Top Melamine Plywood

Makita SH02R1 12V Max CXT Lithium-Ion Cordless Circular Saw Kit, 3-3/8"

  • Makita-built motor delivers 1,500 RPM for faster cutting.
  • 3-3/8″ blade delivers a maximum cutting depth of 1″ for a wide range of cutting applications.
  • Adjustable cutting depth from 1″ at 90Degree and 5/8″ at 45Degree.
  • Tilting base for bevel cuts from 0Degree – 45Degree.
  • Cuts plywood, MDF, pegboard, particleboard, melamine, drywall and more.
Check Stock

Edge Supply White Melamine 3/4 inch X 25 ft roll of White Edge Banding – Pre-glued Flexible Edging – Easy Application Iron-On Edging for Cabinet Repairs, Furniture Restoration

  • WHITE MELAMINE EDGE BANDING – this roll of white edge banding is of superior quality and pre-glued with strong adhesive. Perfect for repairing or finishing off cabinets, DIY projects, shelving or repairing furniture, this edging will give a smooth, neat finish to your projects.
  • SUPERIOR QUALITY MELAMINE EDGE BANDING – made to last, this white roll of cabinet edge banding is durable and supplies a high-quality finish. Pre-glued, our edge banding is ready for your application and easy to use without snagging or splitting.
  • PRE-GLUED FLEXIBLE EDGE BANDING – pre-glued with top-quality, hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the banding strip for a strong, permanent bond.
  • EASY TO APPLY – this white edge banding is very easy to apply by simply placing it onto your item, then applying firm, hot heat with a household iron. Supplied tightly rolled up, our melamine edging is easy to hold for accuracy. An edge banding machine is of course suitable to use for application if you have one in your toolkit.
  • VERSATILE FOR A RANGE OF SURFACES – trimming edge banding is used to enhance and supply a complete look to your shelving and cabinetry. You can use this....
Check Stock

Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade for Wood, 12 inch (4 Pack)

  • 12" diameter / 100 ASFG / 1" arbor / .098" kerf.
  • Ultra thin kerf enables portable job site saws to perform to the level of workshop stationary saws.
  • TiCo Hi-Density carbide specifically designed for each application to increase performance.
  • Shear-face grind design delivers effortless cuts with reduced amp draw on tools.
  • Ideal for cutting fine molding, veneered plywood, melamine and more.
Check Stock

Displays2go 36 Gallon Restaurant Fast Food Trash Bin Receptacle with Door, Tray Holder (LCKDPZTRBK)

  • 36 gallon trash bin is perfect for use in a cafeteria, restaurant, dining hall, and for fast food.
  • Swing open door has hinges and a “thank you” message.
  • Open bottom door to insert a 36 gallon waste basket liner (sold separately).
  • Top shelf holds cafeteria trays up to 12″W x 12″L.Measures 46.3″ tall.
Check Stock

GSCIT Club Black Edge Banding, 1/2 inch x 25ft Melamine Edge Banding with Hot Melt Adhesive Pre-glued Edge Banding Flexible Edging for Plywood Cabinet Furniture

  • √【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding, which can GUARANTEE THE ORIGINAL QUALITY AND CUSTOMER SERVICE..
  • √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice..
  • √【UPGRADE DESIGN】- The size of Edge Banding is 1/2 inch x 25ft, and the thickness is 0.3mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.3mm thickness can let you easy to do..
  • √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it..
Check Stock

GSCIT Club Melamine Edge Banding, 2 inch x 50ft White Edge Banding with Hot Melt Adhesive Pre-glued Cabinet Edge Banding Flexible White Veneer Edging for Plywood Furniture Table

  • √【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding, which can GUARANTEE THE ORIGINAL QUALITY AND CUSTOMER SERVICE..
  • √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice..
  • √【UPGRADE DESIGN】- The size of Edge Banding is 2 inch x 50ft, and the thickness is 0.3mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.3mm thickness can let you easy to do..
  • √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it..
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 10-Inch, 60T (14074)

  • Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life..
  • 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life. The aggressive hook angle cuts fast..
  • Blade is precision-tensioned and balanced for optimal performance with miter and table saws where smooth finish and accurate cuts are critical..
  • 60 tooth count blades give balanced performance, delivering smooth cuts to plywood or melamine, with enough strength to cut framing lumber quickly..
Check Stock

GSCIT Club Melamine Edge Banding, 3/4 inch x 25ft White Edge Banding with Hot Melt Adhesive Pre-glued Cabinet Edge Banding Flexible White Veneer Edging for Plywood Furniture Table

  • √【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding, which can GUARANTEE THE ORIGINAL QUALITY AND CUSTOMER SERVICE..
  • √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice..
  • √【UPGRADE DESIGN】- The size of Edge Banding is 3/4 inch x 25ft, and the thickness is 0.3mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.3mm thickness can let you easy to do..
  • √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it..
Check Stock

CMT 255.096.12 ITK Industrial Fine Finish Saw Blade, 12-Inch x 96 Teeth 40° ATB Grind with 1-Inch Bore

  • For fine finish crosscuts. Glass-smooth finish on your miter cuts..
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws..
  • 0.110 kerf thickness, 0.087 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 255.080.10 ITK Industrial Fine Finish Saw Blade, 10-Inch x 80 Teeth 40° ATB Grind with 5/8-Inch Bore

  • For fine finish crosscuts. Glass-smooth finish on your miter cuts..
  • Cut solid wood, melamine, laminates, plywood, chipboard. Use on radial arm/miter saws, table saws..
  • 0.098 kerf thickness, 0.071 plate thickness, 5° Hook Angle, 40° Alternate Teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Accusize Industrial Tools Double Flute Extra Long Straight Carbide Tipped Router Bit, 1/2'' Diameter, 3'' Depth, 1/2'' Shank, 4.7'' Oal, 0021-0828

  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers..
  • Cuts all composite materials, softwoods, plywood, hardwoods, glass fiber, and plastic, Especially for hipboard(melamine board), glass fiber reinforced plastics(carbon fiber material), MDF, etc..
  • Carbide tipped double flute straight bits are designed to provide excellent smoothness of cut and balanced cutting with minimal vibration..
Check Stock

CMT P07060 ITK Plus Ultra Finish Saw Blade, 7-1/4 x 60 Teeth, 10° ATB+Shear with 5/8-Inch003c003e bore

  • For crosscuts. Excellent cut with perfect finish on two-sided melamine, wood and plywood..
  • To be used on portable and cordless circular saws..
  • 0.069 kerf thickness, 0.043 plate thickness, 5° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock