Top Mechanical Seals For All

Harris ProForce Energy Efficient EE Above Ground Pool Pumps (1 HP)

  • THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **.
  • Stainless steel 1.0 HP motor shaft is constructed with a reinforced thermoplastic body for longer life and durability, with carborundum and graphite mechanical seals and components.
  • INCLUDES a highly efficient capacitor (on top of the motor) that greatly increases pump efficiency by reducing motor amp and watt usage - saving you money on operating costs!.
  • Advanced engineering provides high efficiency and minimal noise.
  • 115 Volts, with union connections for both suction and discharge ports and a convenient drain plug. Meets or exceeds all CSA and ETL requirements.
Check Stock

Harris ProForce 2-Speed Above Ground Pool Pumps (1.5 HP)

  • THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **.
  • Stainless steel 1.0 HP motor shaft is constructed with a reinforced thermoplastic body for longer life and durability, with carborundum and graphite mechanical seals and components.
  • 2-speed control that operates at high and low speeds to provide increased efficiency and longer life - ideal for cartridge filters!.
  • Includes an easy-to-use digital control panel that monitors speeds and running times - conveniently mounted on top of the motor.
  • 115 Volts, with union connections for both suction and discharge ports and a convenient drain plug. Meets or exceeds all CSA and ETL requirements.
Check Stock

820pcs O Rings, O-Ring Assortment Kit, 18 Sizes Rubber Gasket Ring Kit, Nitrile Rubber Silicone Seal Ring Set with 2 Seal Removers for Plumbing, Faucet and Automotive Repair

  • 18 Common Sizes: There are 820pcs O rings in 18 common sizes, which are 30pcs of 3*1.5mm, 30pcs of 4.5*1mm, 40pcs of 5*1.9mm, 40pcs of 6*2mm, 40pcs of 7*2mm, 70pcs of 8*2mm, 70pcs of 9*2mm, 70pcs of 10*2mm, 70pcs of 12*3.1mm, 70pcs of 13*3.1mm, 50pcs of 14*3.1mm, 50pcs of 17*3.1mm, 50pcs of 18*3.1mm, 30pcs of 20*3.1mm, 30pcs of 22*3.5mm,30pcs of 24*3.1mm, 30pcs of 15*3.1mm,20pcs of 28*3.1mm..
  • Wide Application: This nitrile rubber metric o ring works great on hole seals, oil seals, water seals, guide rings, fixed seals and shaft seals. It can effectively prevent fuel, water pipes, mechanical, hydraulic and hydraulic systems from leaking.
  • High Temperature Corrosion Resistant Material: The sealing rings are made of high quality nitrile rubber. It has good resistance to oil, water, high temperature and high pressure resistance. Working temperature range is -40℃(-40℉) to +120 ℃(+248℉).
  • Practical Package: This o-ring assortment kit is stored in 24 grids according to the size, and you can easily choose the size you want..
  • Good Performance: The o-ring assortment kit has good compression, abrasion resistance and elongation. High adhesive content, high elasticity, no obvious chemical smell. Durable for long time use..
Check Stock

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

  • End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
  • Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
  • Natural rubber O-ring for excellent expansion and memory.
  • Plug is rated for 17 PSI or 40-ft of head pressure.
  • End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
  • Galvanized carriage bolt to prevent corrosion.
  • Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
  • Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
  • Plastic mechanical plugs are premium plugs designed to hold higher pressures.
Check Stock

PSS Shaft Seal for 1\ Shaft Diameter, PYI Inc

  • World leading dripless mechanical face seal for marine applications..
  • Ideal replacement for packing glands and lip seals in marine or industrial environments.
  • Highly durable, low maintenance and cost-effective solution..
  • Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved..
Check Stock

Ultra Durable K-GP1059291 Canister Flush Valve Seal Replacement part by Blue Stars - Exact Fit for Kohler toilets - Replaces 2475620 - PACK OF 2

  • MODEL NUMBER: K-GP1059291 Canister Flush Valve Seal – Pack of 2.
  • WIDE COMPATIBILITY: Our 3 3/8” canister seal replacement for all Kohler toilets is the best you can get for any toilet with no doubts of a misfit. The right replacement you need for your toilet and no regret on quality and fit.
  • NO FUTURE LEAKS: Top quality makes canister seals which prevent leaks in your toilet. No chemical attacks that can cause a tear. Certified by worldwide mechanical engineers as strong and withstands wear. Enjoy tight seals with no leaks and last longer.
  • EASY AND FAST TO INSTALL: No need to get a plumber to do these tasks. This DIY canister seal replacement takes you less time. When replacing you don’t remove the base of your toilet. K-GP1059291 Canister Seal for your leaks and smooth operation of toilets.
  • OUR PROMISE TO YOU: no noisy toilets anymore. You will enjoy your smooth toilet operation and with zero leaks — no embarrassment of your toilet losing pressure. We deliver OEM product. If our product doesn’t match the description, we offer a full refund. Enjoy risk-free purchases!!.
Check Stock

Cherne 270229 End of Pipe Gripper Mechanical Plug 2"

  • Easy to install with extra-large wing nut.
  • Inside of pipe seals inside pipe as far as needed.
Check Stock

Gates ACK060822 Belt Drive Kit

  • Original equipment matched idler and tensioner bearings.
  • Original equipment matched timing belt supplied by Mitsubishi.
  • Engine specific water pressure is achieved without excessive load to engine.
  • Aluminum die-cast technology allows for size and weight reduction.
  • Improved strength in body design and carbon ceramic mechanical seals assures leak prevention.
Check Stock

MECCANIXITY Bonded Sealing Washers G1/2 28.5x19x3.4mm Carbon Steel Nitrile Rubber Gasket, Pack of 10

  • The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal.
  • Nitrile Butadiene Rubber (NBR): Hardness: 60A.
  • Working Temperature Range: -20°C to 100°C (-4°F to 212°F).
  • Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
  • The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines.
Check Stock

All-Weather Mechanical Keyless Deadbolt Door Lock - Satin Chrome, #0409 by Anaconda

  • All Weather Operation - Neoprene seals ensure a water-tight installation. There are no electronics or batteries that can be damaged by inclimental weather..
  • Easy Open Design - The exterior knob and interior lever provide a smooth opening with minimal effort. Universal design complements any style..
  • Mechanical Entry - Keyless pad incorporates push-button code with numbers and letters. Also unlocks via standard keys..
  • Includes - Satin chrome finish with installation instructions and hardware, door templates, 2 keys and operating instructions--.
  • Universal - Deadbolt style fits both Left-Hand & Right-Hand door types up to 1-7/8" thick. 2-Position Backset Latch - 2-3/4" & 2-3/8..
Check Stock

DEKOPRO Submersible Water Pump 1/4 HP 1850GPH Thermoplastic Utility Pump Electric Portable Transfer Water Pump for Pool Tub Garden Pond Draining

  • 【HIGH DURABILITY】With the durable sealing structure and corrosion resistant thermoplastic, submersible pump is less prone to mechanical failure. The powerful motor and all electrical components are protected against water for maximum life and reliability..
  • 【POWERFUL PUMP】 1/4 HP motor. Max Lift: 27 Feet.
  • 1981 Gallon Per Hour rating tackles any draining job at a fraction of the time. This submersible water pump easily passes solids up to 1/8" in diameter. GREAT for flooded area, swimming pools, cellars or garden pond..
  • 【UPGRADED HIGHLIGHT】Equipped with two skeleton oil seals and one mechanical seal, which is more reliable. This submersible pump impeller blade also features a highly corrosion-resistant impeller that automatically adjusts to speed and fluid viscosity to ensure a long service life..
  • 【PROFESSIONAL ADAPTER】With 3/4" garden hose adapter. 1-1/4" NPT discharge, you can use different sizes of hoses depending on the flow. Features a removable bottom screen that filters debris, protects the pump from damage, and removes water to 1/5" of the surface..
Check Stock

ShinMaywa 50CR2.25S Norus Stainless Steel Submersible Pump, 1/3 Horsepower

  • 4020 gph at 5' head max - 480 gph at 25'.
Check Stock