molex to single 6 pin PCI Express power adapter, HDTV adapter dongle.