Top Medium pressure Grooved Piping Systems

SUPPLY GIANT 6I45 Flexible PVC Coupling with Stainless Steel Clamps, 1-1/4, Black

  • Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping.
  • Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,.
  • May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors.
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use.
  • Each Rubber Fitting is marked with part number, size, and certifications.
Check Stock

EVERCONNECT 4830 Flexible PVC Reducing Rubber Coupling with Stainless Steel Clamps, 2" x 1-1/4, Black

  • Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping.
  • Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,.
  • May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors.
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use.
  • Each Rubber Fitting is marked with part number, size, and certifications.
Check Stock

SUPPLY GIANT 6I53 Flexible PVC Reducing Coupling with Stainless Steel Clamps, 2 x 1-1/2, Black

  • Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping.
  • Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,.
  • May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors.
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use.
  • Each Rubber Fitting is marked with part number, size, and certifications.
Check Stock

Supply Giant 3942x2 Flexible Pvc PipeCap with Stainless Steel Clamps 2 inch Black (pack of 2)

  • PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
  • Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
  • May be used for non-pressure drain, waste, and vent (dev.) piping systems and sewer systems indoors and outdoors.
  • Conforms to CSA B602, certified and UPC approved, rated for underground use.
  • Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check Stock

Trac Ecological 1245-DC Port-O-Flush Jr. - 12 VDC

  • Provides system flushing portability and versatility while still efficiently handling small to medium size engines, heat exchangers, and air conditioning and refrigeration systems.
  • For flushing projects ranging from 1-20 gallons, engines Up To 750 HP, small air conditioning and refrigeration systems with piping up to 1. 5" ID.
  • Includes accessories to fit many onboard systems without additional fittings.
  • Designed specifically for use with TRAC Ecological cleaning solutions.
Check Stock

PannySewCraft Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More!

  • ►High Quality Premium Sewing Feet From TFBOY.
  • ►Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • ►Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • ► Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • ► Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

VANICE Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • High Quality Premium Sewing Feet From VANICE.
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm..
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adapter), Babylock, Euro-Pro, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines.
Check Stock

Brio B.P.A. Free 5 Gallon Plastic Crown Cap Reusable Water Bottle Container

  • This non-portable water expansion tank is for closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief sett of the relief valve.
  • The carbon steel tank is pre-charged at 12 psi, has a 4.5 gallon volume, and features a durable expansion membrane preventing minimizes loss of the air change and ensures long and trouble-free life for the system.
  • Made of carbon steel with epoxy finish, mounts to supply piping, with 1/2 inch MNPT system connection and .302-32 inch charging valve connection for on-site charging of the tank.
  • Maximum pressure 60 psi and can be used in residential or commercial hydronic heating systems.
  • Use in tandem with your hot water heater to absorb increased water volume ensuring long and trouble-free life for the system.
Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

  • 【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
  • 【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
  • 【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..
Check Stock

Midline Valve PVC Union Coupling Pipe Fitting 2'' Solvent Connections White Plastic (597DV200)

  • ✔LEAK-FREE: Features Secure, Leak-Free Solvent Connections.
  • ✔PIPE CONNECTOR: Connects 2 Solvent Pipes of Equal Diameter Within Your Cold Water Systems.
  • ✔IDEAL FOR JOINING PIPES IN: Landscaping Sprinklers, Pools, Water Park, Aquarium, ETC..
  • ✔PVC PIPING: PVC Piping Systems Feature Improved Performance, Increased Safety, and Better Rust and Corrosion Resistance when Compared with Steel Piping Systems.
Check Stock

Midline Valve PVC Inline Check Valve for Backflow Prevention 1-1/4 Solvent Connections White Plastic 4I2T114

  • ✔LEAK-FREE: Features Secure, Leak-Free Solvent Connections.
  • ✔STAINLESS STEEL SPRING LOADED CHECK: Prevents Backflow in Your Cold Water Pipes.
  • ✔SPECIFICATIONS: Cracking Pressure @ .5 PSI.
  • ✔IDEAL FOR FLOW CONTROL IN: Landscaping Sprinklers, Pools, Water Park, Aquarium, ETC. Can Be Installed Vertically and Horizontally..
  • ✔PVC PIPING: PVC Piping Systems Feature Improved Performance, Increased Safety, and Better Rust and Corrosion Resistance when Compared with Steel....
Check Stock