Top Melt Pressure Transmitter

Fluke - FLUKE-561 561 HVAC Pro Infrared Thermometer, -40 to +1022 Degree F Range

  • E1 compliant, housing material: stainless steel 316L / 1.4404 FPM (Viton) PA EPDM/X (Santoprene).
  • Analog output, relative pressure, liquids and gases.
Check Stock

Pressure and Vacuum Hand Pump Calibrator Pressure and Vacuum Gauges Alongwith Pump for Calibration Labs and Field Calibrations Model AI-DP1-2200

  • Measuring Parameters: Pressure and Vacuum.
  • Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar) | Master Gauge ( Vacuum & Pressure) Range: -1 to 25 Bar.
  • Material Of Construction: Aluminium and Stainless Steel | Weight Approx. 1.5 Kgs..
  • Supply Scope: 1 Unit of Calibrator, 1 Unit of Master Gauge (Range: -1 to 25 Bar), 3 Nos Reducers (1/4", 1/2", 3/4"), Instruction Manual and....
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Check Stock

Front Lace Wig Instruction Video (Janet Collection)

  • A Must-Have Bands for wigs!! This elastic bands are used to melt your lace, Lays Down Edges and keeping baby hair in place so your wigs can look as natural as possible..
  • Features a velcro strap which makes it easy to adjust the tightness,No need to tie knots, super easy and comfortable to Use.
  • You can also wear our melting band when sleep, work out or take a shower to prevent wig from slip off and lace from moisture..
  • Made of ultra-fine polyester fiber and high elastic latex, so it is super soft and stretchy to use.Allows enough pressure to press the lace into the scalp. It is effective on both glued and glue-less installs/wigs..
  • Easy to Apply: You can simply apply the lace melt band after glue your wig down, wait for it to set in your style for 5-10 minutes and then remove the band slowly from the hairline.
  • ❤Tip for a perfect lace melt: To avoid the glue, lace spray or gel turning white and sticking to the band, please wait for your glue to dry majority of the way and then apply the lace melting band, you will get a perfect install and the lace will melt into the scalp..
  • Size: width: 3.5 cm, Length: 22.5 inch. 4 PCS for each pack.
Check Stock

Hand Operated Pressure and Vacuum Pump Calibrator Only Hand Pump for Calibration Labs Field Calibration and Pressure Transmitter Calibration Model AI-DP1-2200

  • Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Model: Hand operated.
  • Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar).
  • Weight Approx. 1.5 Kgs. | Material Of Construction: Aluminium and Stainless Steel |.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4").
  • Applications: Field Calibration, Calibration Labs, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Check Stock

Tips to Choose Lace Front Human Hair Wigs

  • A Must-Have Bands for wigs!! This elastic bands are used to melt your lace, Lays Down Edges and keeping baby hair in place so your wigs can look as natural as possible..
  • Features a velcro strap which makes it easy to adjust the tightness,No need to tie knots, super easy and comfortable to Use.
  • You can also wear our melting band when sleep, work out or take a shower to prevent wig from slip off and lace from moisture..
  • Made of ultra-fine polyester fiber and high elastic latex, so it is super soft and stretchy to use.Allows enough pressure to press the lace into the scalp. It is effective on both glued and glue-less installs/wigs..
  • Easy to Apply: You can simply apply the lace melt band after glue your wig down, wait for it to set in your style for 5-10 minutes and then remove the band slowly from the hairline.
  • ❤Tip for a perfect lace melt: To avoid the glue, lace spray or gel turning white and sticking to the band, please wait for your glue to dry majority of the way and then apply the lace melting band, you will get a perfect install and the lace will melt into the scalp..
  • Size: width: 3.5 cm, Length: 22.5 inch. 4 PCS for each pack.
Check Stock

GasOne 50200+2109 Gas ONE High Pressure Cast-Iron Round Burner Head with Brass Fitting O, Black

  • Includes - cast iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - cast iron will not melt easily compared to aluminum construction.
Check Stock

AUTEX 150 Psi Pressure Transducer/Sender/Sensor 150/200 Psi Stainless Steel 1/8”-27 NPT Pressure Transducer Sensor Compatible With Oil Fuel Air Water

  • 100% brand new Pressure transducer/sender/sensor 150 psi stainless steel for oil,fuel,air,water.
  • 150 psi Pressure transducer/sender/sensor/Transmitter....
  • Output: 0.5V–4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 150 psi outputs 4.5V.
  • Pressure Medium:The gas and liquid which is compatible with 316L stainless steel / Electromagnetism Compatibility:EN50081-1.
  • Package include: 1 pcs x150 psi pressure transducer.
Check Stock

allsun Pro Ultrasonic Leak Detector& Transmitter Automotive Noise Finder Electronic Stethoscope Machine Noise Monitor 36-44KHz Air Gas Water Dust Leak Pressure Vacuum Diagnose Tool

  • 【ULTRASONIC TECHNOLOGY】Ultrasonic Leak Detector& Transmitter uses ultrasonic sensing technology and features small size and light weight. It is reliable and easy to use and is a practical,portable tool..
  • 【WORKING PRINCEPLE】Automotive Noise Finder,turbulence created by gas or air forced through a small office generates ultrasoncic sound. Ultrasonic sound occurs when the atmosphere leaks into a vacuum vessel or when a pressure vessel leaks to the outside atmosphere..
  • 【FREQUENCY】Electronic Stethoscope, ultrasonic sound's frequency is related to the size of the orifice which ultrasonic sound passes through, but usually the frequency is about 40kHz. Frequency Response: 36kHz-44kHz..
  • 【WIDELY APPLICATION】Machine Noise Monitor, machine Abnormal Noise Detect.
  • By using this instrument, you can quickly and accurately locate leaks in any pressure and vacuum system. Suitable for detecting cracks of pipes, valves,oil tank and other sealed compartment..
  • 【WHAT YOU GET】Air leak detector package includes, Leak detector.
Check Stock

GasOne 50250+2109 Gas ONE High Pressure Cast-Iron Burner Head with Brass Fitting Orifice

  • Includes - Cast Iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - Cast Iron will not melt easily compared to aluminum construction.
  • Note: Image 3 accessories: Those parts come pre-installed for customer’s conveniences.
Check Stock

Agco 79017915 Parts Multi Purpose Molly III Grease 14 Ounce Tubes Pack of 10, Black, 14 Ounces

  • Non-melt grease that will not melt at any temperature.
  • Contains the technical fine grade Molybdenum Disulfide (Moly Powder).
  • Optimum performance range is -30°F to 500°F (-34°C to 260°C).
  • Withstands up to 500,000 pounds per square inch of pressure.
  • Contains SWEPCO's proprietary anti-friction and anti-wear additive, LUBIUM.
Check Stock

AUTEX Pressure Transducer Sensor 100 Psi Pressure Sender 316 Stainless Steel Oil Pressure Transmitter 1/8" -27 NPT For Oil Fuel Air Water Pressure

  • 100% new pressure transducer /pressure Sender/ Pressure Transmitter, Our material is using top of line 316 stainless steel (not 304)and high temperature auto-graded plastic..
  • Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
  • Pressure Medium:The gas and liquid which is compatible with 316L stainless steel.
  • Electromagnetism Compatibility :EN50081-1.
  • Wiring connector: water sealed quick disconnect.Mating connector and wire harness (pigtail) is included.
Check Stock

LEFOO T2000 0-200PSI with 1 Meter Cable Fuel Pressure Transducer Sender Sensor 316 Stainless Steel Oil Pressure Transmitter 1/8\ NPT Thread Pressure Transducer for Oil Fuel Air Water Diesel Gas

  • 100% new pressure transducer /pressure Sender/ Pressure Transmitter, Our material is using top of line 316 stainless steel (not 304)and high temperature auto-graded plastic.It's an advance pressure transducer than traditional mechanical pressure transducer,anti-interference, high stability..
  • Model: T2000 Packard. Pressure Range:0~200psi. Electrical connection:Packard with 1 meter cable.Overload Pressure:1.5 times of full scales. Burst Pressure:3 times of full scales..
  • Accuracy:±1%F.S. Output:0.5-4.5V. Power Supply:10-30VDC. Pressure Connection: 1/8 NPT male Connection.Working Temperature:-40 ~ 100°C.Response Time:10ms..
  • Medium:Gas,Water,Oil, diesel,air. Works for oil, fuel, diesel, gas, water, air pressure, can be used in oil tank, gas tank, diesel tank etc.
  • We have a strong customer service team, welcome to contact us if you have any question.
Check Stock