Top Measuring Gauges

5 Pcs Thread Pitch Gauges Measure Tool Set,Stainless Steel Thread Gauges 3 Pcs 55 & 60 Degree Metric System Centre Gage + 51Pcs America SAE Type + 52 Pcs Metric & America SAE Type & British Whitworth

  • 【Clear Marking】 : There is a small hole at both ends, which is convenient for adjustment and disassembly with screws. You can easily rotate the thread pitch gauge blade where you press the tooth thread gauge. The numbers are clearly marked and easy to read..
  • 【Material】 : Screw gauge tool set is made of stainless steel and processed with chrome finish. Surface polished smooth, applying anti-rust oil to prevent rust.good resilience, elegant appearance..
  • 【Measuring Range】: 51 pcs America SAE type measuring range is 4-84.
  • 52 pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
  • 【Suitable Scenarioos】 : Thread pitch gauges set usually used to check whether the size of the mold, machine and mechanical thread is correct.
  • use thread gauges blades of different sizes to accurately measure internal and external threads.
  • center gauge is used to grind and position thread cutting tools on a lathe..
  • 【What You Get】: 1 x American SAE type pitch gauge 60°, 1 xBritish Whitworth metric system pitch gauge 55°, 2 x center gauge 60°, 1 x center gauge 55°..
Check Stock

UHARBOUR Glycerin Filled Vacuum Pressure Gauge, 2-1/2\ Clear dial,1/4\NPT Bottom Connection, Stainless Steel Case, Brass Movement, Dual Scales -30inHg/-1BAR-0

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.
Check Stock

Starrett S579GZ Self Centering Telescoping Gauge With 2 Telescoping Arms Set, 5/16\ - 2-1/8\ Range, 2-3/8\ Handle Length (4 Pieces)

  • Set of four telescoping gauges for measuring holes, slots, and recesses in woodworking, metalworking, machining, layout, and pattern-making applications.
  • Two spring-tensioned telescoping plungers for uniform contact pressure.
  • Self-centering handles are rigidly attached to contact plungers.
Check Stock

Vankcp Guitar Luthier Tools, 32 Blades Feeler Gauge, 9 Understring Radius Gauge, 4Pcs Notched Radius Gauge, 1Pcs String Action Gauge Ruler, 2 Fingerboard Guards for Guitar and Bass Setup

  • 32 Blades Feeler Gauge: Made of stainless steel, measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, It can measure the height of the pickup and strings, the unevenness of the fingerboard etc...
  • 9 Understring Radius Gauge: Set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, It can be applied to accurately measure fret board radius, good for Guitar and Bass Setup maintain and adjustment..
  • 4Pcs Notched Radius Gauge: Include 2 narrow radius gauges and 2 wide radius gauges in 7.25”, 9.5”, 10”, 12”, 14”, 15”, 16”, 20 ” radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off..
  • 2Pcs Fingerboard Guard: Two different sizes: Large: 3.2 '' * 0.9 '' Small: 3.2 '' * 0.5 '', Prevents scratching or damaging to guitar or bass fretboard when filing and polishing frets..
  • 1Pcs String Action Ruler: Size 3.5'' X 2'' (L * W), marked with metric and imperial scale respectively on 2 sides, etch printing on double sides, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
Check Stock

EANOSIC Setup Blocks Height Gauge Set, 7pcs Precision Aluminum Setup Bars for Router and Table Saw Accessories Woodworking Set Up, Bars Include Laser Engraved Size Markings

  • 5 piece height measuring devices of different sizes and 2 piece hole gauges, can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler..
  • COMBINATION SQUAR. Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly..
  • Set up gauge blocks are all 2-1/2 inches long, diameter of 2 pcs round block hole gauges respectively: 1/2" and 12mm, 5 pcs square block respectively: 1/2.
Check Stock

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-60 psi, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-5000 psi/kpa,2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

YZM Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 2-1/2\ Dial Display, -1.5% Accuracy, 1/4\ NPT Bottom Mount,Water Pressure Gauge. (0-150 psi)

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-300 psi/kpa,2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Center Back Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Starrett S167CHZ Combined 167AH And S167B Radius Gauges Inch Set With Holder, Satin Finish, 1/64\ - 1/2\ Range, 1/64\

  • Set of 25 radius gauges for measuring concave and convex surfaces in woodworking, metalworking, machining, layout, and pattern-making applications.
  • Each gauge has five measuring surfaces for concave or convex radii, and is stamped with the radius size for accurate sizing.
  • Range from 1/64 to 1/2" in 1/64" increments.
  • Stainless steel with satin finish provides durability and rust resistance.
  • Includes 4"/100mm gauge holder for measuring in narrow or constricted locations and a protective case for storage.
  • Each gage is clearly marked with its radius.
  • Each gage has five different gagine surfaces for both convex and concave radii.
  • All gages have precision finished radii with extra smooth, accurate edges.
Check Stock

SAE and Metric Bolt Gauges Check-a-Thread Nut Fastener Size Tool

  • ✿America SAE type measuring range: 4 - 84, Metric & America SAE Type & British Metric: 0.25 - 6.0mm, Imperial: 4G - 62G US: 8, 10, 11, 14, 19, 28.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿Thread pitch gauge is used to check whether the dimensions of molds, machines and mechanical threads are correct. Center gauges are used for grinding and positioning threaded cutting tools on lathes.
  • ✿Including: 3 x Center Gauge + 1Pc America SAE Type Gauge + 1Pc Metric and Imperial Gauge.
  • ✿Use for check the thread size, can be used for measuring the metric, imperial and American SAE type screw thread.
Check Stock