Top Measurement Pipe

1.5" Swimming Pool Filter Hose, 6FT for Above Ground Pools with Hose Clamp, PTFE Tape Swimming

  • ✿【1.5in Swimming Pool Filter Hose】--Swimming pool replacement hose, suitble for pools with 1.5" plumbing connections, also compatible with most swimming pool vacuums.
  • ✿【High Quality】--Spiral design of the water pipe, can make the water flow more smoothly, the material used to upgrade the ABS plastic material, so that the water pipe more durable, not easy to damage.
  • ✿【Excellent Replacement Pool Hose】--Excellent quality water pipes can better protect the pool equipment, not easy to break, burst and lead to potential damage to the equipment.
  • ✿【Essential Pool Hose】--The water hose is suitable for connecting pump and filter pump, easy to use when using it connect the connector of one end to the vacuum head and insert the other end of the pipe into the water inlet nozzle.
  • ✿【Package Includes】--2pc Hoses(6ft/72in/182.8cm), 2pc hose clamps, 2pc ptfe tapes. Manual measurement please allow 1-2cm error.
Check Stock

Digital Handheld Manometer HVAC Air Vacuum/ Gas Differential Pressure Gauge Meter Tester 11 Units with Backlight, ±13.78kPa ±2PSI, 1-2 Pipes Ventilation Air Condition System Measurement

  • Measures air pressure of the single pipe or differential pressure of 2 pipes. Has 11 selectable units of measurement kPa, psi, kgfcm2, ozin2, bar, mbar, inHg, mmHg, inH2O, ftH2O, cmH2O..
  • Best for measuring the ventilation and air condition systems. Widely used for gas measurement, calibration, and any troubleshooting of any gas pressure systems..
  • Max / minimum / Average reading record function.
  • Low battery display and Auto power off set up function.
  • Differential pressure measurement,Large LCD backlit dual display.
Check Stock

Digital Angle Gauge Level Box Angle Finder Digital Protractor Table,Saw Accessories with Magnetic Base Calculating for Carpentry/Building/Masonry/Automobile

  • 【Digital Angle Gauge】The Digital Angle Finder with 0 to 360° (4*90°) measuring range, is designed for measurement in calculated Industries, also....
  • 【High Accuracy】This digital angle finder with V-groove design on the measurement base, for better measurement on pipe, set Zero function at any....
  • 【Built-in Magnets】The level box with a powerful built-in magnet on the base secures the attachment to saw tables, fences, blades, and other....
  • 【Auto Power Off】Digital Protractor is operated by 2pcs AAA LR03 batteries(included) and can automatically Turn Off after 5 minutes of no....
  • 【LCD Display】the digital angle gauge's values can be clearly and easily Read on the LCD Display. Low battery indicates. Small and light, it's....
Check Stock

Eastman 48020 36-Inch Length Flexible Faucet Connector, Braided Stainless Steel Supply Hose Line, 1/2-inch FIP x 1/2-inch FIP

  • ✅QUALITY- Constructed of a heavy-duty non-toxic PVC core, a multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 braided stainless steel exterior to prevent kinking and crimping..
  • ✅BURST PROOF and NO LEAK- Designed to withstand a working pressure of 125 PSI and a burst pressure of 1500 PSI. Equipped with full-flow brass barbs, a rubber washer, and nickel-plated brass hex nuts to avoid water leakage. The working temperature ranges from 40-degrees Fahrenheit to 150-degrees Fahrenheit with a maximum of 180-degrees Fahrenheit..
  • ✅UNIVERSAL- Features a 1/2-inch female iron pipe x 1/2-inch female iron pipe connection..
  • ✅MEASUREMENT- The faucet connector measures 36 inches in length and is equipped with a 1/2 inch Female Iron Pipe (FIP) connection at each end..
  • ✅EASY INSTALLATION- The flexible connector allows for a quick and easy installation in tight spaces..
  • ✅SAFETY- UPC, CSA, and NSF approved. Lead-Free Compliant..
Check Stock

Rohn 25 Series 40' Basic Tower (25G)

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (5) 45G STANDARD 10' SECTION. 50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete.
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. *This kit is shipped via freight only, see below for more information*.
Check Stock

Fluke BC-7240 Battery Charger/Eliminator, For 75X Documenting Process Calibrator

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
  • Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
  • 12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
  • Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
  • CE mark indicates compliance with applicable EU directives.
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • 13 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section....
Check Stock

QWORK Car Hose Remover Pliers, Auto Fuel and Vacuum Line Tube Hose Remover, Separator Pliers Pipe Repairing Tool

  • Function: This Hose Remover Pliers can easily removes stubborn hoses on pumps,tanks, radiators,air cleaners, etc..
  • Suitable for: It is suitable for use with vacuum hoses or fuel lines that have a diameter measurement range from 5/32" to 1/2"..
  • Compatible Hoses: Compatible with a variety of difficult dis-assembly pipes such as trachea, power assisted tubing, heat radiating oil pipe, water pipe, etc..
  • High Quality: Made from premium steel, anti-corrosion, durable and not easy to break, for long term service..
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us, we will be here for you..
Check Stock

Rohn 25G Series 30' Basic Tower Kit

  • INCLUDES: (2) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *30' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 20' Basic Tower Kit

  • INCLUDES: (1) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *20' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree

  • V-groove Magnetic Base: This magnetic V-groove base of digital angle gauge can be firmly attach to ferrous metal surfaces like pipe, steel construction framing, metal fabrication. Rugged durable aluminum frame for precision leveling measurement.
  • Absolute & Relative Measurement: This digital protractor has absolute angle measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. Moreover, this magnetic level lets you check the relative angles between the surfaces.
  • High Accuracy: Accurate to the ±0.1° at 0° and 90°.
  • ±0.2° at other angles. Displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. With reading hold function, it is convenient to record by this level digital inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
  • Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
  • IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh ....
Check Stock

Portable, Progress Solar and Wind Powered Light Tower

  • Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock