Top Metal Locating Tool

Gerber Randy Newberg DTS Hunting Knife with Sheath

  • Features serrated knife blade tendon tool used to cut tough-to-reach tendons deep in joints.
  • Folding knife has oversized 440C recurved primary blade for excellent meat processing.
  • Barrel construction and dual steel liner allows for easy cleaning and enhanced durability.
  • Retroreflective material makes night locating easy while hunting, camping, or fishing.
  • Randy Newberg Gerber Knife has ambidextrous design and compact sheath for transport.
Check Stock

uxcell 4 x 30mm(Approx 5/32') Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves 15Pcs

  • 【Size】 Diameter:4mm/0.16" and Tolerance:+0.0008"/-0.0008".
  • Height:30mm/1.18" and Tolerance:+0.02"/-0.02".
  • 【Material】: These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life..
  • 【Easy to install】: This cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase..
  • 【Application】: Mainly used for wooden products, double bed, bookshelf, shelf, outdoor shade shed, cabinet partition, etc..
  • metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application.
  • 【Uxcell】: Our group comprises factories in Asia that manufacture OEM and aftermarket consumer products..
Check Stock

SuperEye S300 Underwater Pinpointer Metal Detector, Waterproof Pinpointer

  • Passed TUV IP68 for full Waterproof to TEN meters deeper than others. It is more visible with orange color when it works underwater..
  • 360 degrees detection and sensitivity reach 4 cm than our standard item.It is more more accurate to determines the position of the metal object ..
  • There are four level light colors showing how nearest the metal objects are. It will glow red light first, and the ranking is red, green, blue, white. Also the pinpointer approaches metal objects more nearby the vibration frequency will be higher..
  • One button design, easy to use for underwater and DIY at home. It can look for locating metal pipes, wires, reinforced concrete, metal screws and thumbtacks , and jewelry you lost at home..
  • The white illumination LED in front of the pinpointer can provides illumination in the situation that is the dark and underwater and help to look for metal objects.
Check Stock

RYOBI RTS08 13 Amp 8-1/4 in Table Saw

  • 6.5 amp, 10,000 rpm motor of the joiner tool provides power for working in the hardest woods.
  • Dual rack and pinion fence of the plate joiner ensure blade and fence are always parallel for accurate joints every time.
  • Integral one-piece fence of DEWALT joiner is adjustable and tilts 0-90 degree.
  • Flush cuts can be made at 0 degree without removing fence.
  • 45-degree locating notch in fence allows indexing off the outside surface of a mitered joint.
Check Stock

uxcell 10 x 100mm(Approx 25/64') Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves

  • 【Size】 Diameter:10mm/0.39" and Tolerance:+0.0008"/-0.0008",Height:100mm/3.93" and Tolerance:+0.02"/-0.02".
  • 【Material】: These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life..
  • 【Easy to install】: This cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase..
  • 【Application】: Mainly used for wooden products, double bed, bookshelf, shelf, outdoor shade shed, cabinet partition, etc..
  • metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application.
  • 【Notice】: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 10 mm).
Check Stock

Celestron Nexstar 6SE Schmidt-Cassegrain Telescope + Celestron Nexstar Case

  • StarBright XLT high transmission coatings come standard.
  • StarPointer finderscope to help with alignment and accurately locating objects.
  • Quick-release fork arm mount, optical tube, and accessory tray for no-tool setup.
  • SkyAlign allows you to align on any three bright celestial objects, making for a fast and easy alignment process.
  • Nearly 40,000 object database with 200 user-definable objects and expanded information on over 200 objects.
Check Stock

uxcell 10 x 90mm(Approx 25/64') Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves 2Pcs

  • 【Size】 Diameter:10mm/0.39" and Tolerance:+0.0008"/-0.0008".
  • Height:90mm/3.54" and Tolerance:+0.02"/-0.02".
  • 【Material】: These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life..
  • 【Easy to install】: This cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase..
  • 【Application】: Mainly used for wooden products, double bed, bookshelf, shelf, outdoor shade shed, cabinet partition, etc..
  • metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application.
  • 【Notice】: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 10 mm).
Check Stock

Handheld Colorimeter Color Difference Meter with Built-in White Plate 4mm Measuring Aperture

  • ◆ Illuminating/Viewing Geometry: 8°/d.
  • ◆ Double locating: Illuminating locating and precise cross locating..
  • Built-in white plate parameters, no need to do calibration..
  • ◆ 4mm measuring aperture Widely used in food, chemical industry, electronics, automobile, food and other fields..
Check Stock

Colorimeter Color Analyzer Meter SC-10 Color Difference Reader D65 4mm Lab Delta E Portable

  • Hand-held structure, small and convenient, make the measurement easier.
  • New integrating sphere design for more stable measurement.
  • Built-in white plate parameters, no need to calibrate each time which realize rapid measurement.
  • Double locating: illuminating locating and cross locating.
  • Equipped with rechargeable high-capacity li-ion battery..
Check Stock

SC-10 Simplified Portable Colorimeter Color Analyzer Meter Color Difference Reader D65 4mm Lab Delta E

  • Hand-held structure, small and convenient, make the measurement easier.
  • Built-in white plate parameters, no need to calibrate each time which realize rapid measurement.
  • Equipped with rechargeable high-capacity li-ion battery.
  • New integrating sphere design for more stable measurement.
  • Double locating: illuminating locating and cross locating..
Check Stock

SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K - KCVB2419

  • ...ndle, and an SSD holder. The basic handheld kit for Blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
  • 【MOUNTING POINTS】SMALLRIG 2419 features multiple mounting points including NATO Rail, 1/4"-20 & 3/8"-16 Holes, Locating Holes for ARRI, and Cold Shoe Mount. The cage rig for BMPCC 4K & 6K is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
  • 【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
  • 【Mount for Samsung T5 SSD】The SSD holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. This is a basic and light handheld kit for BMPCC 4K & 6K users.
Check Stock

MILLING INDEXING 4'/ 100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK (WITH 65 MM 3 JAWS SELF CENTERING CHUCK)

  • Quality Tool Set of 4" Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit.
  • Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground..
  • Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table..
  • It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero..
  • QUICK FAST DELIVERY THROUGH EXPEDITED SERVICE WITH A TRACKABLE AWB NO. TO USA & WORLWIDE..
Check Stock